polk Marine Remote Control PRC200BC Installation Guide

PRC200BC Marine Remote Control Installation and Operation Guide

Introduction

Thank you for choosing a Polk product. The PRC200BC marine remote control allows the convenient operation of compatible Polk marine source units. Operation includes power on/off, volume adjustment, mode selection, and basic functions of available sources such as AM/FM tuner, Weather Band, Bluetooth, USB, iPod/iPhone, and SiriusXM satellite radio.

Up to three Polk marine remote controls (PRC100BC and/or PRC200BC) can be connected to a compatible Polk marine source unit by using a remote control Y-cable (Part #: PRCYC1, sold separately). One Y-cable is required for each additional remote control (e.g.: One Y-cable for two remote controls total, two Y-cables for three remote controls total.)

Installation

  1. Choose a smooth, flat, sturdy mounting location that has been verified safe. Also, verify there is enough room to route the connection cable to the source unit. Important: Do not choose a mounting location where the remote control can become submerged.
  2. Carefully cut a 1.63 diameter hole in the chosen mounting surface. A mounting template is supplied on the last page.
  3.  Route the supplied 18 extension cable from remote control to source unit making sure the correct sex of plugs is in the correct direction.Connect the extension cable to the source unit and remote control.If a longer cable length is needed or additional remote controls are added, up to two additional 18 extension cables (Part #: PRCEC18, sold separately) can be connected for a total of 54 .Important: Ensure that the route between the source unit and remote control does not have any sharp, abrasive edges, excessively tight bends or areas that can pinch the extension cable as this can negatively affect performance and/or cause damage to connected devices.
  4. Insert the remote control into the hole from the front of the mounting surface, align the face to the desired position, and secure to the mounting surface using #6 stainless steel pan head screws with a minimum length of 3/4 (not included) as detailed in Figure A.

Operation

Main Buttons

Control Action Standby Radio USB iPod AUX Bluetooth SiriusXM WeatherBand
Press Turn System On TurnSystem to Standby mode TurnSystem to Standby mode TurnSystem to Standby mode TurnSystem to Standby mode TurnSystem to Standby mode TurnSystem to Standby mode TurnSystem to Standby mode
Press Volume Increase Volume Increase. Directory search mode: navigate up the list. Volume Increase. Directory ry searchmode: navigateup the list. Volume Increase Volume Increase Volume Increase Volume Increase
I laid MENU State : Select UP items. PressENTER button to select a different item. Press ENTER again to make selection. MENU State : SelectUP items. PressENTER button to select a different item. Press ENTER again to make selection. MENU State : SelectUP items. PressENTER button to select a dtferent item. Press ENTER again to make selection. MENU State : Select UP items. PressENTER button to SVOCI a different item. Press ENTER again to make selection. MENU State : Select UP kerns. PressENTER button to select a different item. Press ENTER again to make selection. MENU State : SelectUP items. PressENTER button to select a different kern. Press ENTER again to makeselection. MENU State : SelectUP kerns. PressENTER button to select a different dent Press ENTER spin to make selection.
Press Volume Decrease Volume Decrease.searchmode: navigate down the list Volume Decrease. Directory ry searchmode:navigatedown thelist. Volume Decrease Volume Decrease Volume Decrease Volume Decrease
Hold MENU State : Select DOWN items. Press ENTER button to select a different item. Press ENTER again to makeselection. MENU Sate : Select DOWN items. Press ENTER button to select a different item. Press ENTER again to makeselection. MENU State : Select DOWN items. Press ENTER button to select a diferent item. Press ENTER again to makeselection. MENU Sate : Select DOWN items. Press ENTER button to select a different item. Press ENTER again to makeselection. MENU State : Select DOWN items. Press ENTER button to select a different item. Press ENTER again to makeselection. MENU State : Select DOWN items. Press ENTER button to select a different item. Press ENTER again to makeselection. MENU State : Select DOWN items. Press ENTER button to select a different tern. Press ENTER again to makeselection.

Play / Pause

Press Mute Play / Pause Play / Pause Mute Play / Pause Mute Mute

Enter

Press Enter Enter Enter Enter Enter Enter Enter
 

 

Menu

Press AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection. AUDIO MENU: Press the button to changethedisplayed information: Bass > Treble > Balance > Fader. Then pressENTER to make a selection. AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection. AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection. AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection. AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection. AUDIOMENU:Press the button to change thedisplayed information: Bass >Treble > Balance > Fader. Then pressENTER to make a selection.
Hold Enters the System Menu.

Mode

Press Press the MODE button to display available modes including Radio, iPod, USB, BT, SiriusXM (SXM), Auxiliary (Aux), and Weather Band (WB)

Soft Buttons

Mode User InterfacePage Key 1 Key 2 Key 3 Key 4
Radio Default TuneEnter tune page BandToggle betweenAM/FM (RBDS) PSETEnter preset page ReturnReturn to thedefault page
Tune I<<Press: tune downHold: tune seek down >>1Press: tuneupHold: tune seek up ReturnReturn to thedefault page
PSET ASAuto-scan and storestrongest stations inpreset list PSScan stations storedin the current preset list LISTDisplay the preset list ReturnReturn to thedefault page
PSET List SAVESave currently tunedstation to highlightedpreset location ReturnReturn to thedefault page
PTY ReturnReturn to thedefault page
Mode User Interface

Page

Key 1 Key 2 Key 3 Key 4
USB / IPod Default 1,4‹

Press: previous track

Hold: Rewind

»1

Press: next track

Hold: Fast4onvard

RRI

Enter RRI (Repeat.

Random. Intro) page

LIST

Browse files/folders in

the device

RRI RPT

Toggle repeat

function

RNLI

Toggle random

function

INT

Toggle intro function

(USB only)

Return

Return to the

default page

LIST BACK

Reverse navigate to

previous level

directory

Return

Return to the

default page

Bluetooth Default I” Previous track »I Next track 101 Connect I disconnect device INFO Display device name
SiriusXM Default p« Press: tune down Hold: fast tune down »I Press: tuneup Hold: fast tune up PET Enter preset page INFO

Display information:

NAME (artist) >

SONG (title) > INFO

(content. if available)

> CAT (Category)

PSET PS Scan stations stored in preset list LIST Display the preset list Return Return to the default page
PSET List SAVE

Save currently tuned station to a highlighted preset location

INFO

Display information:

NAME (artist) >

SONG (title) > INFO

(content, if available)

> CAT (Category)

Return

Return to the

default page

WeatherBand Default !«  Tune to previous station

>I Tune to nextstation

Remark: Maximum Operation Temperature: 65℃

www.asaelectronlcs.comv.062713© C2013

[xyz-ips snippet=”download-snippet”]


Posted

in

by