OHIO STEEL 4048PS-ATV 12.5 cu ft Poly Swivel ATV Dump Cart Owner’s Manual

PROFESSIONAL GRADE

048PS-ATV12.5 cu ft POLY SWIVEL ATV DUMP CART

READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT

Safety Rules

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Read and understand all safety rules and operating instructions before using this ATV/UTV attachment.Follow all safety rules and operating instructions provided by your vehicle’s manufacturer when using attachment.Never allow children or untrained persons to operate vehicle or attachment.Do not exceed the vehicle manufacturer’s towed weight limit.Reduce vehicle speed and allow extra stopping distance when towing heavy loads.Reduce vehicle speed and towed weight when operating on slopes.Operate up and down slopes, never across the face of slopes.Do not carry passengers on vehicle or attachment.Avoid sudden turns or maneuvers.Do not tow attachment on public roadways.Do not remove warning decals from product.Check product for worn, loose, or damaged parts before each use. If any damage  is present, repair the product before using.Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.Do not exceed vehicle speed of 20 miles per hour when towing Dump Cart.Do not exceed Dump Cart rated weight capacity of 1250 pounds.

Carton Contents

TOOLS REQUIRED FOR ASSEMBLY:

  • 9/16″ Wrench and Socket
  • 1/2″ Wrench and Socket
  • Needle-Nose Pliers
  • Grease Gun

Assembly Instructions

  1. Attach Undercarriage to Poly Body and tighten hardware.
  2. Attach Front Support to Poly Body and tighten hardware.
  3. Insert Stub Axles into Undercarriage and secure with pins as shown.
  4. Slide Washers, Spacers and Wheels onto Stub Axles and install Cotter Pin. Bend legs of Cotter Pin to secure.
  5. Align holes in Swivel Clevis and Undercarriage and install Pin as shown. Secure Pin on both ends with Hairpins.
  6. Attach Ball Coupler and Bracket to Drawbar and tighten hardware as shown.

Operating Instructions

Before Using Dump Cart:

  1. Apply lithium grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel.
  2. Check tire pressure and inflate to 24 psi if needed.
  3. Read all Safety Rules found on page 1.

How to Use Dump Cart:

  1. Attach Dump Cart to your ATV or UTV.
  2. Do not exceed 1250 pounds when loading material into the cart body.
  3. Distribute the weight of the load as evenly as possible in the cart body for best handling.
  4. When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
  5. Do not exceed 20 miles per hour when towing Dump Cart.

How to Empty Dump Cart:

  1. Step down the foot pedal to release the latch mechanism.
  2. Lift the body and swivel as desired to guide the material to preferred location.
  3. Lift the body entirely and empty material.
  4. Lower the body and guide the latch into the drawbar and relatch.

Periodic Maintenance:

  • Tighten fasteners as needed before each use
  • Check tire pressure before each use
  • Grease wheels annually

Do-It-Yourself Accessories

Warranty

If this product fails due to a defect in material or workmanship within TWO YEARS from the date of purchase, we will at our option repair or replace it free ofcharge. This warranty excludes tires and wheels, which are expendable and become worn during normal use.

This warranty does not cover: 

  • Repairs necessary because of operator abuse or negligence.
  • Equipment used for commercial or rental purposes.
  • Paint that is worn or faded due to normal use or exposure.

To arrange for product repair call 1-800-652-2321, or return this product to the place of purchase for a replacement.This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty applies only while this product is in use in the United States.

In the space below record the purchase date of your Dump Cart.Model Number 4048PS-ATVPurchase Date______________________________Keep this Owner’s Manual and your receipt in a safe place for future reference.

After the two year warranty period all replacement parts may be ordered by calling 1-800-652-2321.When ordering replacement parts, always give the following information:

  • Product 12.5 cu ft POLY SWIVEL ATV DUMP CART
  • Model Number 4048PS-ATV
  • Part Number_____________
  • Part Description__________

Repair Parts

report this ad

ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY
1 311161 POLY BODY 1 21 6000305 FOOT PEDAL 1
2 6000320 UNDERCARRIAGE 1 22 6000309 LATCH 1
3 6000311 FRONT SUPPORT 1 23 6000321 CLEVIS, SWIVEL 1
4 6000727 WHEEL 2 24 300061 HEX NUT, 3/8-16 C-LOCK 4
5 6000523 AXLE, STUB 2 25 6000369 SHOULDER BOLT, 1/2″ X3/8″ 1
6 308301 COUPLER, 1-7/8″ BALL 1 26 6000324 BEARING 2
7 6000760 BRACKET, COUPLER 1 27 3000720 WASHER, 3/8″ USS 1
8 300121 SPACER 2 28 300075 WASHER, 1/2″ USS 1
9 300087 COTTER PIN, 3/16″ X1-1/2″ 2 29 6000368 WASHER, SPRING 1
10 300076 WASHER, 1″ SAE 4 30 6000325 SPRING, LATCH 2
11 3000811 CLEVIS PIN, 1/4″ X1-1/2″ 2 31 6000370 HEX BOLT, 3/8-16 X3-1/2″ 4
12 3000812 HAIRPIN COTTER, 1-3/16″ 2 32 300055 HEX BOLT, 3/8-16X3″ 1
13 3000528 HEX BOLT, 5/16-18 X1-1/2″ 4 33 6000371 PIN, 1/2″ X2-13/32″ 1
14 6000373 HEX BOLT, 5/16-18 X3″ 8 34 6000372 HAIRPIN COTTER, 1-9/16″ 2
15 6000409 LOCKWASHER, 5/16″ (BLACK) 12 35 6000323 DRAWBAR ASSY (incl. 20-34) 1
16 6000410 HEX NUT, 5/16-18 (BLACK) 12 36 6000764 OWNERS MANUAL 1
17 3000511 HEX BOLT, 3/8-16 X1″ 4 37 6000761 HARDWARE BAG, 4048PS-ATV 1
18 300077 WASHER, 3/8″ SAE 8 38 6000162 DECAL, OSI PRO 1
19 3000618 LOCKNUT, 3/8-16 6
20 6000322 DRAWBAR 1

www.OHIOSTEEL.com(800) 652-2321

References

[xyz-ips snippet=”download-snippet”]