Heavy Duty Hybrid Camera PM-81HYR
PM-81HYRHeavy Duty Hybrid Camera with AHD and TVL ResolutionUSER MANUALYOUR SAFETY COMES FIRSTTM
CONTENTS1.0 INTRODUCTION…………………………………………………………………..2 1.1 COMPONENT LIST ……………………………………………………..2 1.2 TECHNICAL SPECIFICATIONS:…………………………………….32.0 WIRING DIAGRAM ……………………………………………………………….3 3.0 TESTING……………………………………………………………………………..43.1 HOW TO TEST…………………………………………………………….4 4.0 TROUBLESHOOTING …………………………………………………………..4 5.0 CARE AND MAINTENANCE ………………………………………………….5 6.0 USING CONTROLLER TO CHANGE OUTPUT RESOLUTION…..56.1 “QUICK CHANGE” DEFAULT SETTINGS ……………………….5 6.2 MENU CHANGE INSTRUCTIONS …………………………………5 6.3 CHANGE THE DEFAULT MIRROR IMAGE TO REAL IMAGE(TO USE CAMERA AS FORWARD FACING OR USE WITH DVR)………………………………………………………………………….. 6 6.4 HYBRID CAMERA ………………………………………………………7 6.5 SETTING UP THE MENU ……………………………………………..9 6.6 LENS……………………………………………………………………….. 10 6.7 EXPOSURE ……………………………………………………………… 10 6.8 BACKLIGHT ……………………………………………………………… 13 6.9 WHITE BALANCE……………………………………………………… 15 6.10 BLACK AND WHITE IMAGE ……………………………………….. 16 6.11 NR (NOISE REDUCTION) ………………………………………….. 17 6.12 ADJUST ……………………………………………………………………22 6.13 EXIT …………………………………………………………………………24 7.0 CARE AND MAINTENANCE ………………………………………………..24 8.0 WARRANTY TERMS & CONDITIONS …………………………………..25 9.0 NOTES ………………………………………………………………………………301
1.0 INTRODUCTIONThank you for purchasing Parkmate’s PM-81HYR camera. We are certain that our product will give you trouble-free operation while providing you with safety features that enhance your driving experience.DISCLAIMEROur products are to assist and aid the driver, not to replace the manual function of the person operating the vehicle.Although the PM-81HYR is a visual aid and will allow you to view what is behind the vehicle, it does not remove the responsibility of driving the vehicle from the driver. Legal responsibility and safe driving practise remains with the driver at all times. You have purchased this product with the understanding that its use is as an aid only. We highly recommend that you have this product professionally installed to ensure that it will provide the functions it is set out to perform.CAUTION· Ensure you are using your rear camera within your countries’ road laws. Please make sure you are familiar with your local road legislation before use.1.1 COMPONENT LIST
PM-81HYR
10 Metre
Rear Camera Extension Cable
RCA Adaptor
Screws + Allen Key
Camera ProgammingModule
IMPORTANT NOTICE · Please read this manual carefully before using the product. · Wire connection points should always be insulated. · Wiring should always be installed away from heat sources andelectrical components.
2
· Please perform tests after finishing installation to ensure camera is working correctly.· This camera is intended for use as an aid when reversing your vehicle. Drivers must always use extreme caution when operating a vehicle.· Specifications are subject to change without notice.WARNING· Do not disassemble the camera or cut the camera cable as this voids the warranty. Disassembling the camera will compromise the waterproof seal.
1.2 TECHNICAL SPECIFICATIONS:
Signal System:
NTSC / PAL
Horizontal Resolution: 900 TVL / 960 AHD
Minimum Illumination: 0.0 Lux
Diagonal Angle:
150°
Waterproof Rating:
IP69K
Nominal Voltage:
12V / 24V
Working Temperature: -30°C to 85°C
2.0 WIRING DIAGRAM
12V + Front view option: PM-81HYR functions as a rear view camera as standard.3
To Monitor
PM-81HYR cable harness and programmer(Handheld Programmer)
12V +
CAM
LEFT BUTTONDOWN BUTTON
LEFT
UP RIGHTDOWN
Programming Module Image
TOP BUTTONRIGHT BUTTONMENU BUTTON
3.0 TESTING 3.1 HOW TO TEST1. Apply the parking brakes. (Safety Precaution) 2. Turn ignition on. (DO NOT TURN ON VEHICLE) 3. Shift into reverse gear. 4. Image should appear on the monitor. 4.0 TROUBLESHOOTING
PROBLEM“No Signal” appears while reversingVideo image is not sharp
SOLUTION1. Check video input connections2. Check camera power connectionsCheck camera lens for debris
4
5.0 CARE AND MAINTENANCEAlways keep camera clear from dirt and mud. Clean camera with a soft moist cloth.6.0 USING CONTROLLER TO CHANGE OUTPUT RESOLUTIONThe PM-81HYR camera has PAL and AHD settings by default. Default settings can be quickly changed by using the camera programming module (supplied).The camera programming module has to be connected with the camera connector as shown in above figure.NOTE : Please note AHD output will only work with AHD compatible monitors. CVBS output can work with both AHD and CVBS compatible monitors.6.1 “QUICK CHANGE” DEFAULT SETTINGS5. After the camera is connected with the programming module and the monitor please follow below steps.6. Press the Down button for 5 seconds, Camera output will switch to PAL from NTSC. Repeat the same step to revert to PAL.7. Press the LEFT key for 5 seconds, the output of camera will change from AHD to CVBS. Repeat the same step to revert to AHD.6.2 MENU CHANGE INSTRUCTIONS1. After the camera is connected with the programming module and the monitor please follow the below steps.TO CHANGE LANGUAGE (IF REQUIRED) : DEFAULT LANGUAGE IS ENGLISH.1. Press the OK key and the screen will change to the MAIN MENU.2. Using UP or DOWN key navigate to the item no 7, SPECIAL and press the OK key which will open up a new sub Menu page.3. Using UP and DOWN key go to menu option 5 and press the LEFT or RIGHT key to change to desired Language.5
4. Press DOWN key to reach menu option RETURN, Press OK key to return to MAIN MENU. Using UP and DOWN key reach to menu option SAVE & EXIT, press the OK key which will save the settings and will navigate out of the programming menu.6.3 CHANGE THE DEFAULT MIRROR IMAGE TO REAL IMAGE (TO USE CAMERA AS FORWARD FACING OR USE WITH DVR).1. Press the OK key to enter into MAIN MENU.2. Press UP and DOWN key to reach menu option 7, SPECIAL and press the OK key which will open sub menu page.3. Using UP and DOWN key select option 2, D-EFFECT. Press OK button to enter the sub menu.4. Pressing UP and DOWN key, select option 2 and press OK key which will open V- FLIP, using LEFT and RIGHT key, change the orientation of the image to REAL image.Test the image by pressing “Test” in camera view and you should be able to read text confirming REAL Image5. To change back to MIRROR image, follow the same above mentioned steps.
6.4
HYBRID CAMERA
OSD MENU TREE
MAINMENU
LENS EXPOSURE
DC
INDOOR / OUTDOOR MAX SHU
1/60(50) ~ 1/50000
IRIS SPEED
0 ~ 15
MANUAL
SHUTTER
AUTO, 1/30(25) ~ 1/50000, x2 ~ x30
AGC
0 ~ 15
SENS-UP
AUTO / OFF
BRIGHTNESS 1 ~ 100
x2 ~ x30
D-W DR
ON OFF AUTO
0 ~ 8
DEFOG
AUTO / OFF
POS / SIZE
GRADATION 0 ~ 2
DEFAULT
BACKLIGHT BLC
LEVEL AREA DEFAULT
HIGH, MIDDLE, LOW
HSBLC
SELECT
AREA1 ~ AREA4
DISPLAY
ON / OFF
BLACK MASK ON / OFF
LEVEL
0 ~ 100
MODE
ALL DAY
NIGHT
0 ~ 255
DEFAULT
OFF
WHITE BAL ATW
AW B
MANUAL
BLUE
0 ~ 100
RED
0 ~ 100
OUTDOOR
INDOOR
AWC SET
DAY&NIGHT AUTO
D N (CDS)
0 ~ 255
D N (DELAY) 0 ~ 60
N D (CDS)
0 ~ 255
N D (DELAY) 0 ~ 60
EXT
D N (DELAY) 0 ~ 60
N D (DELAY) 0 ~ 60
BW
BURST
ON / OFF
IR SMART
ON / OFF
LEVEL
0 ~ 15
AREA
COLOR
6
7
NR
2DNR
HIGH, MIDDLE, LOW, OFF
3DNR
HIGH, MIDDLE, LOW, OFF
SPECIAL
CAM TITLE D-EFFECT
ON / OFF FREEZE MIRROR
ON / OFF ROTATE / V-FLIP / MIRROR / OFF
NEG. IMAGE ON / OFF
MOTION
ON / OFF
SELECT
AREA1 ~ AREA4
DISPLAY
ON / OFF
PRIVACYLANGUAGE DEFECT
SENSITIVITY COLOR TRANS
0 ~ 100GREEN / RED / WHITE / BLUE0.25 / 0.50 / 0.75 / 1.00
ALARM
VIEW TYPE
OSD VIEW ALARM OUT. ALARM SIG. TIME
ALL / OUTLINE / BLOCK / OFF ON / OFF ON / OFF HIGH / LOW 0 ~ 15
DEFAULT
ON / OFF
SELECT DISPLAYCOLOR TRANS DEFAULT
AREA1 ~ AREA4 COLOR / INV. / MOSAIC / OFF CYAN / GREEN / YELLOW / BLUE / RED / BLACK / WHITE / USER0.25 / 0.50 / 0.75 / 1.00
ENG / ARB / HEB / JPN / KOR / TUR / NED / POR / RUS / POL / SPA / ITA / FRA / GER / CHN2 / CHN1
LIVE DPC
ON / OFF
AGC LEVEL 0 ~ 255
LEVEL
0 ~ 100
WHITE DPC ON / OFF
POS / SIZE START DPC VIEW LEVEL AGC SENS-UP
ON / OFF 0 ~ 60 0 ~ 14 X2 ~ X30
BLACK DPC ON / OFF
POS / SIZE
START
DPC VIEW LEVEL
ON / OFF 0 ~ 255
ADJUST
SHARPNESS AUTO / OFF LEVEL
0 ~ 10
START AGC 0 ~ 255
END AGC
0 ~ 255
MONITOR
LCD
GAMMA
0.45 ~ 1.00, USER
BLUE GAIN RED GAIN
0 ~ 100 0 ~ 100
CRT
BLUE GAIN
0 ~ 100
RED GAIN
0 ~ 100
EXIT
LSC
ON / OFF
VIDEO. OUT NTSC / PAL
OUT. MODE AHD / CVBS
SAVE&END
NOT SAVE
RESET
8
6.5 SETTING UP THE MENU
Settings can be changed using theOSD Programming Controller.
–
1. Press the menu button to access the SETUP mode. The
SETUP menu is displayed on the monitor.
2. Please select any function youwish to activate by using the
UP / DOWN buttons on the programming controller.
–
The cursor can be moved up or down by using the UP / DOWN
–
selections. Position the cursor to point to the function you wish
to operate.
–
–
MAIN MENU
SUB MENU
MAIN MENU
1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFF ATW AUTOSAVE&END
*Please see Programming Module Image on Page 4 for which buttons to press.
–
MAIN MENU: Use UP / DOWN button.
–
SUB MENU: Use LEFT / RIGHT button.
3. Change the status of the selected feature using the LEFT / RIGHT buttons. When the LEFT or RIGHT selection is done, –
available values and modes are displayed in order.
–
4. When completed, move the cursor indicator to EXIT position
and press the menu button to finish the setting.
NOTE: If Appears at the mode you wish to operate, it means
–
that there is a sub-menu which can be selected by OSD –
programming controller. –
–
–
–
–
9
6.6 LENS
—–
MAIN MENU
1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFFATW AUTOSAVE&END
1. MANUAL – When manual lens is used.
– ——–
2. DC – When DC IRIS lens is used
– MODE: INDOOR – Adjusts the MAX SHUTTER
–
OUTDOOR – Adjusts the MAX SHUTTER
You can (NTSC),
select the and 1/50
MAX SHUTTER from 1/60 to 1/50,000 sec (PAL).
to
1/50-,00-0
sec
DC LENS MODE
1. MODE 2. IRIS SPEED3. RETURN
INDOOR |||||||||||||||||||| 8 RET
–INDOOR MODE
1. MIN SHU 2. MAX SHU3. RETURN
1/30 FLK RET
–
– IRIS SPEED: Adjusts the IRIS SPEED 0 ~ 15.
–
– RETURN: Return to the MAIN MENU or SAVE & EX- IT.
6.7 EXPOSURE
–
MAIN MENU
1. LENS 2. EXPOSURE3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFF ATW AUTOSAVE&END
EXPOSURE
–
1. SHUTTER
AUTO
2. AGC
||||||||||||||||||||15
3. SENS-UP 4. BRIGHTNESS
– AUTO|||||||||||||||||||| 40
5. D-WDR
OFF
6. DEFOG
OFF
7. RETURN
RET
1. SHUTTER:
– DC: When lens mode is on DC, shutter will be deact-ivated.
MANUAL
– A. AUTO: The shutter speed is controlled automatically.
10
–
––
– B. FLK: Please select FLK mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. – C. FIXED: The shutter speed is controlled manually.-You can select the speed from 1/30 to 1/50,000’sec. (NTSC), 1/25 to 1/50,000 sec. (PAL)
2. AGC (Auto Gain Control) – Adjusts the AGC 1 ~ 15. –
EXPOSURE
1. SHUTTER 2. AGC3. SENS-UP 4. BRIGHTNESS 5. D-WDR 6. DEFOG 7. RETURN
AUTO ||||||||||||||||||||15 AUTO |||||||||||||||||||| 40 OFF OFF RET
–
–
3. INCREASE SENSITIVITY
–
– Low light sensitivity is greatly improved with the use of this
function.
–
– Low light sensitivity level is adjustable from 2 to 30 tim-es. -When SENS-UP level is higher, the picture becomes b–righterwhile noise is increased at the same rate of SENS-UP.-
AUTO : Adjustable SENS-UP level between x2 ~ x30. —
OFF : SENS-UP is disabled. Default setting is <x4>
—
EXPOSURE
1. SHUTTER
AUTO
—
2. AGC
||||||||||||||||||||15
3. SENS-UP
AUTO
4. BRIGHTNESS
|||||||||||||||||||| 40
5. D-WDR
OFF
—
6. DEFOG 7. RETURN
OFF RET
–
EXPOSURE
1. SHUTTER 2. AGC
AUTO ||||||||||||||||||||15
–
3. SENS-UP
AUTO
4. BRIGHTNESS 5. D-WDR
|||||||||||||||||||| 40 OFF
–
6. DEFOG
OFF
7. RETURN
RET
4. BRIGHTNESS – Adjusts the brightness in 1 ~ 100. (Default 40).
11
—
5. D-WDR (Digital Wide Dynamic Range) – D-WDR Functi-o-n
scans both dark and bright clearly. This model achieves its best
set up for different levels of backlit or contrast lighting
–
situations.
–
EXPOSURE
—
1. SHUTTER
AUTO
2. AGC 3. SENS-UP
||||||||||||||||||||15 AUTO
–
4. BRIGHTNESS
|||||||||||||||||||| 40
5. D-WDR
OFF
6. DEFOG
OFF
7. RETURN
RET
–
–
– – DEFAULT: Initialize all settings of the defog.– RETURN: Return to EXPOSURE or SAVE & EXIT.7. – RETURN: Return to the MAIN MENU or SAVE & EXIT.
(A) Original Image
(B) DEFOG ON
—
Adjusts
the
level
in
0
~
8.
(Default
2)
6.8 BACKLIGHT
MAIN MENU
1. LENS
DC
2. EXPOSURE
–
3. BACKLIGHT 4. WHITE BAL5. DAY&NIGHT
OFF ATW AUTO
6. NR
(A) Original Image
(B) D-WDR ON
7. SPECIAL 8. ADJUST 9. EXIT
SAVE&END
6. DEFOG – Images in lowvisibility environments such as fog or
–
rain or in a very strong luminous intensity have DR (dynamic range), lower than ordinary images. Contrast-based defog
function is used to overcome such shortcoming.
1. BLC – Used for backlight environment.
(HIG( H / MIDDLE / LOW)
)
–
EXPOSURE
1. SHUTTER
AUTO
2. AGC
||||||||||||||||||||15
–
3. SENS-UP 4. BRIGHTNESS
AUTO |||||||||||||||||||| 40
5. D-WDR
OFF
6. DEFOG
OFF
7. RETURN
RET
HIGH
MIDDLE
LOW
BLC
MAIN MENU
–
– POS / SIZE: Determines the coordinate of the vertical /
-Horizontal position and size.
1. LEVEL 2. AREA 3. DEFAULT 4. RETURN
MIDDLERET
1. LENS2. EXPOSURE3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL
DCBLC ATW AUTO
–
–
DEFOG
1. POS / SIZE
2. GRADATION
|||||||||||||||||||| 0
8. ADJUST 9. EXIT
SAVE&END
3. DEFAULT
–
4. RETURN
RET
– GRADATION: Adjusts the gradation 0 ~ 2.
–
–
12
–
13
—
–
2. HSBLC – Can mask the head lights to view car license- number
plates more clearly.
–
ECLIPSE MASKING AREA
–
–
–
ECLIPSE ON
ECLIPSE OFF
MAIN MENU
1. LENS
DC
-2. EXPOSURE3. BACKLIGHT 4. WHITE BAL
HSBLC ATW
5. DAY&NIGHT 6. NR
AUTO
7. SPECIAL8. ADJUST9. EXIT
SAVE&END
HSBLC
1. SELECT 2. DISPLAY 3. BLACK MASK 4. LEVEL 5. MODE 6. DEFAULT 7. RETURN
AREA1 ON ON |||||||||||||||||||| 20 ALL DAYRET
– SELECT: You can select up to 4 areas.
–
-DISPLAY:
Determines
whether
to
use
the
HSBLC
selected
in
AREA SELECT. – -ON: Determines the coordinate of the vertical / horizontal
po- sition and size. – BLACK MASK: BLACK MASK ON / OFF
– LEVEL: Adjusts the level 0 ~ 100.– -MODE: ALL DAY / NIGHT Adjusts the AGC level 0 ~ 255 when selecting NIGHT. – -DEFAULT: Initialize all settings of the HSBLC. – RETURN: Return to the MAIN MENU or SAVE & EXIT.
3. OFF
14
6.9 WHITE BALANCEThis is useful when the camera is installed in different artificial lighting conditions where a standard `White Balance’ condition is not suitable for alll.
MAIN MENU
1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFF ATW AUTOSAVE&END
1. ATW (Auto Tracking White Balance): This mode can be used within the colour temperature range 2,000K – 20,000K.
2. AWB (Auto White Balance): Shows the AWB encompassing all the colour temperature spaces without separately specifying a white area in-line with the colour temperature.
3. MANUAL: In the Manual mode, the user can choose thecolour and temperature. The user can adjust the colour and temperature by changing the red and blue gain.
MANUAL
1. BLUE 2. RED3. RETURN
|||||||||||||||||||| 50 |||||||||||||||||||| 50RET
4. OUTDOOR: A colour temperature is fixed for use in the outdoor environment.
5. INDOOR: A colour temperature is fixed for use in the indoor environment.
6. AWC
SET: This mode is used to fix the colour
temperature value once it is set under a certain colour
temperature environment. When AWC
SET of the OSD
MENU is on, the colour temperature is fixed in 1-2 seconds.
15
If one or more values of each OPD Block are included in the ATW area, the colour temperature is fixed by the corresponding OPD data. Otherwise, it becomes fixed by all the OPD data.6.10 BLACK AND WHITE IMAGEYou can display pictures in colour or black / white.
MAIN MENU
1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFF ATW AUTOSAVE&END
1. AUTO: Automatically turns between Day and Night mode according the CDS operation. You can select the duration time of the Day / Night mode by changing 0 ~ 60. – D N: To adjust LUX level for switching Day to Night – N D: To adjust LUX level for switching Night to Day2. EXIT: Colour or black / white is controlled by the signal coming from an external GPIO port.3. BW: The picture is always in black and white. – BURST: ON / OFF – IR AMART: ON / OFF Adjusts the level 0 ~ 15. (Default 3)4. COLOUR: The picture is always in colour.
16
—
6.11
–
NR (NOISE REDUCTION)
–
Noise Reduction (NR) is used in order to obtain a high qual-i-ty
output image and enhance compression efficiency. Offers E-dge
Preserving 2D NR and Motion Adaptive 3D NR.
–
–
MAIN MENU
–
1. LENS
DC
2. EXPOSURE
3. BACKLIGHT
OFF
–
4. WHITE BAL
ATW
5. DAY&NIGHT
AUTO
–
6. NR
7. SPECIAL
8. ADJUST
9. EXIT
SAVE&END
—
1. 2D NR: Cuts off the noise in low light conditions. —
NR
1. 2DNR
ON
2. 3DNR 3. RETURN
ON RET
—
2. 3D NR: Cuts off the noise in low light conditions.
—
3. RETURN: Return to the MAIN MENU or SAVE & EXIT.
9. SPECIAL
–
1. CAM TITLE: If you enter a title, the title will appear on the
monitor.
–
1. Position thearrow to point to SPECIAL using the UP and
DOWN selection.
2. Select ON by using the LEFT and RIGHT selection. When you press the button to complete ON, it will display CAM TITLE.
NOTE: If OFF is selected, CAM TITLE will not appear on the
monitor, even if it has been input.
–
SPECIAL
CAM TITLE
1. CAM TITLE 2. D-EFFECT 3. MOTION 4. PRIVACY 5. LANGUAGE 6. DEFECT7. RETURN
ONOFF OFF ENGRET
0 1 2 3 4 5 6 7 8 9 AB C D E F G H I J K LM N O PQ R ST U V W X Y Z ( )/ = & : ~ , .CLR POS END —————————————-
–
17
–
–
–
3. Up to 15 letters are available for the CAM TITLE. – Move the cursor to the letters by using the UP and DOWN
selections.
– Set an ID from 0-9, A-Z by using the UP, -DOW N, LEF- T and
RIGHT selections.
– Lock in the letters by using the button. When the lett-er is
locked in, the cursor will move to the next space.
– Repeat the above to input CAM TITLE.
4. When a name has been chosen, please select a position for
the name to display.
–
– Move the cursor onto POS and then press the button.
– The name will appear at the top right corn-er.
– Find the position you wish to display the name by u-singthe 4 directional selections, and then press the button to finish.
5.
Select
END,
press
button
to
complete
CAM
TITLE input. –
2. D-EFFECT:
SPECIAL
D-EFF-ECT
1. CAM TITLE 2. D-EFFECT3. MOTION 4. PRIVACY5. LANGUAGE 6. DEFECT 7. RETURN
ONOFF OFF ENGRET
1. FREEZE 2. MIRROR
OFF OFF
–
3. NEG . IMAGE
OFF
–
4. RETURN
– RET
–
–
–
– FREEZE: You can view still or moving pictures. –
– MIRROR: ROTATE / V-FLIP / MIRROR / OFF.
–
– NEG. IMAGE: Negative ON / OFF
–
–
– RETURN:Return to SPECIAL MENU or SAVE & E-XIT.
–
–
–
–
–
–18 –
––––
3. MOTION
–
SPECIAL
–
1. CAM TITLE
OFF
2. D-EFFECT
3. MOTION
OFF
4. PRIVACY
OFF
5. LANGUAGE
ENG
6. DEFECT
7. RETURN
RET
–
– SELECT: You can select up to 4MD areas.
–
MOTION
1. SELECT
AREA1
–
2. DISPLAY
OFF
3. SENSITIVITY
|||||||||||||||||||| 30
4. COLOR 5. TRANS
BLUE 1.00
–
6. ALARM
TIME
7. DEFAULT
8. RETURN
RET
– DISPLAY: Determines whether to use the MD area selected in AREA SELECT.
ON: Determines the coordinate of the vertical / horizontalposition and size. – SENSITIVITY: Determines the coordinate of sensitivity-.
– COLOUR: GREEN, RED, WHITE and BLUE.
–
– TRANS: Set the colour transparency for displaying a
detected area.
–
– ALARM: Set the alarm output (VIEW TYPE, OSD VIEW- , etc)
–
– DEFAULT: Initialize all setting of the MOTION.
–
– RETURN: Return to SPECIAL MENU or SAVE & EXIT.
4. PRIVACY
–
–SPECIAL
1. CAM TITLE
OFF
2. D-EFFECT
–
3. MOTION
OFF
4. PRIVACY
OFF
5. LANGUAGE 6. DEFECT
ENG
–
7. RETURN
RET
–
–
19
–
–
SELECT: You can select up to 4 PRIVACY areas.
—
PRIVACY
—
1. SELECT 2. DISPLAY3. COLOR 4. TRANS 5. DEFAULT6. RETURN
AREA1 OFF 0 3RET
—
DISPLAY: Determines
AREA
SELECT.
whether
to
use
-the
MD
area
s-ele-cted
in
COLOUR: CYAN, GREEN, WHITE and USER.
YELLOW,
BLUE,
RED,
W-HI-TE,
TRANS: area.
Set
the
colour
transparency
for
displaying
DEFAULT: Initialize all setting of the PRIVA CY.
a
de–tected —
RETURN:
Return
to
the
SPECIAL
MENU
or
SAVE
&
E-X- IT.
5 . LANGUAGE
–
–
E NG / ARB / HEB / JPN / KOR / TUR / NED/ POR / RUS / POL /
S PA / ITA / FRA / GER / CHN2 / CHN1.
(Supports up to 16 Languages)
–
SPECIAL
1. CAM TITLE 2. D-EFFECT
OFF
–
3. MOTION 4. PRIVACY
OFF OFF
–
5. LANGUAGE
ENG
6. DEFECT
7. RETURN
RET
–
–
6. DEFECT
–
–
––
–
SPECIAL
1. CAM TITLE 2. D-EFFECT
OFF
3. MOTION
4. PRIVACY
OFF OFF
–
5. LANGUAGE
ENG
–
6. DEFECT
7. RETURN
RET
–
– LIVE DPC (Live Dead Pixel Correction)
—
– AGCLevel: Adjust the AGC level 0 ~ 255.
20
–
–
– LEVEL: Adjust the LEVEL 0 ~ 100. – RETURN: Return to DEFECT MENU or SAVE & E-XIT.
DEFECT
1. LIVE DPC 2. WHITE DPC3. BLACK DPC4. RETURN
OONN OFF RET
LIVE DPC
1. AGC LEVEL 2. LEVEL
|||||||||||||||||||| 64|||||||||||||||||||| 80
3. RETURN
RET
–
–
WHITEDPC
(White Dead
Pixel
Correction)
WHITE DPC
1. POS / SIZE
2. START 3. DPC VIEW
OFF
4. LEVEL 5. AGC
|||||||||||||||||||| 10 |||||||||||||||||||| 10
6. SENS-UP 7. RETURN
x4 RET
– POS / SIZE: Adjusts the position and size.
–
– START
– DPC VIEW: ON / OFF
– LEVEL: Adjust the LEVEL 0 ~ 60.
– AGC: Adjust the LEVEL 0 ~ 14.
– SENS-UP: Adjust the LEVEL x2 ~x30.
– BLA- C-KRDEPTCUR(BNla:cRkeDtuerandtoPDixEelFCEoCrTreMctiEoNn)U or SAVE & EXIT.
–
BLACK DPC
1. POS / SIZE 2. START
3. DPC VIEW
OFF
4. LEVEL
|||||||||||||||||||| 255
5. RETURN
RET
– POS / SIZE: Adjust the position and size.
– – START
– – DPC VIEW: ON / OFF
– LEVEL: Adjust the LEVEL 0 ~ 255.– RETURN: Return to DEFECT MENU or SAVE & EXIT.
21
–
–
– RETURN: Return to SPECIAL MENU or SAVE & EXIT.
7. RETURN: Return to MAIN MENU or SAVE & EXIT.
6.12 ADJUST
MAIN MENU
1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT
DC OFF ATW AUTOSAVE&END
–
–
–
–
—
–
1. SHARPNESS:
–
—
–
— LEVEL: Adjusts the LEVEL 0 ~ 255.-
–
-a-tSnTiAgRhtTisAiGmCp:roWvheednwthhielelenvoeisl eisishiignhc,r-ethaesesdh.arpness-of picture
– END AGC: Set to 255 level for optim-ised definition a- t night.
–
– RETURN: Return to ADJUST MENU or SAVE & EXIT.
–
–
ADJUST
1. SHARPNESS
AUTO
SHARPNESS
–
1. LEVEL
– |||||||||||||||||||| 6
–
2. MONITOR 3. LSC 4. VIDEO.OUT
LCD OFF NTSC
– 2. START AGC3. END AGC 4. RETURN
|||||||||||||||||||| 128– |||||||||||||||||||| 255RET
5. OUT. MODE 6. RETURN
AHD RET
–
–
–
–
––
–
–
22
–
–
–
–
–
2. M ONITOR
A. LCD
– GAMMA: Adjust LEVEL 0.45 ~ 1.00, USER.
– BLUE GAIN: Adjust LEVEL 0 ~ 100.
– RED GAIN : Adjust LEVEL 0 ~ 100.
– RETURN: Return to ADJUST MENU or SAVE & EXIT.
ADJUST
1. SHARPNESS 2. MONITOR3. LSC4. VIDEO.OUT 5. OUT. MODE 6. RETURN
AUTO LCDOFF NTSC AHD RET
LCD
1. GAMMA 2. BLUE GAIN3. RED GAIN4. RETURN
USER |||||||||||||||||||| 70 |||||||||||||||||||| 70RET
B. CRT
– BLUE GAIN: Adjust LEVEL 0 ~ 100. – RED GAIN : Adjust LEVEL 0 ~ 100. – RETURN: Return to ADJUST MENU or SAVE & EXIT.
3. LSC Lens Shading Correction (LSC) corrects the instance where the image gets darkened or blurred on the periphery.
ADJUST
1. SHARPNESS 2. MONITOR 3. LSC 4. VIDEO.OUT 5. OUT. MODE 6. RETURN
AUTO LCDOFF NTSC AHD RET
4. VIDEO OUT
NTSC / PAL: Video output can be set to NTSC or PAL
according to local TV standard.
ADJUST
1. SHARPNESS
AUTO
2. MONITOR
LCD
3. LSC
OFF
4. VIDEO.OUT
NTSC
5. OUT. MODE
AHD
6. RETURN
RET
23
5. OUT. MODE
ADJUST
1. SHARPNESS 2. MONITOR 3. LSC 4. VIDEO.OUT 5. OUT. MODE 6. RETURN
AUTO LCD OFF NTSC AHD RET
6. RETURN: Return to MAIN MENU or SAVE & EXIT. If the version of DVR is 1.0, DISTANCE menu is added. DISTANCE menu enables to choose NORMAL or LONG depending on length of cable.6.13 EXIT
MAIN MENU
1. LENS
2. EXPOSURE
34..
BACKLIGHT WHITE BAL
5. DAY&NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. EXIT
DC OFF ATW AUTOSAVE&END
1. SAVE & EXIT: Save the current settings and exit the menu. 2. NOT SAVED: Do not save the current settings and exit themenu. 3. RESET: Reset the camera settings to factory default.7.0 CARE AND MAINTENANCE Always keep camera clear from dirt and mud. Clean camera with a soft moist cloth.
8.0 WARRANTY TERMS & CONDITIONSOur goods come with guarantees that cannot be excluded under the Australian & New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.This warranty is provided in addition to your rights under the Australian & New Zealand Consumer Law.Directed Electronics Australia Pty Ltd (Directed Electronics) warrants that this product is free from defects in material and workmanship for a period of 12 months from the date of purchase or for the period stated on the packaging. This warranty is only valid where you have used the product in accordance with any recommendations or instructions provided by Directed Electronics.This warranty excludes defects resulting from alterations of the product, accident, misuse, abuse or neglect.In order to claim the warranty, you must return the product to the retailer from which it was purchased or if that retailer is part of a National network, a store within that chain, along with satisfactory proof of purchase. The retailer will then return the goods to Directed Electronics. Directed Electronics will repair, replace or refurbish the product at its discretion. The retailer will contact you when the product is ready for collection. All costs involved in claiming this warranty, including the cost of the retailer sending the product to Directed Electronics, will be borne by you.Directed Electronics Address: 115-119 Link Road Melbourne Airport, 3045 Victoria. AustraliaPh: +61 03 8331 4800 Email:
24
25
INDEMNITYYOU AGREE TO DEFEND, INDEMNIFY AND HOLD HARMLESS PARKMATE AND ITS SUBSIDIARIES AND AFFILIATES FROM AND AGAINST ANY AND ALL CLAIMS, PROCEEDINGS, INJURIES, LIABILITIES, LOSSES, COSTS AND EXPENSES (INCLUDING REASONABLE LEGAL FEES), INCLUDING BUT NOT LIMITED TO, CLAIMS ALLEGING NEGLIGENCE, INVASION OF PRIVACY, COPYRIGHT INFRINGEMENT AND/ OR TRADEMARK INFRINGEMENT AGAINST PARKMATE AND ITS SUBSIDIARIES AND AFFILIATES OR THE PARKMATE SERVICES, RELATING TO OR ARISING OUT OF YOUR BREACH OF ANY PROVISION OF THESE TERMS, YOUR MISUSE OF THE PARKMATE OR PARKMATE SERVICES, OR YOUR UNAUTHORIZED MODIFICATION OR ALTERATION OF PRODUCTS OR SOFTWARE.WARRANTY AND WARRANTY DISCLAIMERPARKMATE HAS A LIMITED WARRANTY ON WHEREBY PARKMATE WARRANTS TO AND ONLY TO YOU THAT THE ON PARKMATE VEHICLE DASH CAMERAS, MIRROR DASH CAMERAS, FRONT, REAR AND REVERSING CAMERAS AND MIRROR MONITOR DEVICES WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP FOR ONE (1) YEAR FROM THE DATE OF YOUR PURCHASE OF THE ON PARKMATE VEHICLE DASH CAMERAS, MIRROR DASH CAMERAS, FRONT, REAR AND REVERSING CAMERAS AND MIRROR MONITOR DEVICES (UNLESS A LONGER WARRANTY PERIOD IS REQUIRED BY LAW). THE SPECIFICS OF THIS PARKMATE LIMITED WARRANTY ARE AT HTTPS://WWW.PARKMATE.COM.AU/WARRANTYTO THE EXTENT POSSIBLE UNDER GOVERNING LAW, OTHER THAN THE ABOVE PRODUCT WARRANTY FOR THE PARKMATE VEHICLE DASH CAMERAS, MIRROR DASH CAMERAS, FRONT, REAR AND REVERSING CAMERAS AND MIRROR MONITOR DEVICES, YOU UNDERSTAND AND AGREE THAT THE PARKMATE SERVICES ARE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS. PARKMATE MAKES NO WARRANTY THAT THE PARKMATE SERVICES WILL MEET YOUR REQUIREMENTS OR THAT USE OF THE PARKMATE SERVICES26
WILL BE UNINTERRUPTED, TIMELY, SECURE OR ERRORFREE NOR DOES PARKMATE MAKE ANY WARRANTY AS TO THE ACCURACY OR RELIABILITY OF ANY INFORMATION OBTAINED THROUGH THE PARKMATE SERVICES (INCLUDING THIRD PARTY CONTENT), THAT ANY DEFECTS IN THE PARKMATE SERVICES WILL BE CORRECTED OR THAT THE PARKMATE PRODUCTS OR PARKMATE SERVICES WILL BE COMPATIBLE WITH ANY OTHER SPECIFIC HARDWARE OR SERVICE. FURTHER, PARKMATE DOES NOT WARRANT THAT THE PARKMATE SERVICES OR THE PARKMATE SERVERS THAT PROVIDE YOU WITH DATA AND CONTENT ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. PARKMATE ALSO ASSUMES NO RESPONSIBILITY FOR AND SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY VIRUSES THAT MAY INFECT YOUR PARKMATE VEHICLE DASH CAMERAS, MIRROR DASH CAMERAS, FRONT, REAR AND REVERSING CAMERAS AND MIRROR MONITOR DEVICES, COMPUTER SOFTWARE, OR OTHER HARDWARE.YOU AGREE THAT PARKMATE IS NOT AN INSURER AND THAT PARKMATE IS NOT PROVIDING ME WITH INSURANCE OF ANY TYPE. ANY AMOUNTS THAT YOU PAY PARKMATE FOR THE PARKMATE SERVICE ARE NOT INSURANCE PREMIUMS AND ARE NOT RELATED TO THE VALUE OF YOUR VEHICLE OR PROPERTY, ANYONE ELSE’S PROPERTY LOCATED IN YOUR VEHICLE OR PREMISES, OR ANY RISK OF LOSS IN YOUR VEHICLE OR AT YOUR PREMISES. IF YOU WANT INSURANCE TO PROTECT AGAINST ANY RISK OF LOSS AT YOUR VEHICLE OR PREMISES, YOU WILL PURCHASE IT. IN THE EVENT OF ANY LOSS, DAMAGE OR INJURY, YOU WILL NOT LOOK TO PARKMATE TO COMPENSATE YOU OR ANYONE ELSE. YOU RELEASE AND WAIVE FOR YOURSELF AND YOUR INSURER ALL SUBROGATION AND OTHER RIGHTS TO RECOVER AGAINST PARKMATE ARISING AS A RESULT OF THE PAYMENT OF ANY CLAIM FOR LOSS, DAMAGE OR INJURY.PARKMATE’S EQUIPMENT AND SERVICES DO NOT CAUSE AND CANNOT ELIMINATE OCCURRENCES OF CERTAIN EVENTS, INCLUDING, BUT NOT LIMITED TO, VEHICLE ACCIDENTS, PROPERTY DAMAGE, LOST PROPERTY, THEFT OF VEHCLE , THEFT OF PROPERTY. PARKMATE MAKES27
NO GUARANTEE OR WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, THAT THE PARKMATE EQUIPMENT AND SERVICES PROVIDED WILL DETECT OR AVERT SUCH INCIDENTS OR THEIR CONSEQUENCES. PARKMATE DOES NOT UNDERTAKE ANY RISK THAT YOU OR YOUR VEHICLE OR PROPERTY, OR THE PERSON OR PROPERTY OF OTHERS, MAY BE SUBJECT TO INJURY OR LOSS IF SUCH AN EVENT OCCURS. THE ALLOCATION OF SUCH RISK REMAINS WITH YOU, NOT PARKMATE.OTHER THAN THE ABOVE PRODUCT WARRANTY FOR THE PARKMATE VEHICLE DASH CAMERAS, MIRROR DASH CAMERAS, FRONT, REAR AND REVERSING CAMERAS AND MIRROR MONITOR DEVICES, PARKMATE AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE PARKMATE EQUIPMENT AND ANY ASSOCIATED APP/ SERVICE. INCLUDING ANY IMPLIED WARRANTY OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON INFRINGEMENT OF THIRD PARTY RIGHTS. BECAUSE SOME JURISDICTIONS DO NOT PERMIT THE EXCLUSION OF IMPLIED WARRANTIES, THE LAST SENTENCE OF THIS SECTION MAY NOT APPLY TO YOU. PARKMATE HEREBY FURTHER EXPRESSLY DISCLAIMS ALL LIABILITY FOR ANY CLAIMS FOR SERVICE FAILURES THAT ARE DUE TO NORMAL PRODUCT WEAR, PRODUCT MISUSE, ABUSE, PRODUCT MODIFICATION, IMPROPER PRODUCT SELECTION OR YOUR NON-COMPLIANCE WITH ANY AND ALL APPLICABLE FEDERAL, STATE OR LOCAL LAWS. THIS WARRANTY AND WARRANTY DISCLAIMER GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE, OR COUNTRY. OTHER THAN AS PERMITTED BY LAW, PARKMATE DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU HAVE, INCLUDING THOSE THAT MAY ARISE FROM THE NONCONFORMITY OF A SALES CONTRACT. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR STATE, PROVINCE, OR COUNTRY. FOR OUR AUSTRALIAN CUSTOMERS: PLEASE NOTE THAT THIS WARRANTY IS IN ADDITION TO ANY28
STATUTORY RIGHTS IN AUSTRALIA IN RELATION TO YOUR GOODS WHICH, PURSUANT TO THE AUSTRALIAN CONSUMER LAW, CANNOT BE EXCLUDED.LIMITATIONS OF PARKMATE LIABILITYUNDER NO CIRCUMSTANCES WILL PARKMATE BE LIABLE IN ANY WAY FOR ANY CONTENT, INCLUDING, BUT NOT LIMITED TO, THE LOSS OF CONTENT, ANY ERRORS OR OMISSIONS IN ANY CONTENT, OR ANY LOSS OR DAMAGE OF ANY KIND INCURRED IN CONNECTION WITH USE OF OR EXPOSURE TO ANY CONTENT POSTED, EMAILED, ACCESSED, TRANSMITTED, OR OTHERWISE MADE AVAILABLE VIA THE PARKMATE APP.PARKMATE LIABILITY FOR DAMAGES, ESPECIALLY FOR BREACH OF DUTY OR OBLIGATION, DELAY IN PERFORMANCE, NON-PERFORMANCE, OR MALPERFORMANCE SHALL BE PRECLUDED, EXCEPT WHEN THESE ARE DUE TO NEGLIGENT BREACHES OF ANY SIGNIFICANT CONTRACTUAL DUTY OR OBLIGATION ON THE PART OF PARKMATE. ANY LIABILITY FOR NEGLIGENCE IS LIMITED TO DIRECT LOSSES USUALLY AND TYPICALLY FORESEEABLE IN SUCH CASE. SHOULD THE CLAIM FOR DAMAGES BE BASED ON WILFUL OR GROSSLY NEGLIGENT BREACH OF CONTRACTUAL DUTY OR OBLIGATION ON THE PART OF PARKMATE, THE PRECLUSION AND LIMITATION OF LIABILITY MENTIONED IN THE PRECEDING SENTENCES WILL NOT APPLY. THE PRECEDING PRECLUSION AND LIMITATION OF LIABILITY WILL ALSO NOT APPLY TO CLAIMS FOR DAMAGES ARISING OUT OF LOSS OF LIFE, BODILY INJURY OR HEALTH IMPACTS FOR WHICH PARKMATE MAY BE LIABLE, OR FOR NON-CONTRACTUAL LIABILITY.SOME STATES AND COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. ADDITIONALLY, THIS PROVISION IS NOT INTENDED TO LIMIT PARKMATE’S LIABILITY IN THE EVENT OF PARKMATE’S WILLFUL OR INTENTIONAL MISCONDUCT.29
9.0 NOTES
30
31
32
33
V1.0
All Images, Information and Content are Copyright © 2020 Directed Electronics Australia Pty Ltd. All Rights Reserved.www.parkmate.com.au | www.parkmatehd.co.nz
report this adwww.directed.com.au www.directed.co.nz
[xyz-ips snippet=”download-snippet”]