OPPO Mobile User Guide

Table of Contents

Greetings from OPPO Mobile

This guide will show you how to use the phone and its important functions. You may also visit OPPO’s official website to get more information about the phone.

1. Light & color temperature sensor2. Receiver3. Front Camera4. Volume Key5. Touch-screen6. SIM card tray7. Main MIC8. Proximity sensor9. Sub MIC10. Power Key & Screen Lock Key

11. Screen Fingerprint12. Speaker13. USB & Headphone Jack14. Wide-angle camera15. Laser focus16. Main camera17. Color temperature sensor & flash18. Third MIC19. Periscope camera20. NFC

Accessories and Software Information

You are provided with the following standard accessories:1 Phone, 1 Charger, 1 Earphone, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool.The product software version is: ColorOS V7.1For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at www.oppo.com/en/certification.

How to reboot the phone

Press and hold the Power Button and Volume Up Button at the same time until the OPPO boot animation is displayed to reboot the phone.

How to Transfer Old Mobile Content to a New Mobile

You can use the OPPO Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one.

If your previous phone was a non-OPPO Android phone, search “OPPO Clone Phone’ in the Google Play store and install the app. You can also scan the QR code below to install it. If your previous phone was an OPPO phone, you don’t need to install this app. Then run Clone Phone on both phones and follow the on-screen instructions.https://i.clonephone.coloros.com/download

If your previous phone was an iPhone, run “Clone Phone” on your new phone, and follow the onscreen instructions to migrate your data from your iCloud account.

Warning

Your device has been tested in a controlled environment and certified to be splash, water, and dust resistant in specific situations (meets requirements of classification IP68 as described by the international standard IEC 60529; test conditions: 15-35 C, 86-106 kPa, 1.5 meters, 31 minutes). The waterproof and dustproof levels might decrease as a result of normal wear. Do not charge your device in wet conditions.

CLASS 1 LASER PRODUCT

Class 1 Laser InformationThis device is classified as a Class 1 Laser product per IEC60825-1:2014. This device contains a Laser that could be damaged during repair or disassembly, which could result in hazardous exposure to infrared laser emissions that are not visible. This equipment should be serviced by OPPO or an authorized service provider.

Specification

Product	CPH2025
Main screen parameter	17.2cm(6.7″)
Dimension	Black: 165.2x74Ax8.8(mm) Orange: 165.2×74.4×9.5(mm)
Battery	DC7.74V 2085mAh/16.13Wh(Min) DC7.74V 2130mAh/16A8Wh(Typ) (Equaling toDC3.87V 4170mAh/16.13Wh(Min) DC3.87V 4260mAh/16.48Wh(Typ))
Camera	48Megapixels+48Megapixels +13Megapixels Rear32Megapixels Front
Operating temperature	0°C-35°C
SAR Values	CE SAR	0’883W/kg(Head)1.149W/kg(Body)

Note: The SAR values above are the highest values reported for this device.

Radio Waves Specifications

Radio	Frequency	Max. Output Power
GSM	850MHz	32.5±1dBm
900MHz	33±1dBm
1800MHz	30±1dBm
1900MHz	29.5±1dBm
WCDMA	Bands 1/5/6/8/19	24±1dBm
Bands 2/4	23±1dBm
LTE FDD	Bands 1/3/5/8/20/28	24±1dBm
Bands 2/4/12/13/17/18/19/25/26/66	23-11 dBm
Band 7	23.5±-1dBm
Bands 29/32	/
LTE TOD	Band 34	23.5±1dBm
Band 42	22.5t1dBm
Band 41	25±1dBm
Bands 38/39/40	24±1dBm
NR TDD NSA	MO	23±1dBm
n41/n77/n78/n79	24.2±1dBm
NR TDD SA	n41/n78/n79	25±1dBm
NR FDD NSA	n1/n3/n5/n7/n28A	23.2±1dBm
Bluetooth	2.4-2.4835GHz	9±2dBm(EIRP)
2.4G Wi-Fi	2.4-2.4835GHz	17.5±2dBm(EIRP)
56 Wi-Fi	5.15-5.35GHz; 5.47-5.7256Hz	16.5±2dBm(EIRP)
5.725-5.85GHz	10.5±2dBm(EIRP)
NFC	13.56MHz	s42dBuA/m @10m