NVOPERANG Wireless Stereo Headset HX801s Instructions

NVOPERANG Wireless Stereo Headset HX801s

Box Contents

1. A headset
2. A Charging Cable
3. A Instructions
4. Three Earmuffs

Know your

1. Answer, Hang up
2. MIC
3. Volume-
4. Volume+
5. ON/OFF
6. LED
7. USB
8. Forward button
9. Backward button
10. Play/Pause

Charging

Before using your headset, follow these steps:Make sure that your headset is fully charged.Keep a fully charged headset with enabled mobile phone connected with,Before first use, we recommend first battery is fully charged.Please insert the charging plug to charge the headset jack, can be used to connect the AC power chargeAppliances, can also be connected to PC on USS data cable, charging, the red indicator light.

On/Off

1. headset boot: Please dial key switch to “ON” file, blue lightAfter a bright red light flashes twice every second, which means that is turned on.
2. headset off: Keep the switch button dial to “OFF” file, the red light flashes twice every one second, Indicates off.

Paired with Your Phone

1. To ensure the smooth pairing, as close to the phone and headset (shouldbe less than 1 m distance). Alternately flashing red and blue lights, Headset into pairing mode state.
2. Open the phone’s function and enter Scan for devices(please refer to the phone Manual operation), after scanning is complete will display all the searched devices, Select your phone pairing list “HX801S” Words, follow the prompts pairing
3. Enter the default password “0000” to confirm the completion of the pairing. When the headset indicator light flashes blue Flashes when the headset with your phone to complete the pairing and connectionNote: How Your phone is version 2.1 or later version, the use of earNot need to enter a password when paired machine.

Headset Mode Operation

LED Indicator Operation

Troubleshooting

If you fail to successfully connect the headset with the phone on or normal use, try the following steps:

• Make sure your phone is turned on the function to verify that paired the headset with your phone
• Check the headset with your phone if more than 10 meters away, whether electronic products between Or signal interference power, etc.
• Headset can store eight paired devices, or headset pairing list is full, then Times paired with the headset
• If the headset does not automatically connect or disconnect the phone while listening to music, re-charging Reboot your headset or pair
• When the music silent, please carefully check whether your device under the minimum volume
• Please check the battery is fully charged, if full, the red light is off

Care and Maintenance

• Consider turning your headset off before placing it in your pocket or bag, If the button is accidentally activated, Your mobile phone may place an unintended call.
• Do not expose the headset to liquid ,moisture or humidity as it is not waterproof.
• Do not use abrasive cleaning solvents to clean the headset
• Do not expose the headset to extreme temperature conditions. The best store temperature range is from -10 to +60, otherwise the life of the headset will be influenced
• Do not dispose of the headset is a fire as it this may result in an explosion Do not bring your headset into contact with sharp objects as this will cause scratched and damage
• Do not attempt to disassemble the headset assist dose not contain serviceable components
• If you do not use the headset for long periods ,be sure to store it in a dry place, free from extreme
• Temperature conditions and dust.

Product Specifications

1. v5.0 Class 2
2. Distance coverage up to 15 meters
3. Support headset, handsfree, A2DP & AVRCP Profiles
4. Charging time: 2 hours
5. Music Playing / Talk time: 18-24 hours
6. Power Rating 17 mW
7. Speaker 32 oHM
8. Standby time: 360 hours
9. Frequency Table: 2400.0-2483.SMHz unlicensed ISM band
10. Sensitivity:< -82dBm at < 0.1 % BER
11. Rechargeable 200 mA/h li-polymer battery
12. Work Voltage DC 3.3V TO 4.2 V
13. Charger : DC SV (300mA)
14. Weight: 48g

report this ad