Oster BLSTSE75 Classic Blender Instruction Manual

Table of Contents

LIMITED EDITIONInstruction ManualCLASSIC BLENDERREAD ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

MODELS BLSTSE75

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of accidents (such as fire, electric shock, and/or injury to persons), including the following recommendations:READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

To protect against electric shock, do not place or immerse cords, plugs, or appliances in water or other liquid.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they DO NOT play with the appliance.
Never leave the appliance unattended when in use.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. Allow cooling before putting on or taking off parts, and before cleaning. To disconnect, turn the control to the off position, then unplug the power cord from the outlet. Do not disconnect by pulling on the cord.
In models with stand-by mode, a flashing light will indicate the appliance is ready for use. Avoid any contact with the blade or moveable parts.
DO NOT operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Take the appliance to the nearest Authorized Oster® Appliance Service Center for examination, repair or electrical or mechanical adjustment.
For appliances with markings on the plug blade: This appliance has important markings on the plug blade. The attachment plug or entire cordset (if the plug is molded onto the cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
The use of attachments, including canning jars, not recommended or sold by the manufacturer may cause fire, electric shock or injury.
Do not use outdoors or for commercial purposes.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces, including the stove.
Keep hands and utensils out of the jar while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
WARNING: Blade is sharp. Handle carefully, especially when removing the blade from the jar, emptying the jar, and during cleaning.
To reduce the risk of injury, never place the blade on the base without the jar properly attached.
Always make sure the jar is correctly placed onto the base before using the appliance.
Always operate blender with lid in place. Always wait until all moving parts have stopped before removing any lid or cover.
When blending hot liquids, remove the filler cap. Beware of steam.
Do not use appliances other than intended use. Misuse can cause injuries.Always use the appliance on a dry, stable, level surface. Never fill beyond the MAX fill line.
If your blender comes with a grounded plug, connect to properly grounded outlets only.For models with mini jars or Blend-N-Go portable cups:
Make sure the jar is correctly placed onto the base before using the appliance.
Do not blend carbonated, hot, or boiling liquids and ingredients, as this may create pressure buildup. Only blend non-carbonated liquids and ingredients that are at room temperature or cooler. If the jar is warm to the touch, allow cooling before opening.
Do not use the blender for longer than 1 minute at a time to avoid heat and pressure buildup. Allow cooling for 1 minute between cycles.For models with a food processor or food chopper attachments:
Keep hands and utensils away from moving blades or discs while processing or chopping food to reduce the risk of severe injury to persons or damage to the food processor or chopper. A scraper may be used but must be used only when the food processor or chopper is not running.
To reduce the risk of injury, never place a cutting blade or discs on base without first putting jar properly in place.
Be certain the lid is securely in place before operating the appliance.
For food processors: Never feed food by hand. Always use a food pusher.
Do not attempt to defeat the cover interlock mechanism.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLDS AND SIMILAR APPLICATIONS SUCH AS:

Shops, offices, and other working environments
Ranches and farmhouses
Guests at hotels, motels, bed, and breakfasts, and other residential environments

APPLIANCE DESCRIPTION

1. Filler cap2. Lid3. 5-Cup Glass Jar4. Sealing Ring5. Ice-crushing blade

6. Threaded jar bottom6b. FOR BRAZIL MODELS ONLY: Integrated blade assembly with threaded jar bottom7. Powerful Motor with exclusive All-Metal Drive® system for extra durability8. Control Panel – Rotary dial with 3 speeds

GETTING TO KNOW YOUR OSTER® BLENDER

For more than 7 decades, the Osterizer® brand has been present in countless homes, becoming one of the family and accompanying you in the most special moments. Today, we celebrate it with a Limited Edition.

YOUR PRODUCT INCLUDES THE FOLLOWING TECHNOLOGY AND FEATURES:DURABLE MOTOR – Your blender has a powerful motor with an exclusive All-Metal Drive™ystem for extra durability.LEAK-PROOF LID – The cover consists of two parts, the filler cap, and the leakproof lid. The cover is self-sealing and is made of a material that is resistant to the absorption of odors and stains. The filler cap is removable for use as a measuring cup and provides an opening for the addition of other ingredients.GLASS JAR RESISTANT TO BOILING INGREDIENTS* – The 5-cup glass jar is graduated for easy measurement and is molded of heat and cold resistant material.Before you use the product for the first time, separate the lid, jar lid feeder cap, and blade from the jar. Wash in warm, soapy water, or top rack in the dishwasher. Rinse and dry well.*Up to a thermal shock of 90°C

ASSEMBLING THE JAR

Turn the jar upside down so the small opening is at the top. (Figure 1)
Place sealing ring over jar opening. (Figure 2)
Place blade into the jar. (Figure 3)
Place threaded jar bottom over the blade and turn clockwise to tighten. (Figure 4)
Place jar assembly onto the base. (Figure 5)
Place ingredients into a jar.
Place lid with filler cap on the jar.
Plug the power cord into a standard household outlet of the same voltage as the one indicated in the rating plate of your blender. You are now ready to begin using your blender!

FOR BRAZIL MODELS ONLY:

Turn the jar upside down so the small opening is at the top. Place sealing ring over jar opening.
Turn the integrated blade assembly with the threaded jar bottom upside down and place it into the bottom of the jar. Turn clockwise while pushing down to tighten. Be sure the integrated blade assembly with threaded jar bottom is locked securely to the jar before use.
Place the jar onto the base.

MANUAL CONTROLS

Models with rotary dial control

Turn the dial to the desired speed and blend ingredients to desired consistency.
Turn the dial to the off “O” position to stop the blender and turn the blender off.
To use the PULSE function:• To use PULSE if the dial is on the off to the left of the dial position, turn dial to speed 1 for a brief desired length of time and turn it right back to the off “O” position.• To use PULSE if the dial is on the off position on the right of the dial turn dial to speed 3 for a brief desired length of time and turn it left back to the off “O” position.
Repeat cycle as desired.

BLENDING TIPS

Put liquids in the jar first, unless a recipe says otherwise.
Crushing Ice: Crush 6 ice cubes or approximately 2 cups of ice at a time.
Do not remove the lid while in use. Remove filler cap to add smaller ingredients.
Hot Foods: Open the filler cap to vent steam. Tilt filler cap away from you. Keep hands away from the cover opening to prevent possible burns. When working with hot liquids, remove the filler cap and start blending at a low speed then move to a faster speed. Do not add liquid over the 4 cups (1 Liter) level.
Cut all firm fruits and vegetables, cooked meats, fish, and seafood into pieces no larger than 3/4 inch (1.8 cm) to 1 inch (2.5 cm). Cut all kinds of cheeses into pieces no larger than 3/4 inch (1.8 cm).
REVERSE/ PULSE function should be used to help dislodge and mix foods. No cutting or chopping occurs while using this function.

The maximum rating as marked on the unit is based on the attachment that draws the greatest load. Other recommended attachments may draw significantly less power.

CARING FOR AND MAINTAINING YOUR OSTER® BLENDER

AFTER USE:

Lift the jar straight up from the base, remove the lid and empty the jar.
If necessary, use a rubber spatula to scrape foods away from the sides of the jar.

IMPORTANT: UNPLUG BEFORE CLEANING.

CLEANING

The blade is sharp! Gently remove it.Release the blade from the bottom of the jar by turning the jar bottom cover counterclockwise.The jar lid, jar lid feeder cap, and blade are dishwasher safe. Wash them on the top rack of the dishwasher. Place sealing ring into a bottom basket of the dishwasher. You can also wash the parts in warm, soapy water. Rinse well and dry. Wipe the base with a soft, damp cloth to clean. Never submerge the motor base in any liquid. Check the parts as you put them back together.IMPORTANT: DO NOT IMMERSE THE BLENDER BASE IN WATER OR ANY OTHER LIQUIDS.

EASY CLEANPour 3 cups of warm water into the blender jar. Add 1 – 2 drops of liquid dishwashing detergent. Blend detergent for 10 –15 seconds. Empty jar of soapy water into the sink. Rinse the jar thoroughly with clean water.NOTE: Easy Clean is not a substitute for the regular cleaning described above. It is especially important to disassemble and thoroughly clean your blender when processing milk, dairy products, meats, seafood, and eggs.

STORING

Reassemble the blender for storage. Leave the lid open a gap so no odors are retained. WARNING: Never put the jar, or any other parts, in a microwave oven. Never store foods or drinks in the jar.The following information is intended for Mexico only.

Printed in MexicoP.N. 2143741GCDS-OST1365377-JC

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-31

Oster

admin

Tags:

Blender, BLSTSE75, Classic Blender, Limited Edition, Limited Edition Blender, Oster