numskull 82333 Halo Gaming Locker Instruction Manual

Xbox Gaming Locker

CONTENTS:

xl Gaming locker – Unit is supplied as a kit of parts for self-assembly see instructions below:Games and accessories not included:

ASSEMBLY GUIDE:

The unit is supplied as a kit of parts – see diagram for exploded view, simply clip into place and secure were shown with the screws provided.

Step 1: Take section 5 (drawer) and place it onto the slots on section 4 (base).	Step 2: Take Section l and connect to section 4 (base) connecting posts.
Step 3: Take Section 1O and place into the slot of section l (observing chamfered edge to the back).	Step 4: Take section 2 and place section 1O into the slot as detailed in pie, this is achieved by angling section 1O.
Step 5: Push section 2 into section 4 (base) connecting posts.	Step 6: Take section 3 and connect to sections l and 2 correct orientation is labelled L&R.
Step 7: Take section 8 and connect to section 3 using the provided screws and screwdriver.	Step 8: Take section 6 (left door) and connect to the section using the provided screws and screwdriver.
Step 9: Take section 7 (right door) and connect to section 2 using the provided screws and screwdriver.	Step 1o: Take section 9 x 4 PCS and secure into the slots provided in sections l & 2.

Complete!

FEATURES:

• All in one tidy
• Safe secure housing for your Games, Control pads and Headphones”
• Drawer provided for small accessories.
• Locker doors for concealment of gamesTo see a video on how to build this locker simply visit: https://youtube.com/NumskullDesigns

TECHNICAL SUPPORT

If you encounter a problem with your product, please go to http://www.numskull.com and click Technical Support.From there you will be able to access the “Frequently Asked Questions” section, and contact details.Alternatively, you can contact us at Email: [email protected]International Telephone: +441707 502280The names of actual products and companies mentioned on this product may be the trademark of their respec­ tive owners. This product is not sponsored, endorsed, licensed or  approved by Sony, Microsoft, or Nintendo

WARRANTY INFORMATION

Worldwide, Rubber Road Ltd warrants to the consumer that all Numskull products will be free from material defects and manufacturing flaws for a period of one (1) year from the original date of purchase. Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow? If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support).Within the context of this warranty, the consumer’s defective product will at the Technical Supports option, be either repaired or replaced. Where authorized by applicable law, the full liability of Rubber Road and its subsidiaries (including for indirect damages) is limited to the repair or replacement of the Numskull product. The consumer’s legal rights with respect to legislation applicable to the sale of consumer goods are not affected by this warranty.This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident,  normal wear, or any other cause not related to a material defect or manufacturing flaw; (2) in the event of failure to comply with the instructions provided by Technical Support;  (3) to software not published by Rubber Road, said software is subject to a specific warrant provided by its publisher.

AUSTRALIAN & NEW ZEALAND WARRANTY

These goods come with guarantees that cannot be excluded under the Australian Consumer Law and New Zealand Consumer Guarantees Act. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

If purchased in Australia or New Zealand, this product comes with a one-year (12 months) warranty from the date of purchase. Defects in the product must have appeared within one year from the date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s returns policy and procedures. Any expense incurred as a result of returning the product to the retailer of purchase is the full responsibility of the customer.

Registered Community Design 00796325 US Patent Pending

Made in China