Panasonic EH-KA11 Flexible Style Hair Styler Instruction Manual

Operating InstructionsHair StylerModel No.EH-KA11

Before operating this hair styler, please read these instructions completely and save this manual for future use.

Safety Instructions

Please read the safety instructions before using this hair styler. The safety instructions explained here are to help you use this hair styler safely and correctly, and also to prevent you from injuring yourself or others.WARNING: Not following the instructions below may cause fire, burns, explosion, short-circuiting or electric shock.Electrical ConditionsDo not immerse the appliance in water.Do not use the appliance near water.Do not use the appliance near bathtubs, showers, basins, or other vessels containing water.-Doing so may cause electric shock or fire.

This symbol with a prohibition sign in red on the appliance means “Do not use this appliance near water”.

1.  Always switch off the hair styler (“0” position) after use and before unplugging it from the power socket. Unplug it from the power socket when not in use. Always grasp the plug while unplugging. Failure to do so may lead to fire and/or an accident.
2.  Before connecting the hair styler, check that the voltage of the hair styler corresponds to the local voltage.
3. Do not cut, damage, or modify the cord. Do not pull, twist or bend the cord with unnecessary force. Do not place heavy objects on the cord or allow them to get pinched in between objects. Do not wrap the cord around the hair styler as it may cause fire and/or electric shock. If the cord is damaged or becomes hot, stop using it immediately.
4. When the hair styler is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair styler is switched off.
5. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

Using the Hair Styler

1. Stop using it immediately if the hair styler does not produce air constantly and the cord or plug is damaged or becomes hot, or the plug fits loosely in the outlet.
2. Never insert foreign objects into either the air inlet or outlet.
3. Do not use the hair styler near inflammable material such as benzene, paint thinner, sprays, etc.
4. Do not use the hair styler while your hands are wet.
5. Do not use or place the hair styler in an area with high humidity. Do not submerge the hair styler in water.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.

Repairing the Hair Styler

1. Do not attempt to repair, disassemble or modify the hair styler by yourself.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
3. If the cord or plug is damaged, stop using it immediately and contact an authorized Panasonic service center.

CAUTION

1. Do not put your hands on the air outlets or use them if they are damaged. You may get burned.
2. Only use the hair styler for drying and styling human hair. Do not use it for children.
3. Do not use the hair styler if it is damaged.
4. Do not touch the attachment as it becomes hot during and after use.
5. Make sure hair does not get sucked into the air inlets.
6. Do not use thinner, benzine, or any other solvent to clean the hair styler.
7. This hair styler is equipped with an automatic overheating protective device. If the hair styler overheats, it will generate cold air. Unplug it from the power socket. Allow it to cool down for a few minutes before using it again. Check that no fluff, hair, etc. is in the air inlets and outlets before switching it on again.

Parts Identification

1. Main Body
2. Attachment Release Button
3. Air Outlet
4.  Hang Ring
5. Air Inlet
6. Cord
7. Power Switch/Speed Selector0: Off1: Cool mode2: Set mode3: Dry mode

How to Use the Hair Styler

Fixing the Attachment

• Align the attachment with the hair styler as shown. Ensure that the groove of the attachment and the hook of the body are aligned with each other. Insert the hair styler in the attachment until it clicks.
• Press the attachment release button and pull out the attachment to remove it.

Introduction of the Attachment

Blow BrushUse it for a natural hairstyle.Take a small amount of hair and brush from the inside pulling it down gently. Use your free hand to support the motion.

Maintaining the Hair Styler

Clean the air inlets and outlets to prevent blockages that may cause overheating.The hair styler should be cleaned at least once a month.To clean the hair styler, turn the power switch to [0] and unplug the hair styler from the power outlet.

• Clean the air outlet using a brush as shown.
• To clean the air inlet, remove the filter by turning it in a counterclockwise direction and pulling the filter in your direction.
• Remove dust or hair by using a brush.
• To re-attach the filter, ensure that the groove of the connector and the projection of the filter are in line. Twist to fit

Specifications

Model No.: EH-KA11

*Only available in Taiwan.

report this ad

Panasonic Corporationhttp://www.panasonic.com© Panasonic Corporation 2009-20Printed in ThailandEH9210KA117 A0809-61020

References

• 
  Panasonic North America | Technologies that Move Us