ozone Mouse Argon Ocelote World User Manual

ozone Mouse Argon Ocelote World

System Requirements

Operation System Windows XP / Windows Vista / Windows 7 / Windows 8 / Windows 8.1
Free USB 1.1/ 2.0 port
CD-ROM drive
50 MB free hard disk space

Installation Instructions

Plug USB connector of ARGON OCELOTE to a USB port of your PC
Insert the enclosed driver CD into your CD-ROM drive (or download the driver from www.ozonegaming.com )
Double click “Setup.exe” to start the installation program. Click “Next” to continue
Select the folder to save the driver and click “Next” to continue
Installation run automatically; click “Finish” to complete the installation

DEFAULT BUTTON ASSIGNMENT

Click
Menu
Wheel Click
IE Forward
IE Backward
CPI Up
CPI Down
Scroll Down
Scroll Up

BUTTONS LAYOUT

Left/Right Hand User Swap

Via Software; search for BUTTON SETTINGS and choose from Hand Selection

(install the driver to assign different functions to each button)

BUTTON Settings

ARGON OCELOTE DRIVER

Advanced Settings

Polling Rate Setting
On-To-Go Speed Setting, Speed of repeat mouse function (refer to 2.6 Mouse Function)
Reset to Factory Default: In the pop-up window, click “OK” to APPLY the change

BUTTON Settings

MACRO MANAGER

Macro is a series of desired keystrokes which can be recorded and assigned to the keyboard. In other words, it’s a series of key press and releases, in which every pressed keystrokes, released keystrokes, and delays are been recorded. The delay is the duration between the keys “press and release” or “release and press”, that is automatically recorded and output once the macro is assigned.

Create and Assign a Macro

Select a button and click ”Macro Manager” from the menu
In the pop-up window, click “NEW” and enter a name for the macro, then start to create the macro
Select the options of “Record Delays” and set the “Loop Times” from the right column if needed
Click ”Start Record” type the desired key combination and click “Stop Record” when you are finished. If needed “Right Click” on one of the keys in the sequence to edit it. Click “OK” to continue
Assign a created “Macro” to a “Button” and click “APPLY” to complete the setting

Multimedia

Select a button and click ”Multimedia” from the menu
Select the desired function in the sub-menu and click “APPLY” to confirm the setting

Profile Switching

Select a button and click ”Profile” from the menu
Select the desired function in the sub-menu and click “APPLY” to confirm the setting. Profile Cycle: Cycle Switching / Profile Up: Profile + / Profile Down: Profile –

CPI/DPI Switching

Select a button and click ”CPI Switch” from the menu
Select the desired function in the sub-menu and click “APPLY” to confirm the setting. CPI Cycle: Cycle Switching / CPI Up: DPI level + / CPI Down: DPI level –

Windows Management

Select a button and click ”Windows” from the menu
Select the desired function in the sub-menu and click “APPLY” to confirm the setting

Mouse Functions

Select a button and click the desired mouse function in the menu:“Click”, “Menu”, “Wheel Click”, “Double-click”, “IE Forward”, “IE Backward”, “Scroll Up”, “Scroll Down”, “Tilt Left”, “Tilt Right”, “Fire Button”, “On-To-Go (This is a combination button used to get a continuous mouse function: Hold down this button together with any other button with an assigned mouse function to get a continuous repeated mouse function)”.
Then, click “APPLY” to confirm the setting

Assign a Shortcut

Single mouse click to activate a combination of keys which used often

Select a button and click “Assign a Shortcut” from the menu
Select and enter the desired combination of keys from the pop-up window and click “OK” to continue
Click “APPLY” to complete the setting.Ex. now the “Ctrl” + “V” will be executed

Button Off: Disable the button function

Select a button and click ”Button Off” from the menu
Then, click “APPLY” to confirm the setting

Assign a Launch

Single mouse click to launch your chosen PC software

Select a button and click “Assign a Launch” from the menu
In the pop-up window, select the desired software from the folder and click “OK” to continue
Click “APPLY” to complete the setting

Windows Key

Select a button and click ”Windows Key” from the menu
Then, click “APPLY” to confirm the setting

OPEN DRIVER

Select a button and click ”Open Driver” from the menu for quick access to the Mouse Configuration Driver
Then, click “APPLY” to confirm the setting

Profile Setting

Each configuration profile corresponds to a personalized mouse setting. Therefore, this powerful feature allows you to create specific configuration profiles for each game.The defined configuration profile can be saved on your PC (we strongly suggest that you name the configuration file according to the name of the related game). The driver provides 5 profiles: Profile 1 to Profile 5.The default path of the saved configurations is in the “Config” folder under the “Driver Installation Directory”, in which you can find the 5 corresponding files for the 5 profiles on the main skin.On the right hand side of the Profile buttons you will find the following options: “Create Profile”, “Load Profile”, “Save Profile”, and “Edit Profile” used to set up your personalized configurations.You can create a variety of configurations and save them for future use. Even if you change to a different computer, you don’t have to repeat the process because you can easily import your previously saved configurations.

Create Profile

Click “Create Profile” to create a personalized PROFILE NAME and PATH to EXECUTE the GAME (setup the Game which will be connected to the profile, then when you execute the Game the driver will select the correct Profile for that specific Game)
Click “OK” to confirm the changes
Click “APPLY” to APPLY the changes

Load Profile

Click “Load Profile” to execute a previous setting of a certain profile
Select the profile to be imported and click “Open” in the pop-up window
Click “APPLY” to apply the changes

SAVE Profile

Select the profile that you want to save and click “Save Profile”
In the pop-up window, give a personalized name to the profile and click “Save”
Click “APPLY” to apply the changes

Edit Profile

Click “Edit Profile” to modify your personalized PROFILE NAME and EXECUTABLE GAME PATH
Click “OK” to confirm the changes
Click “APPLY” to apply the changes

Sensitivity Setting

Horizontal X and vertical Y – direction moving speed settings
Click on “XY synchronous working” for a synchronous direction moving option
DPI Settings: Click on “Orange Circle” for DPI lock / Set your personalized DPI using the sliding Bar
Click “APPLY” to confirm the settings