GEO V OVEL 412 Installation Manual

GEO V OVEL 412

INSTALLATION MANUAL

Measures: inch [millimeter]

PART LIST

SUPPLIED HARDWARE LIST

TOOLS REQUIRED (not supplied)

SAFETY INFORMATION

CAUTION

Read carefully the following before starting the installation:

  • Before starting the installation of this fixture or the removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
  • If you have any doubts or questions about the installation of this fixture, consult a qualified electrician.
  • Carefully unpack this fixture, handle with care and place on a soft surface to prevent scratching.
  • Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

INSTALLATION

  1. Connect the lamp’s neutral (N) and live (L) wires to your own, using the twist-cap connectors (AA). Fix the lamp’s grounding wire to the mounting plate (A) by wrapping it around the bolt (BB), and then tightening the bolt. Connect the lamp’s grounding wire to your main grounding wire with a twist-cap connector (AA). Safely stuff the wires inside your outlet box.
  2. Install the mounting plate (A) onto your outlet box with the bolts (CC).
  3. Install the canopy (B) onto the mounting plate (A). Strongly tighten the nut.

CONSUMER RESPONSIBILITIES

The DISTRIBUTOR’s products will remain beautiful for many years if you properly care for them.

The DISTRIBUTOR does not recommend the use of harsh abrasive cleansers on any of its products. Harsh cleansers will damage the finish of your product. This warranty applies only to the original purchaser and

MAINTENANCE

  • For daily maintenance, use a dry cloth.
  • Never use abrasive cleaners or strong bleach, scrapers, metallic brushes, or other objects or any products which can graze or tarnish surfaces.

GEO V OVEL 412 Installation Manual – GEO V OVEL 412 Installation Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by

Tags: