OLIGHT Baton 3 Wireless Charger User Manual

Baton 3 Wireless ChargerThank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!

IN THE BOX

SPECIFICATIONS

PRODUCT OVERVIEW

CHARGING

* Before first use please fully charge the product.

DANGER

• DO NOT remove or replace the built-in battery of the charger.
• DO NOT put the charger into fire or heat it.

WARNING

• DO NOT short-circuit the charger’s magnetic charging port with any conductors.
• DO NOT forcefully press the elastic contact inside the charger to avoid damage.

NOTICE

• If you charge the wireless charger with a flashlight inserted, the power source will charge the flashlight first when its capacity is below 5V  1A. In this case, the external indicator will indicate the charger’s remaining power instead of the charging status.
• When the charger’s power runs low while charging a flashlight, the internal indicator will flash red as the external indicator does.
• The smart deactivation function is not compatible with the S1R II.

DISCLAIMER

• DO NOT put a turned-on S1R II into the charger and close its lid. The charger may be damaged by overheating.
• Please keep the magnetic charging port of the charger and the tail cap of the flashlight clean. Otherwise, it may fail to charge the flashlight or to deactivate the powered-on Baton 3.

HOW TO OPERATE

CHARGING THE WIRELESS CHARGERThe external indicator above the type-c port of the wireless charger will light up red to indicate charging and turn green to indicate that charging is complete.Note: If you charge the wireless charger with a flashlight inside, the USB power source will charge the flashlight first when its capacity is below 5V 1A and will charge both simultaneously when its capacity is above 5V 1A.CHARGING A FLASHLIGHT WITH THE WIRELESS CHARGERThe internal indicator of the wireless charger will light up red to indicate charging and turn green for 10 seconds to indicate that charging is completed before turning off.SMART DEACTIVATION OF BATON 3When the wireless charger is closed with a powered-on Baton 3 inside, it will shut down the Baton 3 automatically. To ensure this works,  please keep the tail cap of the Baton 3 and the magnetic charging port of the charger clean. This function is not compatible with the S1R II.

LOW VOLTAGE ALERT

When charging the flashlight, the external indicator will flash red to alert the user if the power level of the wireless charger is below 10%.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.Baton 3 Wireless Charger: Two YearsFor any of the fragile or low-value fittings not covered above, like lanyard and clip, you can contact the post-sale within 30 days of the purchase, if it has any quality drawback or damage under normal use condition. If such drawback or damage occurs after 30 days of the purchase or under abnormal use condition, we will only offer conditional quality assurance as appropriate.

EU DECLARATION OF CONFORMITY

https://olightworld.com/ec-declaration

EU-Declaration of Conformity can be found here: https://olightworld.com/ec-declaration

USA Customer Support[email protected]Global Customer Support[email protected]Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

Made in ChinaB. 03, 02, 20213.0331.6010.9007

References

• 
  Olightworld.com.Olight Flashlights, Tactical Light, Outdoor Light, Weapon Light
• 
  Olightworld.com.Olight Flashlights, Tactical Light, Outdoor Light, Weapon Light
• 
  Olightworld.com.Olight Flashlights, Tactical Light, Outdoor Light, Weapon Light
• 
  Olightworld.com.Olight Flashlights, Tactical Light, Outdoor Light, Weapon Light