PELONIS
OWNER’S MANUAL20″ BOX FANMODEL: PFB50A2ABB-V
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
CAUTIONRead Rules for Safe Operation and Instructions Carefully.
WARNING
- To reduce the risk of fire or electrical shock, do not use this fan with any solidstate speed control device.
- If the power cord is damaged, it is strongly recommended to request a specialist to handle.
- This appliance has a polarized plug ( one blade is wider than the other ).To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug .If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not leave the fan running unattended.
RULES FOR SAFE OPERATION
- Never insert fingers, pencils, or any other objects through the fan housing when the fan is running. Unplug the fan when moving it from one location to another.
- Disconnect the fan before cleaning.
- To avoid overturning, be sure the fan is on a stable surface when operating it.
- The rules about cord and plug as below:(1) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the products. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/ or repair.(2) Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Ensure that the fan is switched off from the supply mains before removing the grille.
READ AND SAVE THESE INSTRUCTIONS
ASSEMBLY
- Unpack the packing box and pull the fan out. 2. Place the fan upside down and rotate the feet90 degrees counterclockwise so the feet are perpendicular to the fan body. This will stabilize the fan for use. (See Fig. 1) 3. Flip the fan right side up for use. (See Fig. 2)
OPERATING INSTRUCTIONS
- Plug the fan into any standard household outlet.
- The Speed Control Knob will turn the fan on and off and also allow you to rotate between speeds.
- Speeds – Position: 1-low 2-medium 3-high 0-off
USER SERVICING INSTRUCTIONS
a) Grasp plug and remove from the receptacle or other outlet device.Do not unplug by pulling on cord.b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.c) Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse.d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)that should not be removed. Discard product if the attachment plug is damaged.
Notice:
- When you replace fuse, please don’t operate suddenly or overexert, or else theproduct will be damage or cause accident.
- When you feel it hard to be operated, please make sure you have got the rightway.
CLEANING
- Be sure to unplug from the electrical supply source before cleaning.
- Plastic parts should be cleaned with mild soap and damp cloth or sponge. Thoroughly remove soap film with clean water.
- Be sure not to submerge in water or other liquids.
- Avoid getting water or other liquids inside the motor housing.
1-866-646-4332Email us at: For questions or comments,please write to: Midea America Corporation Customer Care Center 5 Sylvan Way Parsippany, NJ 07054PRINTED IN CHINA
ONE (1) YEAR LIMITED WARRANTYPlease read all instructions before attempting to use this product.Media America Corporation warrants as limited herein to the original purchaser of retail that each new Fan, shall be free of defects in material and workmanship for a period of one (1) year from the date of original purchase. This one (1) year warranty is limited to the Motor and Electric Element.
In the event of malfunctions or failure of your Fan, simply deliver or send the Fan, postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1) year, to Midea America Corporation. Midea America Corporation reserves the right to inspect the claimed defective part or parts to determine if the defect or malfunction complaint is covered by this warranty. Midea America Corporation shall, within sixty(60)days after receipt of the product, at its option, repair and/or replace the defective part or parts free of charge. This warranty shall only cover defect arising from normal usage. Midea America Corporation assumes no responsibility whatsoever if the Fan should fail during the warranty period by reason of:
- Misuse, negligence, physical damage or accidents.
- Lack of maintenance (see instructions for proper maintenance).
- Repair by any unauthorized party during the warranty period.
- Damage caused by connection to an improper input voltage (see specification label on your Fan).
Midea America Corporation makes no further warranties or representations, express or implied except those contained herein. No representative or dealer is authorized to assume any other liability regarding the Fan. The duration of the implied warranty granted under State law, including warranties of merchant ability and fitness for particular purpose are limited in duration should the duration of the express warranty grant it hereunder. Midea America Corporation shall in no event be liable for direct, indirect, special or consequential damages.
Some states do not allow limitations on how long an implied warranty lasts, and/or the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
References
[xyz-ips snippet=”download-snippet”]