Oxygenics 010147893885 Body Bar Chrome 3-Spray Shower Bar System
EASY INSTALLATION INSTRUCTIONS
STEP 1: Remove your existing shower head. To remove, turn the existing shower head in a counterclockwise direction.
STEP 2: Remove any remnants of old plumber’s tape and flush out shower pipe for 5 to 10 seconds. Wrap plumber’s tape clockwise 3 or 4 turns around threaded end of shower arm.
STEP 3: Screw the diverter clockwise onto the taped portion of the shower arm. Wrap plumber’s tape 3 turns around threaded ends of the diverter.
STEP 4: In a clockwise direction, screw PowerSelect onto the taped portion of the diverter and hand tighten.
STEP 5: Clean area BodyBar will be applied. Remove covering from adhesive strips – adhesive is extremely powerful. Place BodyBar in desired location within shower. Press and hold firmly in place for 30 seconds.
STEP 6: Attach hex nut end of hose to diverter and hand tighten. Attach conical nut end of hose to BodyBar and tighten.
ATTENTION: WASHERS PRE-INSTALLED IN HOSE ENDSWashers must be inserted into both hose ends for proper installation.
EASY TWIST SPRAY SELECTION
Enjoying multiple spray patterns during your shower has never been easier. With the PowerSelect’s easy twist design, simply rotate the easy spray selector for a quick spray change.
USING THE DIVERTER
To change the shower spray: Place your index finger on one lever and your thumb on the other lever and rotate either clockwise or counter clockwise (depending on the current position) until you feel it click into place.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.If you need installation assistance, replacement parts or have questions regarding our warranty, our Customer Service team can be contacted by:PHONE:1-866-440-9257 or 775-420-5600LIVE CHAT:www.oxygenics.comEMAIL: [email protected]ONLINE: www.oxygenics.com/claimsBusiness hours:Monday – Thursday 7:00 am to 5:00 pm PST Friday 7:00 am to 4:30 pm PST**Closed on all nationally observed holidays
References
[xyz-ips snippet=”download-snippet”]