omnicharge Omni Ultimate User Manual

Table of Contents

Omni UltimateUser Manualwww.omnicharge.co

POWER YOUR NEXT ADVENTUREFor more information visit our support page at www.omnicharge.co

WARNING

SAFETY AND HANDLING

Read all instructions and cautions carefully before use to avoid personal injury or damage to the unit and any connected products

HandlingSet up your Omnicharge on a hard, stable work surface which allows for adequate air ventilation around the power bank. Omnicharge can be damaged if dropped, burned, punctured, crushed, exposed to heat or moisture or if it comes in contact with liquid. Do not use a damaged Omnicharge as it may cause injury.
Shock or Fire HazardThis Omnicharge generates the same potentially lethal AC power as a normal household wall outlet. Please use it carefully just like using a normal AC wall outlet. DO NOT insert foreign objects into outputs or ventilation holes
DC OutputImproper use of DC Output may harm your device. Consult with your device manufacturer to check the designated voltage before use.
RecyclingThe battery in your device should be serviced or recycled by an authorized service provider and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. If no laws or regulations govern, dispose of your omnicharge in a waste bin for electronics.
RechargingThe Omnicharge needs to be recharged within 7 days of purchase and every 6 months to maintain optimal battery health. Failure to do this can cause the battery to over-deplete and will not be covered by warranty.

Any manipulation to the unit or its components will void all warranties

BEFORE USING

Calibrate the batteryTo make sure the battery reading is correct, please calibrate the Omnicharge battery when you first receive the product and periodically in the future.It’s easy to do. Follow these steps:

Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen.
Fully charge your Omnicharge to 100% to finish the calibration.Note: The Omnicharge battery needs to be recharged at least every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction and is not covered by warranty.

PORTS AND BUTTONS

1. Power and Menu Button	5. DC Input Port
2. AC Outlet Button/Move Up	6. USB-A Ports
3. DC Outlet Button/ Move Down	7. USB-C Input / Output Por
4. AC Outlet	8. DC Output Port

BUTTON FUNCTIONS

	• Long press to power on• Quick press to turn screen display on/off		• On/Off AC outlet• Quick press DC out settings• Long press to output the last set output value directly
	• Double press to enter the menu• Quick press to select		• Move Up• Move Down

SCREEN

OLED screen with real-time metrics

1. Status Icons	4. Battery Temperature
2. Total Input Wattage	5. USB-C/Barrel DC Output Voltage
3. Total Output Wattage from the Battery	6. Battery Percentage Remaining

SCREEN ICONS

	AC OUTPUTAC outlet is activated		OVERPOWER PROTECTIONDevice is drawing too much power. Omnicharge will limit or cut off the output power.
	USB OUTPUTUSB ports are turned on.		OVERHEATING PROTECTIONBattery temperature is too high. Omnicharge will limit or cut off its input and output power.
	USB-C OUTPUT60W USB-C output is activate		OVERVOLTAGE PROTECTIONBarrel input voltage exceeds the 32V limit. Input charging circuit is shut off.
	ADJUSTABLE DC OUTPUTAdjustable 5V-60V DC output is activated.		CHARGING INPUTYour Omnicharge is being charged.
	LOW-TEMPERATURE PROTECTIONThe battery’s temperature is too low and the charging circuit is shut off.		OPTIMAL CHARGINGCharging at maximum power.
	LOW POWER PROTECTION (ONLY DURING PASS-THROUGH)Occurs when outgoing power is higher than incoming power and battery is empty. Omnicharge will cut off the outgoing power until a sufficient battery level has been reached.		SOLAR CHARGINGCharging from solar power.

MENU NAVIGATION

	While the screen is on double press the power button to enter the menu
	When in the menu, navigate up and down using the buttons on the right of the screen. Use the power button to enter the selected menu item.

DC OUTTurn on DC output and set the voltage and amperage.
USBChoose whether your USB-A ports are on or off when you turn on your Omnicharge. The default setting is on.
SCREEN OFF TIMERSet the screen auto shut-off time here. The default setting is 5 min.

MENU NAVIGATION

5. AUTO SHUT DOWNSet the power auto shut-off time here. The default setting is 5 min.6. TEMPERATUREChoose whether your temperature is displayed in Celcius or Fahrenheit7. BUTTON LIGHTChoose whether the button lights are on or off. The default setting is on.8. ABOUTFind the model name, capacity, firmware version, and serial number information here.

AC OUTLET

Max output power: 120W

Quick press AC Output Button to turn the AC outlet on/off
The AC icon should appear on the screen

AC 120V/230V AC output

Power any device

Note: Due to the high power pure sinewave AC output, you might experience some electrical interference on the USB-A and USB-C ports when simultaneously outputting from the AC outlet.

DC OUTPUT

5V – 60V with 0.1V/A Accuracy, up to 8A (150W max)

The DC output feature can directly charge your laptop without needing your laptop charger. Warning: Before using DC Output make sure you know the correct voltage for your laptop. Using the wrong voltage can damage your device.Note: For more information visit our support page at www.omnicharge.co/support

Set the voltage and amperage through the menu (You can also click the DC Output Button to jump to Step 2)

Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.

DC icon will appear on the screenAdjustable DC output

Power your device through the DC port (MR30)USB-A PORTS

5V=3A, 9V=2A, 12V=1.5A QC3.0 compatible

USB-C INPUT/OUTPUT PORT5V, 9V, 12V, 15V, 20V, up to 3A 60W max

THE OMNICHARGE CAN BERECHARGED IN A VARIETY OF WAYSDC Input 5-25V, 4.5A max, 90W maxUSB-C Input 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A, 60W max

Charging from the WallUse the included AC wall charger, or other power adapters like your laptop charger to recharge your Omnicharge.Note: Make sure the output voltage of your adapter falls within the 5V – 25V range.The Omni Ultimate can accept 5.5 x 2.5 mm barrel plugs.

TECHNICAL SPECIFICATION

GENERALWeight: 3.08 lbs (1.4 Kg)Dimension: 6.6″x 5.7″x 2.1″(167.5 x 145 x 54 mm)USB-CBidirectional Input/output chargingInput: USB-PD, 5V~20V, up to 3A, 60W maxOutput: 5V=3A=9V=3A=12V=3A=15V=3A=20V=3A, up to 3A, 60W maxUSB-A OutputPort1: QC 3.0，5V=3A，9V=2A，12V=1.5APort2: QC 3.0，5V=3A，9V=2A，12V=1.5ADC INPUTInput: 5~25V, up to 4.5A, 90W maxDC OUTPUTOutput: 5~60V, up to 5A, 150W maxAC PORT120V AC, 60Hz, 120W max US version230V AC, 50Hz, 120W max EU versionCAPACITY12 cells, 38400 mAh, 142Wh max at 3.7VOPERATING ENVIRONMENTTemperature 0°C-40°CHumidity 30-70%Altitude ≤2000m

THANK YOUwww.omnicharge.co

CUSTOMER SUPPORTAll Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at [email protected]

FOLLOW US