Philips BHD282 User Manual
Register your product and get support at www.philips.com/welcome
Specifications are subject to change without notice© 2015 Koninklijke Philips N.V.
All rights reserved.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Important
Read this user manual carefully before you use the appliance and keep it for future reference.
- WARNING: Do not use this appliance near water.
- When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a risk, even when the appliance is switched off.
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.- Always unplug the appliance after use.
- If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch the appliance on again, check the grilles to make sure they are not blocked by fluff, hair, etc.
- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom.This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.
- Do not insert metal objects into the air grilles to avoid electric shock.
- Never block the air grilles.
- Before you connect the appliance, ensure that the voltage indicated on the appliance corresponds to the local power voltage.
- Do not use the appliance for any other purpose than described in this manual.
- Do not use the appliance on artificial hair.
- When the appliance is connected to the power, never leave it unattended.
- Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
- Do not wind the mains cord round the appliance.
- Wait until the appliance has cooled down before you store it.
- Do not pull on the power cord after using. Always unplug the appliance by holding the plug.
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.Electromagnetic fields (emf)
This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
Environment
This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU). Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.
Dry your hair
- Connect the plug to a power supply socket.
- For precise drying, attach the concentrator ( 1 ) onto the hairdryer ( 3 ).
- To enhance volume for curls and bouncy style, attach the diffuser ( 2 ) onto the hairdryer ( 3 ).
- To disconnect the attachment, pull it off the hairdryer.
- Adjust the temperature switch ( 5 ) to for hot airflow for fast drying, for warm airflow for drying short hair or styling hair, or for cool airflow to set your style. Press the cool shot button ( 4 ) for cool airflow to fix your style.
- Adjust the airflow switch ( 6 ) to for gentle airflow, for strong airflow, or to switch off.
- To turn the ion function on or off, adjust the ion slide switch to or ( 8 ).The function provides additional shine and reduces frizz. Itis particularly suitable for dry and almost-dry hair.
- If the function is on, the ion indicator ( 9 ) lights up.
- When the function is on, a special odor may be smelt. It is normal and caused by the ions which are generated.
- To turn the ion function on or off, adjust the ion slide switch to
for hot airflow for fast drying, 
for warm airflow for drying short hair or styling hair, or 
for cool airflow to set your style. Press the cool shot button 
( 4 ) for cool airflow to fix your style.
for gentle airflow, 
for strong airflow, or 
to switch off.
With the diffuser: To add volume at the root, insert the pins into your hair and make rotating movements.
- For long hair, spread out sections of hair on top of the diffuser or comb the hair downwards with the pins.
- To fix the style for curly or wavy hair, hold the diffuser at a distance of 10-15cm to let it dry gradually.
After use:
- Switch off the appliance and unplug it.
- Place it on a heat-resistant surface until it cools down.
- Take the air inlet grille ( 10 ) off the appliance to remove hair and dust.
- Clean the appliance by damp cloth.
- Keep it in a safe and dry place, free of dust.You can also hang it with the hanging loop ( 7 ).
Guarantee and service
If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.
References
[xyz-ips snippet=”download-snippet”]