omnicharge Omni 20+ User Manual

omnicharge Omni 20+

BEFORE USING

Calibrate the battery

To make sure the battery percentage reading is correct, make sure to calibrate the battery within the first seven days of receiving the product.

It’s easy to do. Follow these steps:

  1. Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen.
  2. Fully charge your Omnicharge to 100% to finish the calibration.

Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty

PORTS AND BUTTONS

Note: For optimal wireless charging, place phone horizontally towards the back of the Omnicharge.

  1. AC Outlet
  2. Power and Menu Button
  3. USB Button
  4. AC Outlet Button
  5. Quick Charge USB (QC 3.0 Compatible)
  6. 5V/3A USB-A Port
  7. DC Input/ Output (5.5 x 2.1mm Barrel Port)
  8. USB-C Input/ Output
  9. Wireless Charging

BUTTON FUNCTIONS

PRIMARY CONTROLS

  • Long press to power on
  • Long press to power off
  • On/Off AC Outlet
  • On/Off USB Ports

MENU CONTROLS

  • Double press to enter the menu
  • Quick press to select
  • Move Up
  • Move Down

SCREEN

OLED screen with real time metrics

  1. Status Icons
  2. Power Input (watts)
  3. Battery Power Output (watts)
  4. Battery Temperature
  5. DC Output Voltage
  6. Battery Percentage

Note: When you are pass-through charging, the battery output field will show a lower value and can even show 0W output, since the output field is showing how much power is output from the battery and not how much is output from the port.

SCREEN ICONS

AC OUTPUTAC outlet is activated. USB OUTPUTUSB ports are turned on
HVDC OUTPUT HVDC(high voltage DC) is activated. CHARGING INPUTYour Omnicharge is being charged.
USB-C OUTPUT60W USB-C output is activated OPTIMAL CHARGINGCharging at maximum power.
ADJUSTABLE DC OUTPUTAdjustable 5V-25V DC output is activated. SOLAR CHARGINGCharging from solar power.
LOW TEMPERATURE PROTECTIONBattery’s temperature is too low, the charging circuit is shut off Wireless ChargingWireless charging is active.
LOW POWER PROTECTION (ONLY DURING PASS-THROUGH)Occurs when outgoing power is higher than incoming power and battery is empty. Omnicharge will cut off the outgoing power until a sufficient battery level has been reached.
OVERPOWER PROTECTIONDevice is drawing too much power. Omnicharge will limit or cut off the output power
OVERHEATING PROTECTIONBattery temperature is too high. Omnicharge will limit or cut off its input and output power.
OVERVOLTAGE PROTECTIONBarrel input voltage exceeds the 36V limit. Input charging circuit is shut off

MENU NAVIGATION

  1. DC OUTTurn on DC output and set the voltage and amperage
  2. WALL SOCKETChoose whether the AC outlet will output 120V AC or 150V HVDC
  3. USBChoose whether your USB-A ports are on or off when you turn on your Omnicharge. The default setting is on.
  4. SCREEN OFF TIMERSet the screen auto shut-off time here. The default setting is 5 min.
  5. AUTO SHUT DOWNSet the power auto shut-off time here. The default setting is 5 min.
  6. TEMPERATUREChoose whether your temperature is displayed in Celsius or Fahrenheit
  7. BUTTON LIGHTChoose whether the button lights are on or off. The default setting is on.
  8. TIME REMAININGChoose whether the time remaining is displayed
  9. LANGUAGEChoose the screen language
  10. FACTORY RESETReset the Omnicharge to the factory settings
  11. ABOUTFind the model name, capacity, firmware version, and serial number information here.

AC OUTLET

Max output power: 100W

To change the AC output mode, double press the Power Button to enter the menu and select Wall Socket.

  1. Choose 120V AC/150V HVDC mode in the menuNote:Only choose 150V HVDC if you are using a switch mode power supply, such as a laptop’s AC power adapter. Check our support page at www.omnicharge.co for more detailed information.
  2. When AC/HVDC is active, the following icons should appear on the screenAC output  HVDC output
  3. Power any device.  

DC OUTPUT

5V – 25V with 0.1V Accuracy, up to 5A (100W max)

The DC output feature can directly charge your laptop without needing your laptop charger.Warning: Before using DC Output make sure you know the correct voltage for your laptop.Using the wrong voltage can damage your device.

Note: For more information visit our support page at www.omnicharge.co/support

Set voltage and amperage through the menu

Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.

Once active, the DC icon will appear.

Power your device through the DC port.

You can purchase additional DC cables from our website. For more information about available accessories, please visit www.omnicharge.co/products

USB-C PORT

USB-C port max output: 60W

The USB-C port is plug-and-play. Plug your USB-C device into the USB-C port to start charging

Note: If your USB-C output does not start charging, try to reconnect the USB C cable

Power any USB-C device.   

RECHARGING FROM THE USB-C PORT

USB-C port max input: 45WFully recharge in 3 hours

Plug in a USB-C wall charger and it will start recharging the Omni 20+.

Note: If the Omnicharge does not detect incoming power, try to plug in your USB-C charger while the Omnicharge is turned off. Once charging has started, you can power on the Omnicharge to utilize pass-through charging.

USB-A PORTS

5V⎓3A, 9V⎓2A, 12V⎓1.5A QC3.0 compatible

  1. Choose whether the USB output is on or off by default.

RECHARGING FROM THE BARREL PORT

DC Input 5V – 25V, Up to 3A (2W – 45W)

Charging your OmnichargeUse any AC wall charger, or other power adapters like your laptop charger to recharge your Omnicharge.

Note: Make sure the output voltage of your adapter falls within 5V – 25V range. The Omni 20+ only accepts 5.5 x 2.1mm barrel plugs.

TECHNICAL SPECIFICATION

GENERAL
Weight 1.35 lbs (611 g)
Dimension 5.0″x 4.8″x 1.1″(12.7 x 12.2 x 2.7 cm)
USB-C
Bidirectional Input/output charging
Input USB-PD, 5V~20V, up to 3A, 45W max
Output 5V⎓3A，9V⎓3A，12V⎓3A，15V⎓3A，20V⎓3A, up to 3A, 60W max
USB-A Output
Port1 QC 3.0，5V⎓3A，9V⎓2A，12V⎓1.5A
Port2 QC 3.0，5V⎓3A，9V⎓2A，12V⎓1.5A
DC Port
Bidirectional Input/output charging
Input 5~25V, up to 3A, 45W max
Output 5~25V, up to 5A, 100W max
AC PORT 
120V AC, 60Hz, 100W max US version
230V AC, 50Hz, 100W max EU version
WIRELESS CHARGING
Output 10W
CAPACITY
6 cells, 70Wh max at 3.7V
OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤2000m
MADE IN CHINA

© 2021 Omnicharge. is a trademark of Omnicharge Inc

CUSTOMER SUPPORT

All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at [email protected].

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,