Pro-Ject BT Box E Amplifier with Bluetooth Instructions
Table of Contents
INSTRUCTIONS FOR USEPro-Ject BT Box E
Dear music lover, thank you for purchasing a Pro-Ject Audio Systems BT Box E.In order to achieve maximum performance and reliability, you should study these instructions for use carefully.Warning of a hazard for the user, the unit or possible misuse.Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily accessible at all times. Never handle the device, the power supply while your hands are wet or damp. Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any naked flame sources, such as lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the product is disconnected from the power supply.Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.Never use any other power supply than the one supplied with the unit.Never connect or disconnect the power supply to or from the unit whilst the power supply is connected to the mains.Connection to the amplifierConnect the Analog Out socket to line input (such as AUX) on your amplifier. Alternatively, you can use also digital Optical Out to connect the unit to a D/A converter or to the digital input of your amplifier or AVR. Only one output is active at a time, use the small switch to select digital or analog output.Mains power connectionConnect the low voltage plug from the power supply to the Power 9V DC socket before connecting the power supply to the mains.
BT pairing
Pairing with devices with Android OS Open Settings and tap on BT. Turn on BT and tap on Scan. Searched devices will show up. Tap on “BT Box E” (Confirm pairing code if requested). Once paired it will show “Connected to media Audio”, now you can play music from your Android device over BT to BT Box E.Pairing with Apple devicesTap on Settings, tap on BT, turn on BT, your device will automatically start searching for available devices. Tap on “BT Box E” and it will be connected to the BT Box E. Now you can play music.It´s possible to use BT Box E also with other than the above-mentioned devices, the pairing procedure is always similar.ReconnectingIf you move out of range or turn off BT, BT Box E will disconnect from your device. To reconnect simply open the BT manager and tap on “BT Box E”. If the signal is lost for only a few seconds it can reconnect automatically – typically if you move out of the range and then return back.
Adding a new phone or tabletThe unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If you want to switch from one device to another, you have to disconnect the existing connection to BT Box E and then follow the steps for pairing with the new device.
Troubleshooting
No music from speakers:– make sure the BT Box E is powered– make sure an audio cable or an optical cable is correctly connected to BT Box E– make sure you are within the range– make sure the BT is enabled and the device is connected to BT Box E. Volume level is properly set
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.To maintain compliance with FCC´s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Contains FCC ID: 2ACCRMB05
Declaration of Conformity
We, Canor spol. s r.o. Družstevná 13925/39 08006 Prešov Slovakia (manufacturer) and Pro-Ject Audio Systems is a division of Audio Tuning GmbH Margaretenstrasse 98 1050 Vienna, Austria (distributor)
declare under our responsibility that the product is in conformity with the provisions of Directives:2014/35/EU including amendments2014/30/EU including amendments2014/53/EU including amendments
The following harmonized standards were applied:Health: EN62479:2010Safety: EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, EN62368-1:2014/A11:2017,EN61558-1:2005/A1:2009, EN61558-2-16:2009/A1:2013EMC: EN301489-1 V2.2.0: 2017-03, EN301489-17 V3.2.0:2017-03, EN55032:2015, EN55035:2017,EN61000-3-2:2014, EN61000-3-3:2013Radio Spectrum: EN300328 V2.1.1 (2016-11)Pro-Ject Audio Systems a division of Audio Tuning GmbH1050 Vienna, Austria, Margaretenstrasse 98[email protected]