Home PowerSPS3102WB/37v1 12/20
| SJT-B 3-Conductor | 16AWG |
| Maximum Amps | 13 |
| Maximum Volts | 125 |
| Maximum Watts | 1625 |
ATTENTION: INSTRUCTIONS FOR PROPER USE
- Fully extend before using.
- Use only within the electrical rating marked on this cord.
- Unplug when not in use (grasp plug, not cord, to unplug from the outlet).
- Do not splice, repair or modify extension cords.
DO NOT PLUG MORE THAN A TOTAL OF 1625 WATTS INTO THIS CORD
To find total watts being used: if watts are not marked on the appliance, multiply ampere rating (on the nameplate) by 125 to determine equivalent watts. Add determined watts for each plugged-in appliance or lamp (sum of watts on bulbs) to find the total watts being used.
MADE IN VIETNAMPhilips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is soldunder the responsibility of Jasco Products Company, and Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, USA is the warrantor in relation to this product.This product comes with a limited lifetime warranty.
Visit www.philips.com/support for warranty details.Questions? Contact our US-based Consumer Care at1-844-816-0320 between 7 AM-8 PM, M-F, Central Time.
WARNING
RISK OF ELECTRIC SHOCK
- DO NOT USE IN WET LOCATIONS
- KEEP CHILDREN AWAY
- USE INDOORS ONLY
- FULLY INSERT PLUG
- DO NOT USE DAMAGED EXTENSION CORDS
RISK OF FIRE
- DO NOT EXCEED ELECTRICAL RATINGS
NOT FOR USE WITH
- AQUARIUMS OR OTHER WATER-RELATED PRODUCTS
- GENERATORS AND POWER INVERTERS
- MEDICAL LIFE-SUPPORT PRODUCTS
FCC STATEMENT
Suppliers Declaration of ConformityModel#: SPS3102WB/37 | Jasco Products Co.0 E. Memorial Rd., Oklahoma City, OK 73114www.byjasco.com
This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modificationscould void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital. device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful. interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. lfthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
100% recyclable Paper made from 50% post consumer waste byjasco.com/recycle
|
THANK YOU FOR YOUR PURCHASE! |
||
Register your Philips productScan this code to get exclusive, web-only deals and more—or visit our website!byjasco.com/deals |
Need more accessories?For more Philips Home Power products and accessories, check outbyjasco.com/power |
Like our product?Leave us a review on Amazon.comor your favorite retailer website! Having issues and need support?Call our U.S.-based expertsMonday–Friday, 7AM–8PM CST1-844-816-0320 |
SPS3102WB_37 EnSp Manual v1.indd 112/14/20 11:54 AM
References
[xyz-ips snippet=”download-snippet”]