499 PNEUMATIC TASK CHAIR OPERATING INSTRUCTIONS
FEATURE
- HEIGHT ADJUSTMENTTo raise seat remove pressure from seat and lift lever (1). To lower seat height sit on chair and lift lever(1).NOTE: It is normal for chair to slighly lower under body weight.
WARNING
- Use this product only one person at a time.
- Do not use this chair unless all bolts screws and knobs are securely tightened.
- Check that all bolts screws and knobs are tight every three months or as needed.
- Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
- Do not use chair as a stepladder.
- Use this chair for its intended purpose only.
- Use mild detergent only for cleaning.
GENERAL CHAIR WARRANTY
Office Star General chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
- 2 Years on all non-moving metal parts.
- 1 Year on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
- 1 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail , by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. – 5:00 p.m. Pacific Time.
Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct.
STEP 1 Insert five Casters (2) into Base (1), push hard until you hear or feel Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1) and slipBellows (4) over Pneumatic Cylinder (3).
STEP 2 Secure Lever (11) to Seat Plate Back Support (5) using Lever Plate (12) and four Lever Plate Screws (10).FULLY TIGHTEN LEVER PLATE SCREWS (10) SCREWS.
STEP 3 Secure Seat Plate Back Support (5) to Seat Cushion (6) using four Seat Plate Screws (9). FULLY TIGHTEN SEAT PLATE SCREWS (9).
STEP 4 Secure Back Cushion (6) to Seat Plate Back Support (4) using three Back Cushion Screws (7).FULLY TIGHTEN BACK CUSHION SCREWS (8).
STEP 5 Place the assembled seat on top of Pneumatic Cylinder (3) and apply pressure.ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
OFFICE STAR 499 Pneumatic Task Chair Operating Instructions Manual – OFFICE STAR 499 Pneumatic Task Chair Operating Instructions Manual –
[xyz-ips snippet=”download-snippet”]