PHILIPS Home power SPC1247AT/27 Instructions
Instructions
SET TIME
- If no numbers are visible on-screen, plug timer into an outlet and charge for 1 hour. Once charged, press the reset ( R ) button in the lower right corner using a toothpick or pencil.
- Use up (
) and down (
) arrows to set the time – note AM or PM. Note: After timer is charged, it can be removed from the outlet for easy programming. Return to outlet when finished.
PROGRAMMING OPTIONS
DEFAULT TIMERTwo ON/OFF programs feature default settings. To activate the default times, press ON TIME or OFF TIME button. Indicator arrows appear on the display to show which programs are set. To deactivate a setting, press the desired button again.
CUSTOMIZED TIMER
Press either ON TIME button, then use up () and down (
) arrows to set on time. Press the ON TIME button again or wait five seconds to store the program and return to clock display.Press either OFF TIME button, then use up (
) and down (
) arrows to set off time. Press the OFF TIME button again or wait five seconds to store the program and return to clock display.Note: An indicator arrow (
or
) appears on-screen to show which settings are active.
OVERRIDE OPTIONS
Override scheduled programs and manually operate the connected device using the ON/OFF button below the display screen or by pressing the decorative door.
If a scheduled program is running and the device is on, press the closed door or ON/OFF button to turn off the device. The device remains off until the next scheduled program begins, or the button is pressed again.
If a scheduled program is running and the device is off, press the closed door or ON/OFF button to turn on the device. It remains on until the next scheduled program ends, or the button is pressed again.
When no programs are active, press the closed door or ON/OFF button to turn ON/OFF the device manually.
COLOR OPTIONS
When plugged in, the LED backlight cycles through the color options. The cycle can be stopped to select a color or turn off the backlight. LEDs only work when the timer is connected to an outlet.
- Press the button on top of the timer once to stopthe cycle.
- Press the button again to change the LED color.
- Repeat to manually cycle through all colors.
- Press the button for three seconds to turn OFF the LED.
- Press the button once to turn ON LED to last setting.
Suppliers Declaration of Conformity | Model #: SPC1247AT/27 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.comThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Standards. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3(B)/NMB-3(B)
SPECIFICATIONS
125VAC, 60Hz, 15A 1875W general/resistive5A 625W tungsten, 1/2HP motorWorks with LED and CFL bulbs
THANK YOU FOR YOUR PURCHASE!
Product instructions made easy
Scan to watch a step-by-step instructional video or visithttps://byjasco.com/49791i
Register your Philips product
Get exclusive, web-only deals and more! Scan here or visitbyjasco.com/deals
Need more holiday timers?
For additional Philips holiday timers visit our website!byjasco.com/timers
Like our product?Leave us a review on Amazon.com or your favorite retailer website.
Having issues and need support?Call our U.S.-based experts Monday– Friday, from 7AM–8PM (Central)1-844-816-0320
WARNING
RISK OF ELECTRICAL SHOCK
- PLUG DIRECTLY INTO AN ELECTRICAL OUTLET
- DO NOT USE IN WET LOCATIONS
- USE INDOORS ONLY
- UNPLUG TIMER BEFORE CLEANING
RISK OF FIRE
- DO NOT USE TO CONTROL APPLIANCES THAT CONTAIN HEATING ELEMENTS (COOKING APPLIANCES, HEATERS, IRONS, ETC.)
- DO NOT EXCEED ELECTRICAL RATINGS
- DO NOT USE WITH EXTENSION CORD
MADE IN CHINA
Philips and the Philips Shield Emblem are registered trademarks ofKoninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of Jasco Products Company, and Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114 is the warrantor in relation to this product.
This product comes with a 1-year limited warranty. Visit www.philips.com/support for warranty details.
Questions? Contact our US-based Consumer Careat 1-844-816-0320 between 7AM-8PM, M-F, Central Time.
References
[xyz-ips snippet=”download-snippet”]