PATPET N9 Dog Nail Grinde User Manual

Table of Contents

PATPET N9 Dog Nail Grinde

Product Diagram

Package Contents

USB Charging Cable	Grinding Wheel N0.2	User Manual
Pet Nail Grinder

Product Specification

Product name	Pet Nail Grinder
Charger	Input: AC100-240V 50/60Hz Output: DC5V I 000mA
Battery type	Li-ion battery 3.7V 650mAh
Charging time	1.5h
Using time	8h

HOW to Charge

Insert the charging plug into the slot of the nail grinder.
Insert the USB plug into the USB charger (mobile phone charger).
Insert the charger into the power outlet after confirming the product is in the OFF state

Method of Application

Choose a proper port according to your pet’s nail characteristic.
When starting grinding, put the pet nail into the grinding wheel for no longer than 5 seconds each time.
The extra NO. 2 grinding wheel is a coarse one, applicable to pets with thicker nails with higher efficiency.

* Please clean the impurities on the nail grinding wheel surface when the nail grinding effects are reduced.

Indicator Instruction

Under power-on status, press Turbo button, the light will be on, indicating the nail grinder is working at the high speed. press the Turbo button again to restore the initial speed.

Indicator instruction when charging

Indicators will light up one by one under charging status.
The battery is fully charged when all indicators are on without blinking.

Indicator instruction when using

When 100%-50% power left, all indicators are on without blinking.
When 50%-20% power left, is off, the other indicators are on without blinking.
When 20%-5% power left, is on without blinking, the other indicators are off.
When 5%-0% power left. is blinking quickly, the other indicators are off”
When all lights go out, the grinder stops working. indicating the battery is fully discharged, please recharge it before using.*When fully charged, the product automatically cuts off power. The charging protection function starts to work to prevent damage from overcharging.*When battery completely runs out, the over discharging protection function will be automatically activated to prevent the battery from over discharging and protect battery lifespan.

Loading & Unloading Grinding Wheel

Unloading the grinding wheel

Rotate the protective sleeve anticlockwise to remove it.
Hold the grinding wheel and pull upwards to take it out.

Loading the grinding wheel

Align the hexagon copper shaft of the grinding wheel with hexagon hole in the nail grinder body and press in.
Put the protective sleeve onto the nail grinder and turn clockwise to fix it .

Cleaning

Rotate the protective sleeve of the nail grinding wheel anticlockwise and take it down.
Start the nail grinding machine to make the nail grinding wheel rotate.
Gently touch the rotating nail grinding wheel with an eraser or a piece of cloth to remove the nail powder left on the grinding wheel surface.

Cautions

Do not tear down the product at random.
Do not clean product by water flush, and keep the unit away from damp situation.
Do not use any corrosives such as alcohol, gasoline etc. to clean the surface.
Avoid being charged above 40-C or below 0°C.* If the product is not used for a long time, please charge it once at least every three months.* Product becoming hot during use or charging is normal.

Disposal of BatteryThe inside is rechargeable Li-ion battery. Please take the battery out before discarding it and dispose the battery in an environment-friendly way.

https://patpet.com/ Become a dealer: [email protected] After-service: [email protected] @PatpetDogCollar YouTube Video Guide