280ml Aroma Diffuser
Product image
SPECIFICATIONS
| Model | QMJS30 | Run time | up to 7 hours |
| Capacity | 280m1 | Coverage | up to 250 square feet |
| Adaptor Power | 100-240V,24V 0.5A |
PACKAGE INCLUDED
1 X Aroma Diffuser1 X Adaptor1 X Manual
TROUBLESHOOTING
| SYMPTOM | CAUSE | SOLUTION |
| No mist or little mist | Using distilled or purifiedwater. | Use tap water(without filter) |
| Water is exceeding the max fill line. | Clean the unit and add water 1/2 way to fill line and additional water after getting mist. | |
| The sensor/disc(inside the bottom of the water tank) needs to be cleaned. | Clean as advised with clean water.Dry with cloth or brush or swab. | |
| Tap water is too cold. | Empty tank and refill with lukewarm tap water. | |
| Leaking | Overfilled with water. | Clean the unit and add water 1/2 way to fill line and additional water after getting mist. |
| The lid(cover) is not fullycovered on the water tank. | Make sure the lid(cover) is properly in place. | |
| Blinking lights | The water level indicator is dirty. | Carefully clean the sensor/disc inside the bottom of the unit. |
| None of the examples | Get in touch with us and we will be happy to help. |
CAUTION: FOR INDOOR USE ONLYOur Porseme diffuser comes with a 12-month manufacturer warranty. Please kindly contact us before you return it to the retailer. Please contact customer service:[email protected] Our Facebook is PORSEME US.
HOW TO USE
CAUTION:
- Do not exceed the “MAX” line when adding water.
- Better use a container to add water in case water splashing into the motor.
HOW TO CLEAN
- Rinse the water tank with clean water and wipe dry with a clean cloth. Please make sure there is no any water splashing into the air outlet.
- Clean the sensor/disc with a cotton swab.
CAUTION:
MODEL SETTING
LIGHT MODE:
- The 1st time press the
to turn on the LED light, the color will change automatically. - The 2nd time presses the to fix the color.
- The 3rd to 9th time press the to change the color, our essential oil diffuser has 7 changing colors.
- The 10th time or long-press the for 3 seconds to turn off the light.
to turn on the LED light, the color will change automatically.MIST AND TIME MODE:
- The 1st time press the to turn on the spray. The initial configuration is AUTO.
- The 2nd to 4th time press the to change the timer to 1H/3H/5F1.
- The 5th time press the to turn off the spray.
to turn on the spray. The initial configuration is AUTO.PRODUCT MAINTENANCE
- Do not use with a wet hand
- Do not use detergents, solvents, or abrasive agents to clean the diffuser unit.
- Do not block the mist output or it will damage the product. * Do not remove the cover or add water/oils when in use.
- Please use on a flat surface.
- Please clean the diffuser regularly, recommend once a week.
- Please follow the advised cleaning instructions.
- Please keep away from children and pets
- Please contact us if you found any problems, we will be happy to help
Porseme US
www.amazon.com/porseme@ www.porseme.store
[email protected]
[xyz-ips snippet=”download-snippet”]