Oxygenics 010147810776 Easy Slide Bar with Force Combo Installation Guide

Table of Contents

Oxygenics 010147810776 Easy Slide Bar with Force Combo Installation Instructions

EASY INSTALLATION INSTRUCTIONS

STEP 1To remove your existing shower head turn the existing shower head in a counterclockwise direction.

STEP 2Remove any remnants of old plumber’s tape and flush out shower pipe for 5 to 10 seconds. Wrap plumber’s tape clockwise 3 or 4 turns around threaded end of shower arm.

STEP 3Thoroughly clean area where Easy Slide Bar will be applied.

STEP 4Carefully remove covering from adhesive strips. Use caution as adhesive is extremely powerful.

STEP 5Place Easy Slide Bar in desired location within shower. Press and hold firmly in place for 30 seconds.

STEP 6Screw the diverter clockwise onto the taped portion of the shower arm. Wrap plumber’s tape 3 turns around threaded ends of the diverter.

STEP 7In a clockwise direction, screw fixed unit onto the taped portion of the diverter and hand tighten.

STEP 8Attach grooved end of hose to diverter and hand tighten. Attach smooth end of hose to base of handheld shower and hand tighten.

STEP 9Insert your new handheld shower into holder. Press and hold button on shower bar carriage and slide carriage to desired height. Release button to lock in position.

WARNING: ADHESIVE IS EXTREMELY STRONG AND WILL STICK ON CONTACT.

Oxygenics is not responsible for any injury or damage resulting from improper installation, use, or removal of Easy Slide Bar.

EASY TWIST SPRAY SELECTION

Enjoying multiple spray patterns during your shower has never been easier. With the Force’s easy twist design, simply rotate the easy spray selector for a quick spray change.

USING THE DIVERTER

To change the shower spray: Place your index finger on one lever and your thumb on the other lever and rotate either clockwise or counter clockwise (depending on the current position) until you feel it click into place.