panacom IP CAMERA B7-2MP User Manual

Table of Contents

panacom IP CAMERA B7-2MP User Manual

(speaker, power connector, reset button)

Please configure patiently for the first time of use Power on the device, wait for voice prompts,and proceed according to voice prompts.

when you hear“waiting for WiFi smart link configuration”,please use WiFi smart link to configure.
when you hear “access point established”,please use AP quick configuration to configure.

(the “reset” button is for reference only,actual position may vary depends on the actual product in your hand)

Tap”+“ and then tap ”Next“.
Wait until you hear“Access-Point established”or“Waiting for WiFi smart link configuration”now you can start connecting the camera to Wi-Fi.
If you hear the camera voice prompt “Access-Point established” choose method A or B to configure the camera.
If you hear the camera voice prompt “Waitingfor WiFi smartlink configuration”, choose method C to configure the camera.

Tap “Access-Point established”, MV+ID will be shown, tap it to proceed.
Choose your Wi-Fi network, enter the password, tap “Confirm”, and the camera will start connecting Wi-Fi.
Once you hear the camera voice prompt “WiFi connected”, it will be shown on device list.
The last step for setting up your camera is to set a password for the camera.

Terms and Conditions

Panacom warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
This warranty is limited to the repair and/or replacement of this product, according to our own criterion, free of charge within the stipulated term and it does not extend to consequential or incidental damages to other products that may be used with this unit.
The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of cut in connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
To make this warranty effective, you shall contact the Authorized Service Center of your country and they shall carry out the pertinent procedure. In order to start the necessary procedure to get said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name and product identification shall be stated clearly.
Transportation, freight, stay and/or insurance expenses, if any, are not covered by this warranty.

REPAIR SERVICETo ask for customer service please call 0810-888-7262.