User Manual
Nintendo Switch Fusion Pro Wireless Controller User Manual
FRONT
BACK
THUMBSTICK / FACEPLATE REPLACEMENT
MAPPING PRO PACK PADDLES
NOTE: Repeat for the remaining Pro Pack paddles. Pro Pack paddle assignments will remain in memory even after disconnected.
RESETTING THE PRO PACK PADDLES
PRO PACK INSTALLATION/REMOVAL
NOTE: Store all unused components in protective case when not in use.
RECHARGEABLE 900 MAH INTERNAL BATTERY
Controller was charged at the factory, but if top LED is flashing red, plug in USB cable tocharge prior to initial pairing. Get up to 30 hours of game play when fully charged (othervariables affect play time).
NOTE: Remember to charge controller at least once every 45-60 days (regardless of use)so battery retains ability to charge. Battery capacity will gradually reduce over time withrepeated charging.
WIRELESS PAIRINGFrom the HOME Menu, select ‘Controllers,’ then ‘Change Grip and Order.’ While thefollowing screen is displayed, press and hold down the SYNC Button for at least onesecond on the controller you wish to pair.
NOTE: After controller is paired once, it will autoconnect next time.
UNDERSTANDING LED INDICATORS
- The top LED near the USB port will flash red when the internal battery is neardepletion. Plug in USB cable to charge once indicator is flashing for uninterruptedgame play. LED will turn solid red during charging, and off once fully charged.
- The front LED (between Capture and Home buttons) will flash during programming ofAdvanced Gaming Buttons.
- The four LEDs on the bottom indicate Power & player number 1-8, and will cycle fromleft to right during wireless pairing.
TROUBLESHOOTINGFor latest FAQs, visit PowerA.com/SupportPROBLEM: My FUSION Pro Wireless Controller is not pairing.SOLUTION: Confirm batteries are charged by plugging in USB-C cable.SOLUTION: Confirm you are following the ‘Wireless Pairing’ process.SOLUTION: Insert paper clip into Factory Reset Hole as marked above to reset controllerto factory settings.
BATTERY WARNING – CAUTION
- Don’t attempt to replace the rechargeable battery yourself. There is a serious risk ofexplosion if the battery is incorrectly replaced.
- The lithium-ion battery in your device should be serviced or recycled by PowerA, or anauthorized provider and must be recycled or disposed of separately from householdwaste. Dispose of batteries according to your local environment laws and guidelines.
- Disposal of a battery or a controller that contains batteries into a fire, ormechanically crushing or cutting of a battery, can result in an explosion.
- Leaving a battery or a controller that contains batteries in extremely high-temperatureenvironment can result in an explosion or leakage of flammable liquid or gas.
- A battery or controller that contains batteries that is subjected to extremely low airpressure may result in an explosion or leakage of flammable liquid or gas.
- Don’t use the rechargeable battery in a location where there is a lot of static electricity,as the internal safety functions may be damaged, causing a dangerous situation.
- In case any electrolytes get into the eyes due to battery leakage, do not rub youreyes! Instead, immediately rinse your eyes with clean running water and seekmedical attention right away.
- If the battery gives off an odor, generates heat, or in any way appears abnormalduring use, recharging or storage, immediately remove the controller from thebattery charger and place it in a secure container such as a metal box.
MOTION WARNINGPlaying video games can make your muscles, joints, skin or eyes hurt. Follow theseinstructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritationor eyestrain:
- Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don’t thinkyou need it. Parents should monitor their children for appropriate play.
- If your hands, wrists, arms or eyes become tired or sore while playing, or if you feelsymptoms such as tingling, numbness, burning or stiffness, stop and rest for severalhours before playing again.
- If you continue to have any of the above symptoms or other discomfort during orafter play, stop playing and see a doctor.
FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.
WARNING: Changes or modifications to this unit not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)This device contains licence-exempt transmitter(s)/receiver(s) that comply withInnovation, Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may causeundesired operation of the device
CONTACT/SUPPORTFor support with your authentic Power A accessories, please visit PowerA.com/Support.
MANUFACTURED BYBensussen Deutsch & Associates, LLC. (BDA, LLC.) 15525 Woodinville-Redmond Rd. NEWoodinville, WA 98072. | BDAINC.com | POWERA.com
WARRANTY2-Year Limited Warranty: Visit PowerA.com/support for details.
AUSTRALIAN WARRANTY STATEMENTThis product comes with guarantees that cannot be excluded under the AustralianConsumer Law. You are entitled to a replacement or refund for a major failure and forcompensation for any other reasonably foreseeable loss or damage. You are also entitledto have the goods repaired or replaced if the goods fail to be of acceptable quality and thefailure does not amount to a major failure. If purchased within Australia or New Zealand,this product comes with a One-year warranty from date of purchase. Defects in the productmust have appeared within One year from date of purchase, in order to claim the warranty.All warranty claims must be facilitated back through the retailer of purchase in accordancewith the retailer’s return policies and procedures. Any expenses incurred, as a result ofreturning the product to the retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTORLevel 2, 2 Darling Street South Yarra, Australia VIC 3141bluemouth.com.au Email: +61 (3) 9867 2666
ADDITIONAL LEGAL© 2021 Bensussen Deutsch & Associates, LLC. Power A, the Power A logo, and the Fusionlogo are trademarks of Bensussen Deutsch & Associates, LLC, Woodinville, WA 98072.Manufactured and distributed under license by Nintendo. Nintendo Switch is a trademarkof Nintendo. Licensed by Nintendo. Made in China.
REGIONAL COMPLIANCE SYMBOLSMore information available via web-search of each symbol name.
The WEEE (Waste of electrical and electronic equipment) symbol requires 
battery disposal outside of other household waste per local regulations.Contact your city office, waste disposal service, or retailer for guidance.
CE (Conformité Européene aka European Conformity) is a certification markthat indicates conformity with health, safety, and environmental protectionstandards for products sold within the European Economic Area.
The Regulatory Compliance Mark is a visible indication of a product’scompliance with all applicable ACMA (Australian Communications and MediaAuthority) regulatory arrangements, including all technical and recordkeepingrequirements regarding the electrical safety and/or electromagneticcompatibility (EMC).
DECLARATION OF CONFORMITYHereby, Bensussen Deutsch & Associates LLC at 15525 Woodinville-Redmond Road NE,Woodinville, WA 98072 USA, declares that this wireless controller is in compliance withDirective 2014/53/EU. The full text of the EU Declaration of Conformity is available at the
following internet address: PowerA.com/complianceWIRELESS RATING FOR EU COMPLIANCEFREQUENCY RANGE: 2.4 – 2.4835GHzMAX E.I.R.P.: < 10dBm for EUOPERATION TEMPERATURE: 10 – 45°C
2-YEAR LIMITED WARRANTYVISIT POWERA.COM/SUPPORT FOR DETAILS 
CONTENTSFUSION Pro Wireless Controller | Custom protective casePro Pack with removable paddles | Pro Pack cover | Alternate faceplateTwo extra analog sticks | 9.8ft (3m) braided USB-C cable | User guide*NOTE: The included USB cable is a dedicated (proprietary) USB cable for this FUSION Pro Wireless Controller
Read More About This Manual & Download PDF:
Nintendo Switch Fusion Pro Wireless Controller User Manual – PowerA – Nintendo Switch Fusion Pro Wireless Controller User Manual – PowerA –