Bluetooth Conference SpeakerUser Manual
Manufacture: Foneric Electronics Co. Ltd.
Product Overview
Product Specification
| Mode | Bluetooth Conference Speaker |
| SNR | 95dB |
| Speaker Frequency response | Talk Mode: 100 – 7500Hz |
| Power Supply | 1A |
| Temperature | 0 C —45 C |
| Bluetooth Version | 5.0 |
| Microphone Frequency response | 100 – 7500Hz |
| Speaker Frequency response | Music Mode: 100 – 20000Hz |
| Transmit Range | 10m |
| Humidity | ≤90% |
| Battery Capacity: 1300mAh | |
| Product Dimension: φ141*40mm | |
| USB-A for Charge or Connect to the Computer |
How to connect
Connect to Laptop/PC (USB cable)
- Laptop Plug the PALOVUE iConf into a USB port on your PC. You may need to set the PALOVUE icon as the default playback device in your operating system’s audio settings.
- Desktop PC If the host of the computer you are using has USB ports on the front and back, Please Note: we suggested you turn on the power button first and then insert the icon USB into the port on the back of the computer.
Note:lf it cannot be used normally when connecting to the computer with USB for the first time, please plug and unplug the USB again.
Connect to smartphone
Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone. The Bluetooth range is 10m. To disconnect or reconnect, hold the Bluetooth button for 2 seconds to disconnect, short press the Bluetooth button once to reconnect.Note: In pairing mode, it will automatically shut down if it is not paired with any phone within 10 minutes.
Applicable Scene
In-Office
Online Leaming
At Home
Moving Office
How to charge
USB charging
Plug the PALOVUE iConf into a USB power source using the attached USB cable. The PALOVUE iConf battery lasts for up to 15 hours of talk time and takes approx. 3 hours to fully charge.
Automatic power-off
To preserve the battery while unplugged, the PALOVUE icon will automatically power off when it has not been connected to a Bluetooth device for 10 minutes.
Check the Battery
To view the current battery status, press the Battery status button. The LEDs around the edge of the PALOVUE icon will light up to indicate the current battery status.
| Charging in power-off state | Green LED indicator |
| Fully charged in power-dff state | Green LED indicator always on |
How to use
Typical use
In the power-on state, press the power button to play music, and press it again to pause the playback.
| WHAT | HOW | |
 |
Power on or off | Hold (3 sec) the Power button |
 |
Answer call | Press the Answer call button |
 |
End or reject the call | Press the End call button |
 |
Volume up/down | Press (or hold) the Volume Up or Volume down button |
 |
Mute/unmute microphone | Press the Mute button |
 |
Battery status | Press the Battery status button |
|
Connect Bluetooth device | Press the Bluetooth status button |
LED Status Indicator
| Status | Indication |
| Power on/off | Turns green |
| Volume display | Green |
| Answer call | Green |
| End call | Red |
| Incoming call when Bluetooth is connected | Answer call led and End call led light on |
| Skype for a business incoming call when USB is connected | Answer call led and End call led light on |
| Battery low display | Red |
| USB connection | Turns green |
| Charging in power-off state | Green LED indicator |
| Fully charged in power-off state | Green LED indicator |
| Mic Mute | Turns red |
| Bluetooth pairing button | Turns blue |
Factory reset
Long press the “Mute+V-” key combination and the pink indicator lights will all light up. This will clear all previous pairing information (RESET).
How to care for your PALOVUE iConf device
- The PALOVUE iConf is for indoor use only.
- Avoid storage at extreme temperatures (above 65°C/149°F or below -40°C/-40°F).
- Do not expose the PALOVUE iConf to rain or other liquids.
- Do not cover the PALOVUE iConf with stickers or labels.
- Please use a standard USB charger that meets the specifications to charge the device.
PACKAGE CONTENT
- Bluetooth Conference Speaker
- Portable outer box
- User Manual
Support
If you encounter any issues during operation, please simply scan below QR Code to ask for support. We will make things right for you within 48 hours.
report this adEmail: [email protected]Website: www.palovue.com
Note
Do not use the battery in an extremely hot environment such as in a car under direct sunlight or on a hot day. Otherwise, the battery will overheat and may catch fire (ignite), which will affect the performance of the battery and shorten the service life of the battery.If the electrolyte enters the eyes after the battery leaks, do not wipe it, rinse with water, and seek medical help immediately. If it is not handled in time, the eyes will be injured.The battery can only be used under the following conditions, otherwise, it will reduce the performance of the battery or shorten the service life of the battery. working environment:Charging: 0 C —45 CDischarge: -10 C —60 CStorage for 30 days: -20 C —45 CStorage for 180 days: -20 C —35 C
FCC Warning
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.– Increase the separation between the equipment and– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Note: If shielded cables or special accessories are required for compliance, a statement must be included which instructs the user to employ them, for example, Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired
[xyz-ips snippet=”download-snippet”]