OPT7 Black AURA RGB-W DRL LED Tube Headlights Projector -Bluetooth BUILT IN Full Color Installation Guide

Table of Contents

RGBW BLUETOOTHHEADLIGHTS2009-2014 FORD F-150INSTALLATI

_×2HEADLIGHT HOUSING_×1BLUETOOTH CONTROL BOX_×110FT EXTENSION CABLE_×1HARDWIRE POWER HARNESS

INSTALLATION

TOOLS NEEDED

SCREWDRIVERS (+ AND -)SOCKET WRENCHSOCKETS

STEP 1Remove the 2 bolts on top of the headlight.

STEP 2Release the plastic clip.

STEP 3Remove the last bolt retaining the headlight

STEP 4Pull forward to free the headlight assembly.

STEP 5Unclip the electrical connectors on the back of the headlight housing.

STEP 6Reattach the electrical connectors to the new headlight housing. Black and Green Wires: Not needed a connection for DRL Tube to function. Ensure the wires are tied up securely to ensure wires are organized and store away from any metal surface.

STEP 7Install the Aura Control Box by connecting the positive wire for a constant on functionality (always on when battery is on) or an accessory wire (only on when the vehicle is on) which can be found in the Fuse Box. Connect the negative wire to a ground wire.

STEP 8Connect the round connector from the headlight housings to the control box.

STEP 9Line up the headlight housing mounting tabs and push rearward to seat it in place.

STEP 10Attach the 3 bolts to secure the headlight in place.

STEP 11Replace the plastic clip.

STEP 12Test out your headlights using the AURA App.

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.