PET GEAR No-zip Double Pet Stroller PG8700NZ Instruction Manual

For The ON-THE-GO Pet™INSTRUCTION MANUALNO-ZIP DOUBLE PET STROLLERPG8700NZ

To see our full line of products, visit us online at: www.petgearinc.com

CUSTOMER SERVICE HELP DESK[email protected]Toll-Free 877-752-9123 – Eastern Standard Time 8 am-3 pm, Monday through Friday

PARTS LIST

Check that you have all the parts shown BEFORE assembling your product.If any parts are missing, call Customer Service.

UNFOLDING THE STROLLER

Step 1. Release folding latch (A).Step 2. Spread handle (B) and seat apart until the frame clicks and locks on both sides.Step 3. Ensure that the stroller is locked in on both sides before using. NO-ZIP DOUBLE PET STROLLER • PG8700NZ

OPENING THE STROLLER

Spread the canopy apart to the open position.

Apply brake lever by pushing down with toe.Ensure brakes are applied when parking the stroller.Release by lifting the brake lever with a toe.WARNING: Never leave your stroller parked without applying brakes.

BACK WHEEL ASSEMBLY INSTRUCTIONS

Push back wheels until they easily click into place.

Shown with both back wheels in place.

BACK WHEEL ASSEMBLY INSTRUCTIONS

To connect or release wheels from the axle, squeeze the pin in.

FRONT WHEEL ASSEMBLY INSTRUCTIONS

Step 1. To attach front wheels, slide plastic wheel supports up and into the tubing.

Step 2. Slide wheels up until Falco pins pop out of holes.

Step 3. To use the stroller in the locked position for jogging, push pin in.

Step 4. To use the stroller in a swivel position, pull the pin down, and to the right.

TO SECURE COMPARTMENT TO FRAME

Step 1. Open stroller and pull compartment down.Step 2. Clip onto the frame.

TO SECURE LATCH

Step 1. To close the compartment, pull downward and clip the canopy into the front of the stroller until it locks.Step 2. To open the stroller canopy, simply push and release the button to unlock it.

TO SECURE SIDE FLAP

To help secure the compartment, Velcro flap around a tube and fasten to the bottom of the compartment

FOLDING THE STROLLER

Step 1. NOTE: Before folding the stroller, unclip the latch, and open the canopy.Step 2. Slide second frame lock release (C) to the right, while squeezing the mainframe lock release (D) rotate the folding mechanism almost 180 degrees forward until stroller releases and handle is lowered.

CUP HOLDER INSTRUCTIONS

There is a rivet on the side of the stroller handle.To attach the cup holder, slide it down, onto the rivet.

LOOKING AFTER YOUR STROLLER

  • Always store product in a clean, dry place.
  •  Not recommended for use on the beach.
  •  Do not put heavy items on top of the stroller.
  •  Clean the frame by wiping it with a lightly oiled cloth.
  • and warm water.
  • To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and swivels), keep all moving parts clean and lubricated with WD40® or light machine oil.
  •  NOTE: Do not lubricate brake components or swivel locks.
  •  Regularly check the stroller for loose parts. These should be tightened or replaced.

WHEEL MAINTENANCE

  • To clean and lubricate front and rear wheels, push out locking lever under wheel housing to release rear wheel.
  •  To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts clean and lubricated with WD40® or light machine oil.
  •  Push wheelsets back on until they click and lock in position; pull on wheel housings to ensure they are secure.
  • Push stroller back and forth and rotate swivels around to work in lubricant.
  •  Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean off with warm water and dry thoroughly.
  •  NOTE: Do not lubricate brake components or swivel locks.

WARNING!

FOR PETS ONLY.Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, warnings and the instructions could result in serious injury or death.

  •  Do not carry additional bags, goods, or accessories in or on a stroller except as recommended in the manufacturer’s instructions.
  •  Do not leave pets unsupervised in the stroller.
  •  Before making adjustments to the stroller ensure that the pet’s body is clear of any moving parts.
  •  This stroller is designed for one pet only.
  •  Do not hang bags from handles as this may cause the product to become unstable.
  • Do not use on escalator or stairs; fold the stroller and carry.
  • Put on brake whenever you park the stroller.
  •  Ensure the stroller is completely erected and check that all locks are engaged before placing a pet in the stroller.
  •  Do not overload as the stroller may become unstable; the maximum weight of a pet using this stroller is not to exceed 90 lbs.
  •  Any goods carried in the basket not to exceed 6 lbs.

REPLACEMENT PARTS

Use only PET GEAR replacement parts.Please have your model number ready before calling.You can also request parts: http://www.petgearinc.com/main.asp?sel=2

192 Sheldon AvenueWest Rutland, VT 05777877-752-9123www.petgearinc.comNO-ZIP DOUBLE PET STROLLER • PG8700NZ

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,