ozito PXCBLSS-018 Cordless Split Tube Blower Instruction Manual

Table of Contents

PXCBLSS-018 Cordless Split Tube Blower

CORDLESS SPLIT TUBE BLOWER

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: No Load Speed: Max. Air Speed: Max. Air Volume: Weight:

18V 12,000/min 210km/hr 105m3/h 1.93kg

ozito.com.au

STANDARD EQUIPMENTCordless Blower Split Blower Tube Blower Tube Extension

PXCBLSS-018

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:Australia 1800 069 486 New Zealand 0508 069 486TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.5 YEAR REPLACEMENT WARRANTYYour Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Lithium Ion batteries and chargers are covered by a 36 month warranty. Warranty excludes consumable parts, for example: blower tubes.

WARNINGThe following actions will result in the warranty being void.· If the tool has been operated on a supply voltage other than that specified on the tool.· If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.· Failure to perform maintenance as set out within the instruction manual.· If the tool is disassembled or tampered with in any way.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0519

KNOW YOUR PRODUCT

CORDLESS SPLIT TUBE BLOWER

1. Blower Tube Extension 2. Split Blower Tube 3. Blower Tube Lock Tab

4. On/Off Switch 5. Sure Grip Handle

123

SETUP & PREPARATION1. ASSEMBLYWARNING! ENSURE THE TOOL IS SWITCHED OFF AND BATTERY DISCONNECTED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.Fitting the Blower Tubes1. Align the split blower tube with the outlet of the blower.

2. Push the split blower

tube onto the blower

until it clicks into place.

BATTERY & CHARGERThis tool is compatible with all battery and chargers from the Ozito Power X Change Range.

3. Align the blower tube extension with the end of the split blower tube and slide into place.4. To lock into place, rotate extension in clockwise direction until extension clicks into place.

ONLINE MANUALScan this QR Code with your mobile device to take you to the online manual.

5. To remove blower tube extension, rotate in anti-clockwise direction.

OPERATION

2. INSERTING & REMOVING THE BATTERY Inserting the Battery Pack1. Align the ribs of the battery with the recess in below the handle.2. Slide the battery in so that it clicks into place.

3. CONTROLSWARNING!: DO NOT USE THE BLOWER WITH ANY TYPE OF ACCESSORY OR ATTACHMENT. SUCH USAGE MIGHT BE HAZARDOUS.Switching On and Off1. To start the blower squeeze the on/off switch.2. To stop the blower release the on/off switch.

Removing a Battery from the Blower1. Press and hold the battery release tab to release the battery.

WARNING!: DO NOT PUT PART OF YOUR BODY SUCH AS HANDS AND FINGERS NEAR THE INLET OR OUTLET OPENING.

2. Slide the battery out.

WARNING! DO NOT USE ANY ATTACHMENTS OR ACCESSORIES NOT RECOMMENDED BY THE MANUFACTURER OF THIS PRODUCT, AS IT CAN RESULT IN SERIOUS PERSONAL INJURY.

4. OPERATIONWARNING!: DO NOT SWITCH THE BLOWER ON IN ENCLOSED OR POORLY VENTILATED SPACES OR IN THE PRESENCE OF FLAMMABLE AND/OR EXPLOSIVE LIQUIDS, GASES AND POWDERS.BlowingThe blower is ideal for blowing leaves, grass clippings and other debris. The split tube allows for easy cleaning of outdoor furniture while the full-length tube makes easy work on paths and driveways. Hold the blower firmly, squeeze the on/off switch, point the jet of air in front of you and move forward slowly. Move the blower from side to side, with the tube several inches above the ground. Be careful where you point the jet of air as it can move heavy material and cause injury or damage to bystanders. Note: Be aware of other people and animals in the area where you are to be operating the blower. Note: Avoid collisions with hard objects which could damage your machine.PXCBLSS-018

BATTERY PROTECTION SYSTEM

BATTERY AND CHARGER SAFETY WARNINGS

The tool is equipped with the battery protection system, which helps to ensure a long service life. The output power automatically cuts off during operation when the tool and/or battery are placed under the following situations: · When the tool is overloaded:If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart. · When the remaining battery capacity becomes low: Recharge the battery pack. Note: The battery protection system does not in any way damage the tool. Note: The indicated capacity may be lower than the actual level during use or immediatelyafter using the tool.MAINTENANCEWARNING! ALWAYS ENSURE THE TOOL HAS COMPLETELY STOPPED AND THE BATTERY IS REMOVED PRIOR TO ANY MAINTENANCE.· Keep air intake clean and air vents free of debris to avoid overheating the motor.· Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.· If the blower vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates a mechanical problem continued operation could lead to injury or damage.· No lubrication is necessary as the motor is equipped with lifetime-lubricated bearings.

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOURBATTERY CHARGER.1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack.2. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution.3. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat. Place the charger in a position away from any heat source.4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.6. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution.7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it checked by an electrician or power tool repairer.8. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.10. Never attempt to connect 2 chargers together. 11. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as insidesheds or metal buildings in summer). 12. The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on anyother voltage! 13. The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the chargingnotes and procedures. 14. The longest life and best performance can be obtained if the battery pack is charged when the air temperature isbetween 18 – 24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important and will prevent damage to the battery pack. 15. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a fire. 16. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immediately discontinue use and do not recharge. 17. During charging, the battery must be placed in a well ventilated area.

Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the blower by an unauthorised person or by mishandling of the blower. This tool is designed for DIY use – use in commercial or industrial environments will void the warranty.

DESCRIPTION OF SYMBOLS

TROUBLESHOOTING

Problem Cause Blower is not Possible clogging startingBattery is low in charge

Remedy Clean the blower tube and blower outlet ofany leaves or debris. Charge battery

Blower is not operating at full capacity

Battery not inserted properlyPossible clogging

Insert battery pack correctlyClean the blower tube and blower outlet of any leaves or debris.

Motor stops Battery has no power while blowing

Charge battery

SPARE PARTSSpare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486 E-mail:

Read instruction manual Regulator compliance mark

Wear eye and ear protection.

Do not use in the rain or leave the blower outdoors while raining.

Keep bystanders away. Do not operate whilst people especially children or pets are in the area.

CARING FOR THE ENVIRONMENTPower tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.

ELECTRICAL SAFETY

WARNING! When using mains-powered tools, basic safety precautions, includingthe following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference. The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.This tools charger is double insulated in therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not useany adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a powertool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correctpower tool will do the job better and safer at the rate for which it was designed.b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.5. Battery tool use and care a. Recharge only with the charger specified by the manufacturer. A charger that is suitable for onetype of battery pack may create a risk of fire when used with another battery pack. b. Use power tools only with specifically designated battery packs. Use of any other battery packs maycreate a risk of injury and fire. c. When battery pack is not in use, keep it away from other metal objects, like paper clips,coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

BLOWER SAFETY WARNINGS

· Always wear adequate protective clothing when operating the blower to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear defenders.· Do not start the tool when it is upside down or when it is not in the operating position.· Switch the motor off and remove the battery when the tool is not being used, left unattended, being cleaned or being moved from one place to another.· Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the tool.· Never direct the blower direction nozzle towards bystanders or pets. Never blow debris in the direction of bystanders or pets. The operator is responsible for accidents or hazards occurring to other people or their property.· Do not handle the battery or the tool with wet hands and do not use the tool in the rain.· Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a reduction in air flow.· Keep a balanced and stable stance while using the tool. Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders.· Do not get distracted and always concentrate on what you are doing. Use common sense. Never operate the tool when you are tired, sick or under the influence of alcohol or other drugs.

· Ensure the blower tubes are not restricted or obstructed during use.· Do not operate this appliance with long loose hair or loose fitting jewellery. Tie long loose hair back and remove loose fitting jewellery.· Only operate the tool during broad daylight or with adequate artificial light.· When the tool is not in use, store it in a dry place and out of reach of children.· Only use the tool according to the instructions given in this manual.· Check regularly that the screws are tight.WARNING! When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician.WARNING! This appliance is not intended for use by young or infirm persons unless supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.

1.5Ah BATTERYINSTRUCTION MANUAL

SPECIFICATIONS

Input: Battery Capacity: Power Consumption: Weight:

18V 1.5Ah Li-ion 27Wh 0.35kg

ozito.com.au

BATTERY SAFETY WARNINGSTHIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY.1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack.2. This charger is not intended for any uses other than charging Ozito Power X Change rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution.3. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat. Place the charger in a position away from any heat source.4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.6. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution.7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it checked by an electrician or power tool repairer.8. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.10. Never attempt to connect 2 chargers together. 11. The charger is designed to operate on standard household electrical power (240 volts). Do notattempt to use it on any other voltage! 12. The battery pack is not fully charged out of the carton. First read the safety instructions and thenfollow the charging notes and procedures. 13. DO NOT STORE OR USE the battery pack in locations where the temperature may reach below 0ºCor exceed 50ºC (such as inside sheds or metal buildings in summer). This is important and will prevent damage to the battery pack. 14. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a fire. 15. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immediately discontinue use and do not recharge. 16. During charging, the battery must be placed in a well ventilated area.

1. Battery 2. Battery Release Button 3. Charge Indicator Button

12 3

PXBP-150

DESCRIPTION OF SYMBOLS

V Volts ac/~ Alternating Current dc Direct Current mA MilliamperesLithium Ion BatteryRecycle BatteryDo not incinerateRegulatory Compliance Mark (RCM)

Hz Hertz W Watts Ah Amp HourWarning Do not store or use battery in temperatures exceeding 50°C

Do not put in the rubbish

Do not get battery wet

Do not store battery when the charge

40-60%

is low; store between 40-60%.

ELECTRICAL SAFETYWARNING! When using mains-powered tools, basic safety precautions, including the following,should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.This tools charger is double insulated therefore no earth wire is required.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. To reduce the risk of electric shock, we recommend the use of a residual current device (rated 30mA or less). This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. OPERATIONOnly use the battery pack with Ozito Power X Change 18V cordless products.CHARGING YOUR LITHIUM ION BATTERY This battery has been shipped in a low charge condition, and requires charging prior to use. Allow several cycles of charging and discharging (through use with a compatible tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range available through your local Bunnings Warehouse; product availability may differ.1. Insert the power plug of the charger into the mains socket outlet. The green LED will begin to flash when properly connected to power supply.2. Insert the battery pack into the battery charger . 3. Remove battery from the charger once fully charged. Disconnect the charger fromthe power supply. Note: The battery pack can become a little warm during the charging. This is normal. If the battery pack fails to charge, check:if there is voltage at the socket outlet that the battery and charger are properly connected. If the battery pack still fails to charge, please contact our customer service center.BATTERY CHARGE INDICATOR The purchased battery is equipped with a battery charge indicator to show the state of the battery charge. Press the charge indicator button and look to see which LED lights.Battery requires immediate chargingLow state of charge, requires charging soon.Mid state of chargeFull state of charge.Note: The battery needs to be removed from the tool to check the state of charge.BATTERY PROTECTION SYSTEM The tool is equipped with a battery protection system, which helps to ensure longevity of the battery. The output power automatically cuts off during operation when the tool and/or battery are placed under the following situations: · When the tool is overloaded:If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart. · When the remaining battery capacity becomes low: Recharge the battery pack. Note: The battery protection system does not in any way damage the tool. Note: The indicated capacity may be lower than the actual level during use orimmediately after using the tool.

WARRANTYIN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 069 486 New Zealand 0508 069 486TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.36 MONTH REPLACEMENT WARRANTYYour product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts.WARNINGThe following actions will result in the warranty being void. · If the tool has been operated on a supply voltage other than that specified on thetool. · If the tool shows signs of damage or defects caused by or resulting from abuse,accidents or alterations. · Failure to perform maintenance as set out within the instruction manual. · If the tool is disassembled or tampered with in any way.0219ONLINE MANUALScan this QR Code with your mobile device to take you to the online manual.OZITO Australia/New Zealand (Head Office)1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

PXBP-150

COMPACT CHARGER

INSTRUCTION MANUAL

SPECIFICATIONS

Input: Output: Battery Charge Time:

110-240V ~AC 50-60Hz 21V DC, 800mA 2.0hrs – PXBP-150 (18V 1.5Ah) 2.5hrs – PXBP-200 (18V 2.0Ah) 3.1hrs – PXBP-250 (18V 2.5Ah) 4.0hrs – PXBP-300 (18V 3.0Ah) 5.0hrs – PXBP-400 (18V 4.0Ah) 6.5hrs – PXBP-520 (18V 5.2Ah) 6.5hrs – PXUBP-520 (18V 5.2Ah Ultra)

ozito.com.au

1. Charging Cradle 2. Charging Adaptor

PXCG-120

DESCRIPTION OF SYMBOLS

V Volts A AmperesRead Instruction ManualIndoor Use Only>40°C Do not charge battery in temperatures exceeding 40°C

Hz Hertz Ah Amp HourDouble InsulatedDo not dispose of in rubbishRegulatory Compliance Mark (RCM)

BATTERY & CHARGER SAFETY WARNINGSBefore using the charger or battery read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack. Do not lose these safety instructions.Battery Warnings 1. The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the chargingnotes and procedures. 2. For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently. 3. Use and store the battery pack in dry conditions with low humidity between 0-50°C, ideally at 15°C. Avoid exposingbattery pack and charger to direct sunlight. 4. Do not keep battery pack in places where temperatures are liable to reach over 50°C, such as in a car, metal shed orsimilar that is in direct sunlight. 5. Do not ignite the battery pack or expose it to fire. There is a risk of explosion! 6. Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells. The most commoncause of exhaustive discharge is long-term storage and continued use of low-charge batteries. Always store the battery with some charge. Charge the batteries every 2-3 months to restore charge. Stop working as soon as the performance of the battery falls noticeably or the electronic protection system triggers. 7. Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing without this overheating being apparent externally. 8. Avoid damage and shocks. Do not use batteries which have been dropped from a height of more than one meter or strong external impact, even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage. 9. If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the equipment. Do not press the ON/OFF switch on the tool if the protective cut-off has actuated. This may damage the battery pack. Allow the battery to cool to room temperature before use. 10. Use only original battery packs. The use of other batteries may result in injuries, explosion and a fire risk. 11. Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can cause dangerous cell damage. Never charge or use batteries which have been exposed to moisture, rain or high humidity. 12. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack is damaged, do not use the battery. 13. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 14. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs, flush with water and seek medical help immediately. Liquid ejected from the battery may cause irritation or burns. 15. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. 16. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. 17. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer. 18. 18. Do not disassemble Battery. This may result in a risk of electric shock, electrocution or fire.Charger Warnings 19. Please check the data marked on the rating plate of the battery charger. Ensure to only connect the battery chargerto a power supply with the voltage marked on the rating plate. 20. Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired by anauthorised service agent before use. 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Changerechargeable batteries with an Ozito Power X Change Charger. 24. The battery pack may become warm during use. Allow the battery pack to cool to room temperature beforecommencing with the charging. 25. Do not over-charge batteries. Do not exceed the maximum charging times. These charging times only apply todischarged batteries. Frequent insertion of a charged or partly charged battery pack will result in over-charging and cell damage. Do not leave fully charged batteries in the charger. 26. Charge the battery pack in dry conditions with low humidity between 10-40°C. Avoid exposing battery pack and charger to direct sunlight. 27. Do not use batteries which have suffered deformation during the charging process or shows any other signs of abnormalities including, excessive curvature of the housing, gassing, hissing or cracking. 28. Never fully discharge the battery pack. A complete discharge of the battery pack will lead to premature ageing of the battery cells. 29. Never charge the batteries unsupervised. 30. Do not cover or place any object on top of the charger, place the charger away from heat sources. 31. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger. 32. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. 33. An extension cord should not be used unless necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution. 34. Do not disassemble charger. This may result in a risk of electric shock, electrocution or fire. 35. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk. 36. Do not use the cordless tool or the battery charger near vapours and inflammable liquids.ELECTRICAL SAFETYWARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference.Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. To reduce the risk of electric shock, we recommend the use of a residual current device (rated 30mA or less).This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. CHARGING A BATTERYCAUTION: THE CHARGER SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS).1. Connect the charger into a mains power outlet. 2. The charger LED will flash greenshowing power is being supplied to the charger.3. With the battery sitting on a flat surface, align the raised ribs on the battery with the recess in the charger and slide onto the battery ensuring a firm connection.4. The charger LED will illuminate red signifying that the battery is charging.Note: The battery will not develop a memory, it does not have to be fully discharged before recharging 5. When removing the chargerfrom the battery, first press the battery release tab, then slide the charger from its position.

Charger LED Indicator

LED Indicator

Situation

GREEN (Flashing)

Stand By (no battery pack is inserted)

RED (Illuminated)

Battery is charging (low charge)

GREEN (Illuminated)

Battery is fully charged

RED (Flashing)

Battery or Charger fault

RED & GREEN (Flashing)

Battery pack is too hot or too cold (remove battery from charger and store at room temperature 20ºC. Insert battery again when at correct charging temperature). If this happens again, the battery is defective and needs to be replaced.

WARRANTYIN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:Australia 1800 069 486New Zealand 0508 069 486TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.36 MONTH REPLACEMENT WARRANTYYour product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts.WARNINGThe following actions will result in the warranty being void. · If the tool has been operated on a supply voltage other than that specifiedon the tool. · If the tool shows signs of damage or defects caused by or resulting fromabuse, accidents or alterations. · Failure to perform maintenance as set out within the instruction manual. · If the tool is disassembled or tampered with in any way.0320

2. MAINTENANCE· Disconnect the charger from power source before cleaning. · Keep the charger in a dry place out of reach of children. · If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, softcloth only to wipe down the surface. Never let any liquid get inside the charger; never immerse any part of the charger. · There are no other parts inside the charger which require maintenance.Do not take the charger apart. If the charger is damaged, contact your supplier or the manufacturer.

report this ad

ONLINE MANUALScan this QR Code with your mobile device to take you to the online manual.OZITO Australia/New Zealand (Head Office)1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.PXCG-120

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-31

ozito

admin

Tags:

_pdf, Cordless Split Tube Blower, ozito, PXCBLSS-018