Oben Tripod Vlogging Kit With Ring Light User Manual
INTRODUCTION
Thank you for choosing Oben.The Oben TTVLK Tripod Vlogging Kit features a desktop tripod, accessory arm, USB-powered LED ring light, and a smartphone clamp. It puts the tools you need to set up a vlog or video meeting anywhere.
Warnings
Warnings:
- Please read and follow these instructions, and keep this manual in a safe place.
- Keep this unit away from water and any flammable gases or liquids.
- Do not stare directly at the lights when they are powered on.
- Clean the unit with a soft, dry cloth.
- Keep this unit away from children.
- Make sure the item is intact and that there are no missing parts.
- All images are for illustrative purposes only.
OVERVIEW
Ring Light
A: LED arrayB: USB cableConnect to a computer or USB plug adapter.C: 1/4-20 mounting socket
Ballhead
D: 1/4-20 screwAttach to smartphone adapter.E: Locking knob Loosen to adjust theangle. Tighten to secure.F: 90° notch Switch from horizontal tovertical camera orientation.G: 1/4-20 accessory socket Attach the accessory arm.H: 1/4-20 socket Screw onto thetabletop tripod.
Accessory Arm
I: 1/4-20 screwJ: ThumbscrewsK: 1/4-20 locking nutAttach to the tripod accessory socket.Important! For secure support of the ring light, make sure the accessory arm is positioned directly over one of the legs.
Tripod
L: 1/4-20 screwAttach the ballhead.
M: Leg release buttonPress to spread the legs to the maximum base.Close the legs to use the tripod as a handheld grip.
Important! Set the tripod to its widest base when the ring light is attached.
Controller
N: Color temperatureSelect cool, warm, or neutral color temperaturesettings.O: Power buttonPress to turn the light on or off.P: BrightnessPress repeatedly to increase or decrease the 10-step brightness.
Smartphone Adapter
Q: Smartphone clampFits phones 2.4 to 3.5 inches wide.R: 1/4-20 socketsAttach to the ballhead.
SPECIFICATIONS
|
Input |
5 V |
|
Power Connector |
USB Standard-A |
|
Color Temperature |
3 step (cool, warm, neutral) |
|
Brightness |
10 step |
|
Smartphone Compatibility |
2.4 to 3.5 in. (6.1 to 8.9 cm) |
|
Cable Length |
6.3 ft. (2 m) |
|
Dimensions |
Height: 3.9 in. (9.9 cm) min6.9 in. (17.5 cm) maxRing Light Diameter: 8 in. (20.3 cm)Depth: 1 in. (2.5 cm)Accessory Arm Length: 10.5 in. (26.7 cm)Ballhead Height: 2.1 in. (5.3 cm) |
|
Load Capacity |
2.2 lb. (1 kg) |
Our WEB: wwww.obensupports.com
References
[xyz-ips snippet=”download-snippet”]