POLSEN M0-CPL2 Lavalier Microphone User Guide

POLSEN M0-CPL2 Lavalier Microphone User Guide

MO-CPL2

THANK YOU FOR CHOOSING POLSEN.The MO-CPL2 lavalier microphone is compatible with smartphones, tablets, and computers that have a USB Type-C™ connector. This microphone delivers rich and detailed audio that’s much better than the built-in microphone on a mobile device or computer, and it will enhance the production value of podcasts, interviews, and videos.

The microphone features an in-line A/D converter that’s capable of recording audio with sample rates up to 16 bits and 44.1 kHz. The microphone’s omnidirectional polar pattern provides excellent off-axis response, even if a subject turns their head while speaking. It also boasts a wide frequency response and high sensitivity for superb audio quality for all your projects.

 

PRECAUTIONS

  • Please read and follow these instructions, and keep this manual in a safe place.
  • Keep this product away from water and any flammable gases or liquids.
  • Do not attempt to disassemble or repair this product.
  • Make sure that this product is intact and that there are no missing parts.
  • All images are for illustrative purposes only.

 

OVERVIEW

  1. Tie clip
  2. Omnidirectional mic capsule
  3. LED indicator
  4. A/D converter
  5. Headphone jack
  6. USB Type-C connector

Also included:

  • Foam windscreen
  • Carry pouch

 

RECORDING INSTRUCTIONS

Important! The MO-CPL2 is disabled when an incoming phone call is received. To ensure your recording is not interrupted by a phone call, enable Airplane Mode in your phone’s settings.

  1. Plug the USB-C connector into your mobile device or computer. The LED indicator on the A/D converter will blink to confirm that it’s connected and receiving power.
  2. Plug your headphones into the headphone jack.Note: The headphone jack is for playback only. You cannot monitor your recording through the headphones.
  3. Place the windscreen over the mic capsule, attach the mic clip, and then attach the clip to your subject. The mic should be approximately 6 to 8 inches from the sound source.
  4. Open a compatible audio or video recording app on your device. The LED indicator on the A/D converter lights up during recording.
  5. When you’ve finished recording, press the stop button. The microphone will be disabled. Listen to the playback through the headphones.

 

RECORDING TIPS

  • For the best recording quality, the MO-CPL2 microphone should be approximately 6 to 8 inches from the sound source.
  • Always use the foam windscreen to diminish vocal plosives (e.g., the “pop” from P and B sounds) and wind noise.
  • To prevent cable tension that can move the microphone and create handling noise during recording, create a loop in the cable, and tape it to the inside of a garment.
  • If you experience excessive breath noises or inconsistent levels due to head movement, try attaching the mic upside down.

 

SPECIFICATIONS

  • Transducer Type: Electret condenser
  • Pattern: Omnidirectional
  • Frequency Response: 20 Hz to 20 kHz
  • Sensitivity: -30 dB ±3 dB at 1 kHz (0 dB=1 V/Pa)
  • Sample Rate: 16 bit, 44.1 kHz
  • Connectors: USB Type-C1/8 in. (3.5 mm) stereo
  • Power Consumption: 40 mA
  • Cable Length: 5.25 ft. (1.6 m)
  • Weight: 2.4 oz. (68 g)
  • Capsule Dimensions: Length: 0.65 in. (16.5 mm)Diameter: 0.3 in. (8 mm)
  • Compatibility:Smartphones, tablets, and computers with USB Type-C connectors

 

FREQUENCY RESPONSE

 

POLAR PATTERN

 

ONE-YEAR LIMITED WARRANTY

This Polsen product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Polsen Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Polsen along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.polsenaudio.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.www.gradusgroup.com

Polsen is a registered trademark of the Gradus Group.© 2020 Gradus Group LLC. All Rights Reserved.

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,