POWERWORKS 2400313 60V Cordless Backpack Blower
SPACIFICATION
| Type | 2400313 |
| Voltage | 60V DC |
| AIR volume | 15.3 m³/min |
| Air speed | 225 KM/H |
| Weight (Without Battery) | 3.75 kg |
| Battery Pack | 2900413/2900513 |
| Charger | 2900313 |
| Sound pressure level | 80dB(A), k:3.0dB(A) |
| Sound power level | 98 dB(A) |
| Vibration level | <2,5m/s2, k=1.5m/s2 |
DESCRIPTION
- BLOWER TUBE
- TRIGGER
- CRUISE CONTROL LEVER
- TURBO BUTTON
- HARNESS
ASSEMBLY
UNPACKING
- Carefully remove the product and any accessories from the box.
- Inspect the product carefully to make sure no breakage or damage occurred during shipping.
- Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
- If any parts are damaged or missing, please call your Powerworks service centre for assistance.
PACKING LIST
- 60 V Backpack Blower Assembly
- Blower Tube
- Operator’s Manual
|
⚠ WARNING |
| Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. |
ASSEMBLING THE TIGGER HANDLE
|
⚠ WARNING |
| To prevent accidental starting that could cause serious personal injury, always remove the batterypack from the tool when assembling parts. |
- The flexible tube (B) is connected to the fan outlet tube (A) from the manufacturer.
- Slide trigger handle (D) on the upper blower tube (C).
- Move trigger handle to desired location before fully tightening. Use supplied screw (E) to tighten trigger handle to the blower tube.
ASSEMBLING THE BLOWER TUBE
- Before tube installation, place the hose clamp (F) around the flex tube. Clamp may need to be slightly loosened for tube installation.
- Insert the shorter end of the upper blower tube (C) assembly into the flex tube (B) at a slight angle.
- Use one end of the tube as a pivot point, and press the other side into the flex tube. This may require some force.
- Stop pressing the upper blower tube when it connects to the flex tube. Fully tighten the screws on the hose clamps once assembled. Use a screw driver (not provided) to loosen and tighten the hose clamp. Turn clockwise to tighten, and counter clockwise to loosen.
- Connect the blower tube (I) to the operating tube (C).Twist clockwise until the tubes lock into position.
- Place the cord (G) in the cord retainer (H).
TO INSTALL/REMOVE BATTERY PACK
IMPORTANT! The battery pack is not charged when it is purchased. Before using the blower for the first time, place the battery pack in the battery charger and charge.Make sure to read all safety precautions, and follow the instructions in the Battery Charger manual.
TO INSTALL BATTERY PACK
- Align the tongue of the battery pack with the cavity in the backpack housing.
- Insert the battery into the battery opening until the battery release button (J) locks into place.
- Grasp the backpack firmly.
- Push the battery pack into the backpack until both sides lock. The latch button will click when locked into place.
- Do not use force when inserting the battery pack. It should slide into place and click.
|
⚠ WARNING |
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
|
TO REMOVE BATTERY PACK
- Press and hold the battery release button with firm grip.
- Grasp the backpack firmly. Pull the battery pack out of the handle.
|
⚠ WARNING |
| The battery pack fits into the backpack snugly in order to prevent accidental dislodging. It may require a strong pull to remove it. |
|
⚠ WARNING |
| Always take care of your feet, children, or pets around you when pressing the battery release button. Serious injury could result if the battery pack falls. NEVER remove the battery pack when in a high location. |
HARNESS ADJUSTMENT
A well adjusted backpack blower and harness makes work easier. Adjust the harness to give you the best working stance. Adjust the side straps so the weight is equally distributed across your shoulders.
a. Once the blower is properly fitted on your back, pull the ends of the straps downward to tighten the harness.b. Connect the horizontal chest strap, and pull the end of the strap to tighten.c. Lift the tabs of the adjusters to loosen the straps.d. Close and lock the quick-release fastener by pushing it together.e. Squeeze the hooks to open the quick-release fastener.
PUT ON THE SHOULDER STRAP
- Adjust the harness straps (1) to the correct length.
- Adjust chest strap (2) to correct length and fasten it together.
HARNESS REMOVAL
- Open the quick-release fasteners on the strap.
- Loosen the harness straps by lifting the sliding adjusters and then take off the blower.
|
⚠ WARNING |
| The backpack blower must be quickly removed in the event of imminent danger. The chest strap must be released before putting the backpack blower on the ground. |
OPERATION
|
⚠ WARNING |
| Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. |
|
⚠ WARNING |
| Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection.Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. |
|
⚠ WARNING |
| Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. Before each use, inspect the entire product for damaged, missing, or loose parts, such as screws, nuts, bolts, caps, etc.Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. |
HOLDING THE TOOL
The operator should wear proper clothing, such as boots, safety glasses or goggles, ear/hearing protection, gloves, long pants and a long-sleeved shirt.This backpack blower is designed to be operated with one hand.The user can carry it holding the control lever with the left or right hand.Always walk slowly while working.Always check the blowing nozzle outlet area.
CHARGE BEFORE FIRST USE
|
⚠ WARNING |
| Always remove battery pack from the product when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. |
STARTING /STOPPING THE BLOWER
Before start-up, make sure that the blower is in perfect condition to guarantee safe operation.
- Squeeze the switch trigger to start.
- To change speed, press or release trigger by degrees to increase or decrease the speed.
|
⚠ WARNING |
| To avoid serious personal injury, wear goggles or safety glasses at all times when operating this unit. Wear a face mask or dust mask in dusty locations. |
|
⚠ WARNING |
| To prevent serious personal injury or damage to the unit, make sure the blower tube is in place before operating the unit. |
CRUISE CONTROL LEVER
This blower is equipped with a cruise control function.Please read and understand the function of the Cruise control lever.
- Squeeze the trigger to start the unit.
- Once the unit is on, pull the lever back clockwise to increase the speed. This will lock the speed at the desired setting.
- To decrease the speed, push the lever counter clockwise to decrease the speed to the desired setting.NOTE: If you decrease the speed all the way, the unit will shut off and step one will need to be repeated.
This blower is equipped with a turbo button. Please read and understand the function of the turbo button.
- Squeeze the switch trigger to start.
- To boost speed, press the turbo button so that the blower can be operated at the highest speed. Once the turbo button is released, the blower will be operated at the normal speed.
|
⚠ WARNING |
| To avoid serious personal injury, do not wear loose clothing or articles such as scarves, strings, chains, ties, etc., that could be drawn into the air vents. Tie back long hair to make sure it does not get drawn into the air vents |
OPERATING THE BLOWER
Ensure that the unit is not directed at anybody or any loose debris before starting the unit.
- Verify that the unit is in good working condition. Make sure the tubes and guards are in place and secure.
- To reduce the risk of hearing loss associated with sound level(s), hearing protection is required.
- Operate power equipment only at reasonable hours not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances. Usual recommendations are 9:00 am to 5:00 pm, Monday through Saturday.
- To reduce noise levels, limit the number of pieces of equipment used at any one time.
- To reduce noise levels, operate power blowers at the lowest possible speed to do the job.
- Use rakes and brooms to loosen debris before blowing.
- Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
- Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away.
AIR VENTS
Never cover air vents. Keep them free of obstructions and debris. They must always remain clear for proper motor cooling.
OPERATING THE BLOWER
Hold the blower firmly. Sweep from side to side with the nozzle several inches above the ground or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of you. Most dry blowing operations are better suited to low speeds, rather than high speeds. High speed blowing is a better way to move heavier items like large debris or gravel.
report this ad
[xyz-ips snippet=”download-snippet”]