onn 12 Series Glass Screen Protector with Built-in Microbial Protection User Guide

Glass Screen Protectorwith Built-inMicrobial ProtectionQuick Start Guide

Cleaning

Remove the case from your device to avoid interference with the application.

1. Clean the ScreenClean the device screen with a wet wipe.
2. Dry the Screen
   Dry with the microfiber cloth. Ensure the screen is completely dry before proceeding.
3. Remove DustUse the dust removal sticker to remove any fine particles from the device screen.

Application Tray

1. Apply the TraySnap the orange application tray over the front of your device.Tip: Be sure the edge labeled “Top” is at the top of your device.

Screen Protector Application

1. Remove Safety FilmUsing the tab labeled “1-Back”, peel away to expose the adhesive, removing completely.Note: Do not touch adhesive on the glass.
2. Place the Screen ProtectorWith the adhesive facing your device place the screen protector down into the tray. Align the top edge of the glass and allow the glass to position itself into the tray. 
3. Attach the ScreenProtectorPress firmly down along the center to adhere to the screen protector.

Final Steps

1. Remove the TrayCarefully remove the application tray.
2. Remove Air BubblesIf there are any air bubbles, remove them by starting from the center and pushing firmly outward toward the edges.Note: Small bubbles may dissipate over the next 48  hours.