PHOENIX 221-0223 LiFE 1200W Ash Vacuum Cleaner User Manual
Table of Contents
PHOENIX 221-0223 LiFE 1200W Ash Vacuum Cleaner User Manual
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine: WARNING: This sign warns you of dangers to your health and indicates possible injury risks.CAUTION: This sign refers to possible hazards to the machine or other objects. NOTE: This sign highlights tips and information
SAFETY INSTRUCTIONS
The appliance is designed exclusively for private, domestic use and for the envisaged purpose. This appliance is not suitable for commercial use.
Ensure that the voltage indicated on the appliance rating label corresponds to the voltage in the mains. The appliance must always be switched off before connecting it to the power supply.
To protect against risk of electric shock, do not immerse the cord, plug or unit in water or any other liquid.
Before cleaning, storing and adding / removing components, switch off the appliance and unplug it.
Always unplug the appliance after operation.
Always unplug the appliance before cleaning.
Do not operate the appliance without supervision. If you should leave the workplace, always unplug the appliance.
The appliance can be used by people with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or instructed on how to use the device safely and understand the risks involved.
This appliance may be used by children aged 8 years and over if they have been supervised or instructed in the safe use of the appliance and are aware of the risks involved. Cleaning and maintenance is prohibited for children unless they are older than 8 years and are supervised.
Keep the appliance and its cord out of the reach of children.
Do not let children play with the appliance.
In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.WARNING: Do not allow children to play with the foil. Danger of suffocation!
Children are not allowed to use the appliance.
Periodically check the cable for damage.WARNING: Do not operate the appliance with a damaged cord. In order to avoid the risk of an electric shock, never try to repair the appliance by yourself. Bring it to the authorized service station for repair. Use only the original spare parts.CAUTION: Risk of electric shock or fire!
Do not disassemble the appliance.
Do not use additives or other components not supplied by the manufacturer.
Do not place heavy objects on the power cord and do not rotate it.
Do not repair the device yourself. Contact a qualified technician.
WARNING: Never use the appliance to absorb liquids, flammable and dangerous explosives (such as petroleum, gasoline, paint thinner, acetone), corrosive and ash burning materials, matches and cigarettes.
Do not use the appliance to absorb dust that is harmful to health.
Do not use the appliance to absorb the smoke.
Keep the appliance in a dry environment.
Do not touch the live parts of the appliance.
When using the appliance to absorb ash from a fireplace, no ash should be absorbed at temperatures above 40°C. Also, do not absorb ash or other objects that have not been completely extinguished.
Do not use the appliance unless the filter is installed! Do not use filters other than those (fire prevention filter) that the manufacturer has installed in the appliance.
Cold ash is considered to be the ash that has been allowed to cool for a long time and in which there are no pockets of embers. Before using the ash vacuum cleaner, make sure that the ash has cooled by mixing the ash with a metal tool to see if there are any pockets of fire. Cold ash does not emit recognizable heat.
The absorption of the following substances is permitted: cold ashes from fireplaces, wood stoves, ashtrays and grills.
Empty and clean the ash vacuum cleaner before and after absorption to prevent the collection of materials that could endanger the appliance.
Do not use for the separation of health-hazardous dusts (dust category M).
Absorb only ash from permitted combustible materials.
Do not use the appliance to absorb hot, burning or glowing objects.
Do not use the ash vacuum cleaner to absorb materials with a temperature higher than 40°C.
Do not use the appliance to absorb flammable substances.
Cleaning and maintenance of the appliance must not be performed by children.
PARTS IDENTIFICATION
Handle
Cover (motor cover)
On / Off power switch
Aluminum tube
Spiral hose
HEPA filter with metal mesh outer casing
HOW TO USE
Read all instructions carefully and keep them for future reference.
Remove all packing materials and keep them away from children.
After unpacking the appliance, check for possible damage. In the event of a fault or visible problem, do not use the device and contact the store where you purchased it.
It is recommended that you clean the appliance as described in the “Cleaning” section.
Ensure that the voltage indicated on the appliance rating label corresponds to the voltage in the mains.
Make sure that the appliance only plugs into a properly grounded and properly installed socket.
ASSEMBLY OF ASH VACUUM CLEANER
Unlock the locking clips that secure the cover (motor cover) and remove it.
Apply the HEPA filter with the metal outer casing to the bottom of the motor.
Attach the cover to the appliance and fasten the locking clips to secure it to the bucket.
Insert the aluminum hose into the spiral hose and insert the other end of the hose into the air inlet.
ASSEMBLY OF WHEELS AT THE BASE OF THE BUCKET
Remove the screws, the nuts and the wheels from the bag included in the package.
Turn the base of the ash vacuum cleaner upside down and place the wheels in the appropriate slots so that the two holes are aligned.
Insert the screws with the nuts into the holes and tighten them until they lock.
INSTALLATION FOR BLOWING OPERATION
Insert the tip (1) into the air outlet (4) and tighten to the left.
Insert the aluminum tube (3) into the spiral tube (2).
ASH ABSORPTION
Use only the fire prevention filter.
When the container is full or when it is difficult to absorb more dust, you must remove and clean the filter.
When using the appliance to absorb the ash from the fireplace, the temperature of the ash must be less than 40°C.
CAUTION: Do not absorb the ash if the fire has not been extinguished!
CLEANING AND MAINTENANCE
report this ad
Follow these instructions to properly and safely care for your appliance.
Always disconnect the appliance from the power supply before cleaning or assembling and wait until the appliance has cooled down completely.
Do not immerse the appliance in water or spill water directly on it as this could result in electric shock or fire. Risk of electric shock and fire!
Do not immerse the motor housing in water to clean it. Risk of electric shock and fire!
CAUTION: Do not use wire brushes or other sharp objects.
Do not use acidic or abrasive detergents.
Rinse the ash container with clean water after use and dry it with a dry cloth.
Remove the filter, clean it, wash it carefully and then let it dry before reinserting it in the vacuum cleaner.
NOTE: Let the filter dry well before reinstalling!
WARNING: Do not immerse the top cover with the motor in water!
STORAGE
Always unplug the power cord before storing the appliance.
Make sure the appliance is cold and dry before storage.
Always store the appliance away from children.
Always store the appliance in a safe and clean place. For the best protection of the appliance, store it in its original packaging.