PD3000BA Wireless BT Home Theater Preamplifier
Questions? Issues?We are here to help! Phone: (1) 718-535-1800 Email:
PD3000BAWireless BT Home Theater PreamplifierAudio/Video Receiver System with Multimedia Disc Player, AM/FM Radio,MP3/USB Reader (3000 Watt)
FOREWORD Your New Pyle Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. It can be used in meeting halls, house, restaurant, schools, stores or for paging systems. Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.2 www.PyleUSA.com
NOTICES AND DISC PROTECTION
NOTES ON HANDLING · The top and rear panels of the unit maybecome warm after a long period of use.This is not a malfunction. · When the unit is not in use, be sure toremove the disc and turn off the power. · If you will not use the unit for a longperiod, the unit may not functionproperly in the future. Turn ON anduse the unit occasionally. · Do not place foreign objects on the tray.
If condensation exists, the unit will not operate properly. Remove the disc, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the wall outlet and moisture condensation will seldom occur.
LOCATIONDo not locate the unit in places such as: · Near heating devices or in enclosed car. · High temperature (47°C/116.6°F or higher)or high humidity (90% or higher). · Dirty places. · Avoid direct exposure to sunlight.
ON HANDLING DISCS · Do not touch the playback side of thedisc. · Do not attach paper or tape to disc.
DISTURBANCE When you place this unit near a TV, radio or VCR the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio or VCR.NOTES ON MOISTURE CONDENSATION The pickup may be condensed with water under the following situation. · When you bring the unit directly from a cold place to a warm place. · When you use the unit in a room where you just turned on the heater, or a place where the cold air from the air conditioner directly hits the unit. · During the summer, when you use the unit in a hot and humid place just after you move the unit from an air condi tioned room. · The room is vaporous or damp.
ON CLEANING DISCS · Fingerprints and dust on the disc causepicture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.· If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. · Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl Lps. It may damage the disc.
www.PyleUSA.com 3
ON STORING DISCS· Do not store discs in a place subject to direct sunlight or near heat source. · Do not store discs in place subject to moisture and dust such as a bathroom ornear a humidifier.· Store discs vertically in a case. Stacking or placing object on discs outside ortheir case may cause warping.STRUCTURE OF DISC CONTENTS· Normally, DVD discs are divided into titles, and the titles are sub-divided intochapters. Audio CD5 are divided into tracks.
· Discs than those listed above cannot be played. · Non-standardized discs, even if they may be labeled as above cannot be played. · The performance of a recorded disc depends on the method and quality ofdisc burning. In some cases, the disc may not be played.ACCESSORIES · Audio/Video cable – 1 · Owner’s manual – 1 · Remote control – 1 · AM Antenna 1 Pc. – 1 · FM Antenna 1 Pc. – 1 · MP3 Input Cable – 1 · AC Power Cord – 1 · Rack Mounting Bracketswith Crews – 2
Each title, chapter, or track has an assigned number, which is called title number, chapter number or track number respectively. There may be discs that do not have these number.PLAYABLE DISCS AND ACCESSORIESThe following discs can be played:
FRONT PANEL AND LED FUNCTION
4 www.PyleUSA.com
www.PyleUSA.com 5
ATTENTION· Wireless BT Input mode is priority than all other audio input modes (like MP3 Player, AM/FM Tuner, DVD player, and AUX inputs). All audio inputs will not work if the button is pressed on BT mode status.· First, check if Wireless BT is switched ON or OFF. · Press BT input mode to switched ON or OFF.1. LIGHT: Light indicates signal intensity 2. MEMORY: After a station has been found, you can store the station bypressing the MEMORY button, and the screen will displays MEM above a channel number, then you can press the number knob to save the station, when the channel number displayis moving from right to left, it means the station has been saved. 3. ST/MONO: Stereo and Mono selector. 4. INPUT: This is used to select the input sources DVD/CD/USB, TUNER, IPOD/ MP3 AUX 5. MENU CONTROL: This is used to increment and decrement level for the selected function of Master Volume, Bass, Treble, Balance, Auto Station seek. 6. AM/FM: Press it to selectAM/FM when it is tuning 7. A/B SPEAKERS OUTPUT SELECTOR: Three mode: A, B, A+B 8. TUNING- / TUNING+: The two keys are used to adjust to the best signal of the stations. 9. FUNCTION DISPLAYED FLUORESCENT WINDOW 10. REMOTE SENSOR WINDOW 11. OPEN/CLOSE CONTROL: Press this key at any play mode will always turn to disc play mode 12. PLAY/PAUSE: Play and pause control 13. REV,FR: Quick/backward search the set 14. NUMBER KEYS: While in radio status, you can choose the music number directly for example choose “28”, press “10+” key twice, then press “8”, you can get “28” music or station. 15. FWD.FF: Fast forward 16. PREV, SKPR: Previous song 17. STOP: Stop control 18. NEXT, SKPF: Next song/next set 19. BT ANTENNA: Wireless BT receiver antenna for better signal. 20. BT Signal Indicator: The blue LED is off if the BT button is not pressed. The blue LED will be lit if the BT is connected. The blue LED will blink if the Wireless BT is pairing.6 www.PyleUSA.com
21. BT BUTTON SWITCH: Press BT input mode to switched ON or OFF. 22. PRESS SWITCH: Press switch to power unit ON or OFF 23. IPOD/MP3 JACKS: Connect IPOD/MP3 to these jacks 24. HEADPHONE JACKS: Connect Headphone to these jacks 25. MIC INPUT JACKS 1&2: Connect KARAOKE MIC to these jacks 28. ECHO CONTROL: Turn the knob to adjust the MIC echo level 27. MIC TREBLE: Adjusts the MIC treble 28. MIC BASS: Adjusts the MIC bass 29. MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to increasethe MIC volume 30. SUB. OUT VOLUME CONTROL 31. MASTER VOLUME CONTROL: Adjusts the volume level. Turn the knobclockwise to increase the volume 32. USB INPUT JACKS: Please note that this USB will only read MP3 files, doesnot support PWA files. In case of any damage to this unit, select PAUSE button and disconnect USB or other Input source.REAR PANEL FUNCTION1. TUNER ANT: Connect AM and FM antennas. 2. R/L OUTPUT 3. VIDEO OUTPUT, S-VIDEO OUTPUT, COMPONENT VIDEO OUTPUT: Pressthe “relevant” key on remote control to choose the output mode 4/5. DIGITAL AUDIO OUTPUT: One coaxial one optical, this output can connectthe amplifier with dolby digital or DTS decoder to play movie with correspondent records. 6. COOLING FAN 7. SUB-WOOFER OUTPUT JACKS 1&2www.PyleUSA.com 7
8. AUDIO INPUT JACKS: Connect the audio output jacks of MP3, AUX to these jacks.9. A SPEAKER OUTPUT TERMINALS: Connect your speaker system to these terminals.10. B SPEAKER OUTPUT TERMINALS: Connect your other speaker system(s) to these terminals.11. 110V/220V SWITCH: According to power voltage, push this button to the station of 110V or 220V.12. POWER CORD: Connects to AC 115V/60Hz & 230V/50Hz outlet.REMOTE DEVICE FUNCTIONRemote Control Operation 1. Remote control should be operatedwithin 6 meter and the scope of 30° in front of receiver. 2. Make sure that there is no big obstacle between remote control and machine. 3. Remote sensor should be far away from the light. High amounts of light can affect its performance.1. POWER STANDBY button Standby: Push the button to standby position, all the upper blue LED indica tors will be turned off, but all the blue LED under the knobs will still be lit.2. A/B SPEAKERS OUTPUT SELECT button 3. PAL/NTSC switch button 4. Mode VIDEO button 5. Time select button 6. Setup button 7. UP/DOWN/LEFT/RIGHT B. Play/Enter button 9. Title button 10. AM/FM button 11. Stop button 12. PLAY/PAUSE button 13. Frequency DOWN button 14. Frequency UP button 15. Language button8 www.PyleUSA.com
16. Channel L/R button17. ZOOM button18. Input selection button 19. MENU CONTROL button 20. EJECT Open/Close button21. Number button22. Mute button23. Menu button24. PBC button 25. MEMORY button 26. AUTO button
27. PROGRAM button 28. OSD display button 29. NEXT/CH+ button30. PREV/CH- button 31. USB/DVD button32. Subtitle button33. Repeat button34. A-B Repeat button 35. Volume+ button36. Volume- button
REAR PANEL CONNECTIONConnecting to Amplifier
www.PyleUSA.com 9
SAFETY INSTRUCTIONS1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.2. When more then one pair of speakers are used, (specially the main speaker output) make sure that the speakers used have the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation.3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted.4. For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause a short circuit when wires of different terminal contact each other.5. After the unit is turned ON, adjust the main volume to the desired level same with the bass and treble volume, etc.BASIC CONNECTIONConnecting to a TV with Audio/Video cable· If the TV has an S-video input, connect the DVD player with an S-video cable.When using an S-video cable, do not connect the yellow video cable.Note: The volume adjusting only works when it’s connected to a power amplifier. While it’s connected to TV set without speakers, the volume cannot be adjusted on this device. You can only adjust the volume on the TV set.10 www.PyleUSA.com
Connecting to an Audio System Connecting to an Amplifier Equipment
BASIC PLAYBACK
P· rWepheanraytoiounwsant to view a disc, turn on the TV and select the video input
connected to the unit
Basic Playback
1. Press POWER switch in the front panel to ON, the unit turns on and the TV
screen will display the start logo. If a disc is already in the tray, it will begin to
play once the power is ON.
2.
P·rTehsserOePaErNe/tCwLoOdSEiffteoreonptednistchesizdeissc. Ptrlaacye, ptlhaceedaisdciIsnc
on the disc the correct
tray. guide
on
the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the unit to malfunction.· Do not place disc which is unplayable in this unit.
3.
P·rSeossmOePdEiNsc/CmLaOySnEottopclaloysbeatchkeaduitsocmtraatyic, tahlley,pyloauybcaacnkpwreilsl sauPtLoAmYabtuictatollyn
start. to
start playback.
4. Some disc may start playback with a menu, use the cursor button on the
remote controller to select menu options and press PLAY to start, or press
digits to select a menu options directly.
www.PyleUSA.com 11
Pause/Step Playback 1. Press PAUSE/STEP first time to pause play back (still mode). The sound willbe muted during still mode. 2. Press STEP continuous to single step forward to the next frame in the video. 3. Press PLAY to resume normal playback.Previous and Next While playing, press PREV key to play back previous chapter. Press until you reach the first chapter. Each press of NEXT key while playing will skip the current chapter and play the next one.Fast Forward and Fast Reverse 1. Press FWD to fast forward through the disc. Each time the FWD button ispressed, the fast forward motion speed changes. 2. Press ENTER/PLAY to resume normal playback. 3. Press REV to fast reverse through the disc. Each time the REV button is pressed,the fast reverse motion speed changes. 4. Press ENTER/PLAY to resume normal playback.Stop Playback 1. Press STOP button to stop mode, the TV screen will show the start logo. Assome disc the unit can recall the location where it stopped such as DVD’s and audio CD’s. 2. Press PLAY to playback to resume play-back from the location where playback stopped or from the beginning of the disc. 3. Press STOP twice to stop completely.Standby Press STANDBY key on remote control to switch player to standby mode or to power ON.NOTES: 1. “INVALID KEY” may appear on the TV screen during operation. A “INVALIDKEY”means that the operation is not permitted by the unit or the disc. 2. This unit can be controlled by CPU under setting mode. While in screen saver,press any key to activate the unit. If you cannot use this function, you can set SCREEN SAVER to OFF in SYSTEM SETUP PAGE of SYSTEM SETUP.12 www.PyleUSA.com
LISTEN TO RADIO, LINE INPUT OPERATION ADVANCED PLAYBACK
· MP3, AUX EXTERNAL CONNECTION OF AUDIO SIGNAL INPUTPress INPUT key on the remote control or on the unit’s panel. The unit caninput MP3/AUX and AM/FM external connection audio signal, the display
shows the status. Audio signal of any equipment can be connected.
· INPUT TRANSFER TO MP3, AUXPress INPUT key on the remote control or on the unit’s panel. The unit caninput MP3/AUX and AM/FM external connection audio signal, the display
shows the status. Audio signal of any equipment can be connected.· LISTEN TO RADIO
FM/AM Press INPUT key to transfer the radio reception, then press [FM/AM] key on the machine or in the remote control. The machine will turn into FM/AM
NOTES: The machine will store the radio station into current channel number when the machine receives one. The effect is much related to the intensity of the signal. If there are no
mode, and the display shows the frequency and the channel number of the current radio station.
signal or immethodical signal, you’d better choose manual scan or frequency selection scan.
MANUAL SCAN Press [ FRE-] or [FRE+] key on the machine panel or on the remote control to carry out manual scan to search for your need
FREQUENCY SELECTION SCANPress [TIME] key on the remote control,the display shows the status. Then youcan input the frequency of the radiostation you want to listen to. A. FM frequency range: 87.5-108.0MHz B. AM frequency range: 530-1620KHz
AUTO SCAN Press AUTO key on the machine panel or on the remote control, then the machine itself will scan within the frequency range once completely automatically
CHANNEL SELECT Press [CH-] and [CH+] key on the remote control or on the panel, then you can select the channel you have already stored.
www.PyleUSA.com 13
NOTES: You can store your favorite
suitably adjust the antenna to a good
radio stations in continuous channels. position until you get the best reception.
MONOPHONY/STEREO MODE SELECT Press [L/R] key on the remote control to select monophony or stereo mode to listen to the radio.NOTES: We advise you to select monophony mode when the signal of the radio station you’ve chosen is not good enough.AUTO STORE RADIO STATIONS After starting AUTO SCAN function, the machine will store the radio stations received into ordinal channels. The current frequency will be stored into current channel number automatically.MANUAL STORE RADIO STATIONS Press [FRE-] or [FRE+] key to select the radio station you want to listen to, then press [MEMORY] key to store the current radio station into the channel number you want until the signal intensity is strong enough.ADVANCED PLAYBACK TIPS: If the reception is not good or there’s noise and it doesn’t become better even after changing into monophony mode, you should
USB READER FUNCTION The machine will play USB the same as disks when there is only a single form of playable file in the USB disk or in the triple card.MP3 and WMA files have the priority cover others to be played after the machine has scanned if the USB disk contains several forms of playable files.USB/DVD When the device is playing DVD, you can press [USB/DVD] key, then the screen will display READ USB after pressing [ENTER] key to turn to USB status. The same when playing USB and you can change into DVD status by following above operation.USB COPY SUBTITLE KEY FUNCTION You can insert USB equipment when the machine is playing MP3 ,CD or MPEG4. Documents will be copied into the USB after you press [SUBTITLE] key on the remote control.1. When playing MP3 disk, press [SUBTITLE] key to copy the files into the USB.2. When playing CD disk, press [SUB TITLE] key to copy the songs into USB then change them into MP3 file. (select single file or all files to transfer)NOTES: It only works when the USB equipment’s capacity is large enough. Some styles of the machine don’t have the function.
14 www.PyleUSA.com
WIRELESS BT CONNECTIVITY· Built-in BT Receiver for Wireless Music Streaming · Works with All of Today’s Latest Devices(Smartphones, Tablets, Laptops, Computers, etc.)· Wireless BT Network Name: PYLE · Wireless BT Version: 3.0 · Wireless Range: Up to 35′ ft.IMPORTANT NOTE: THE FOLLOWING FUNCTION DESCRIPTIONS ARE FOR DVDS. OPERATION AND DISPLAY ON SCREEN MAY BE DIFFERENT FOR OTHER DISC FORMATS.TIME Once the TIME button is pressed, the screen will display massages. Use the LEFT/RIGHT cursor button to select your preference. Press ENTER/PLAY to confirm.OSD Pressing this button will display “DVD n XX/XX CH XX/XX 00:00:05 (chapterelapsed),” 1/3 ENG 5.1CH 1/4 ENG · OFF”, “DVD TT XX/XX CH XX/XX-00:00:00 (chapter remain)”, “DVD TT XX/XX CH XX/XX -00:00:00 (title elapsed)”, “DVD TT XX/XX CH XX/XX -00:00:00 (title remain)”, the sixth will cancel function.LANGUAGE Press this button on remote control to change the mode of audio. For example: [1 XX 5.1CH], “XX” indicates the language of country. (the number of language depends on disc).VIDEO In play or stop status press VIDEO key on the remote control, the device will switch its video-output Intarface: TV-RGB, P-SCAN, S-VIDEO, INTERLACE YUV.P/N Press the key to switch between NTSC, PAL and AUTOZOOM Press this button to zoom into the picture. Each time the button is pressed, the magnification level will change.www.PyleUSA.com 15
SUBTITLE 1. Press this button and the screenwill display: ” [1XX]”, “XX” indicates the language of country. (the number of language depends on disc).
VOLUME AND MUTE Press “+” at the right of the VOLUMEto increase volume, “-” to decrease volume. The first press is MUTE whichwill display Mute no voice, the secondpress will return to normal.
PROGRAM Press this key can store your favorite picture as starting frame. If you have chosen several pictures, the latest picture willbe the starting frame. You can cancel it by pressing [SETUP], then press [ENTER] key after selecting [RESTORE] key of [LOGO SELECT] under system settings and the system will restore to the original frame.TITLE/PBC For DVD discs – Press this button to display the title menu. Press the digits to select your preferred chapter. For SVCD and VCD – Follow the menu instructions on screen. Press the digits during PBC playback.A/B SPEAKERS OUTPUT SELECTREPEAT Press once to repeating CHAPTER. Press twice to repeat TITLE. Press thrice to repeat ALL. Press 4 times to cancel the repeat.A-B REPEAT Press A-B to begin start-point, press again to set an end point and complete setting. The selected section A-B will be repeated. The third press will cancel this function.
MENU This is used to increment and decrement level for the selected function of Master Volume, Bass, Treble, Balance, Auto Station seek. By pressing MENU key you can select the functions above. If you want to adjust bass, press MENU key to select bass, then press (master volume+) or (master volume-) on the remote control you can increase or decrease bass. If you want to adjust treble, press MENU key to select treble, then press (master volume+) or (master volume-) on the remote control you can increase or decrease treble. Others function above can also be adjusted in the same way.SPECIAL FUNCTION PLAYBACKJPEG DISC PLAYBACK When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession. In the menu, use UP or DOWN cursor button to select a file, then press “ENTER/PLAY” to be played as a slideshow. Press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the current picture for viewing, press ENTER/PLAY, to return to normal playing.
16 www.PyleUSA.com
Press ZOOM to start zoom function, when ZOOM function is on, press PREV or NEXT to switch between pictures. Pressing the CURSOR key can move the enlarged picture and the picture display direction can be changed by pressing “PROG” key, including RANDOM, WIPER L, WIPER R, UP-DOWN, LEFT-RIGHT, WINDOW V, EDGE TO CENTER, etc.MP3 PLAYBACK Place MP3 disc on the disc tray, the DVD player will begin to play once. Simultaneously, a navigation menu will be displayed automatically if the disc is loaded In succession. In the menu, use UP or DOWN cursor button to choose folder. Press “ENTER/PLAY” button to confirm. ln the folder, use the UP or DOWN button to select the file, then press “ENTER/PLAY” to play this file. In this page, using the LEFT cursor button will return to the previous menu. Press PREV or NEXT to go back to the previous or next page.MPEG-4 DISC FUNCTION INTRODUCTION MPEG-4 is the forth video and audio encoding standard released by MPEG (The abbreviation of “Moving Pictures Experts Group”).VCD is based on MPEG-1 technology and DVD is based on MPEG-2. MPEG-4 takes advantage of narrow bandwidth, pursuing the best picture quality by compressing and transmitting the data in frame reconstructed technology. The audio data Is compressed by WMA standard. MPEG-4 is the most advanced compression technology standard in AV field. It has the highest compression rate. By MPEG-4 technology, we can encode and compress a DVD film into one or two CD-R disc with pretty good picture quality, or can burn several films that has same quality as VCD into one CD-R disc, or burn several films that has similar quality to DVD into DVD-ROM disc.Note: 1. The MPEG-4 discs available in the market now have many different formats,such as Xvid, AVI, RM etc. But some discs with “MPEG-4” logo in market are not encoded by MPEG technology. It is normal that some of the disc cannot function properly in this player because of the incorrect encoding standard.www.PyleUSA.com 17
2. The MPEG-4 files are displayed as a list in the screen, choose the icon using the cursors and press “ENTER/PLAY’ button to playback the movie.3. As AVI is the MPEG-4 format, and MPEG is MPEG-1 format, please do not combine AVI and MP3/JPEG together into a disc. The player will only recognise MP3 or JPEG in that instance. However MP3 and JPEG can be included into one disc together.Playback (Normal) When a Kodak Picture CD is inserted into the unit, an automatic slide show is launched. Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. Some slide-show transition modes are provided, use “PROG” key to select. You can set transition effects for each picture. To display an image indefinitely, press the “PAUSE” key. To view the next or previous picture, press “NEXT” or “PREV” key. To resume the slide show, press the “ENTER/PLAY” key.Image Rotation There are four modes to rotate a picture: “Invert”, “Mirror”, Left”, and “Right”. These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed. The arrow key is used to select the different rotation modes:ZOOM The “ZOOM” key is used to turn on or off this function. When this mode is on, any picture will be displayed at the last ratio selected by the user. A message on the screen will Indicate the current zoom ratio. If zoom mode is on, “ZOOM” key are used to control the ratio of zoom in/out. With ZOOM mode off, a picture is scaled to fit the whole TV screen.Notes: During zoom function, slide-show transition and image rotation are disabled. To cancel the zoom function press the “ZOOM” key again to resume the slideshow.IMPORTANT NOTE: Quality of pictures displayed on the screen is highly dependent on the viewing device.18 www.PyleUSA.com
USB 2.0 USB 2.0 allows data transfers of 480 Mb/s.Divx and Xvid Video Compatibility 1. Plays most version of DivX and Xvid Video with standard playback of DivX andXvid media files. 2. File Extensions: .avi and .divx (these must be used for the player to recorgnizeDivX video files). Note that all files with the .avi extension are recognized as Mp4, but not all of these are necessarily DivX video files and therefore may not be playable on this player.PC-Created Disc Compatibility Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed infonmalion. Discs recorded in packet write mode (UDF format) are not compatible with this player. Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.SYSTEM SETUP · When you press SETUP button on the remote control, the setup menu will bedisplayed. It will include “SYSTEM SETUP”, “LANGUAGE SETUP”, “AUDIO SETUP”, “VIDEO SETUP”, “SPEAKER SETUP”, ‘DIGITAL SETUP”. 1. Within the setup menu, you can use UP, DOWN, LEFT and RIGHT buttons on the remote control to move the cursor, and then press ENTER/PLAY button to make your selection. Press LEFT to return to the previous menu. 2. To exit setup menu, you can select the exit setup menu or press SETUP button.1. SYSTEM SETUP PAGE Setup TV screen format, video type and all DVD functions.1.1 TV SYSTEM TV SYSTEM: This player supports different TV output, including AUTO, NTSC, and PAL systems.www.PyleUSA.com 19
· If your TV supports only NTSC or PALand had you inadvertently selected the wrong TV system, theTV screen will flicker and only black and white colours will be display. In this case, you should press the SETUP button to set as following Note.Note: How to Sat the TV Type?· You may switch the NTSC/PAL settingof the DVD player to match the video signal of your TV.· The table below shows what kindsof disc are compatible with each setting (AUTO, PAL and NTSC)1.2 AUTO PLAY
1.5 TV TYPE The TV TYPE will select the different ratio of display format and TV screen. There are various types of display on screen for different matches between Disc and TV (Please see Multi-image ratio mode page).Note: · No matter which display format is selected, a picture recorded in standard 4:3 format always displays in 4:3 aspect ratio. · The display format of DVD titles may vary; please refer to the information that accompanies your specific DVD title. · lf the DVD title is recorded in16:9 wide display format while the TV is a standard 4:3 screen, horizontal compression of the image will result. · Some DVD titles may be recorded in special formats. In such cases, the DVD titles will always appear on the screen in their original format, regardless of which TV display format you select.
1.3 HD OUTPUT
1.4 VIDEO VIDEO: Sets the video output.
1.6 PASSWORD PASSWORD CHANGE: you can change the password, please type 4 numerals as new password. The initial password is 0000.
20 www.PyleUSA.com
1.7 NEXTPAGE NEXT PAGE: Select sub-item of NEXT PAGE and press ENTER key to setup.
1.7-4 PREV PAGE
1.7-5 EXIT SETUP
1.7-1 DEFAULT DEFAULT: Resets to all the manufacturer’s original settings for this DVD player Press ENTER/PLAY to perform the reset.
2. LANGUAUAGE SETUP
1.7-2 SELECT LOGO DEFAULT: Resets to all the manufacturer’s original settings for this DVD player Press ENTER/PLAY to perform the reset
2.1 OSD LANGUAGE On Screen Display (OSD) language: Users can select the whole setupmenu and on screen display language.
1.7-3 RESUME RESUME: This setup can realize the memory playback. When this setup is on, the player will recall the memory where the player stopped under the circumstances of power off or withdrawing the discs. That is to say, when you replay the disc, it will be played from there it stopped last time. Noted: With this function, each disc of different formats can be memorized.
2.2 AUDIO LANG AUDIO: Sets the preferred audio language as the default when playing DVD. (If DVD support these languages)2.3 SUBTITLE LANG SUBTITLE:Sets the preferred subtitle language as the default when playing DVD.(If DVD support these languages)
www.PyleUSA.com 21
4.4 SATURATION SATURATION: Sets the video saturation.
6.1 OPMODEOP MODE: This can set the type of output and adjust audio frequency.
2.4 MENU LANG MENU LANG: Sets the preferred menu language as the default when playing DVD. (If DVD support these languages)
4. VIDEO SETUP PAGE4.1 BRIGHTNESS BRIGHTNESS: Sets the brightness level of video output.
2.5 EXIT SETUP
3.AUDIO SETUP PAGE
4.2 CONTRAST CONTRAST: Sets the contrast level of Video output
3.1 AUDIO OUTPUT AUDIO OUT: Sets the audio outputs.
4.3 HUE HUE: Sets the hue value ofthe Video.
3.2 KEY KEY: Use the Up and Down arrow button to move acroll and adjust the key.22 www.PyleUSA.com
5. SPEAKER SETUP
6.2 DYNAMIC RANGE DYNAMIC RANGE: When LINE OUT is selected, choose this setting to adjustthe line out ratio and get different effect. If adjusting to FULL, the audiosignal peak value will be the minimum; while adjusting to OFF, maxi-mum.
5.1 SPEAKER SETUP PAGE DOWN MIX MODE: sets front speakers to LT/RT STEREO, V SURR· The first 3 settings (LT/RT, STEREO, VSURR) downmix the sound Signal for 2-Speakers. This setting allows you to enjoy a surround sound effect with only two speakers. For this reason a setup for additional speakers (described in the following sections) is disabled when DOWNMIX MODE is set to these settings.6. DIGITAL SETUP PAGE
6.3 DUAL MONO DUAL MONO: If your amplifier/decoder has Dolby Digital output, you may select stereo, left mono, right mono, or mixed mono mode for your amplifier decoder.7. SOURCE SOURCE: This system will automatically read the USB if there is no playble disc loaded. Use the Source menu to select to read from either disc and USB directory.
www.PyleUSA.com 23
TROUBLESHOOTING Before calling for service, you can perfonn the checks described in the troubleshooting guide for immediate solutions.
PROBLEM
POSSIBLE REASON
TREATMENT
Can’t play MP3 player, AM/FM tuner, DVD player, Aux input, etc.Unit can not be turned on
Switched to BT modeThe power plug is not plugged in properly or isdamaged
Push the BT Button on the front panel outsideTry plugging it in again
Remote control doesn’t workNo picture
No battery or batteries are off Replace batteries
The remote control used is out of operational rangeUnit was not connected properly
Use it with right range Connect again
Unit was not set up properly Check setup instructions
Disc cannot be played
Disc error loader doesn’t close tray
Label side should be up Reload disc in tray
No disc in tray
Put disc in tray
No sound
Unit not connected properly Volume too low
Connect it again Adjust volume
Poor picture quality and audioDisplay correctly but no response Without response
Disc dirty Disc scratched Disc warped Operation is wrong Main unit is jammed
Clean the disc Replace Disc Disc warped Renew operationReset
24 www.PyleUSA.com
DVD SPECIAL FUNCTION SETTING THE TV SCREEN SIZE Multi-aspect ratio suit to different TV screen size.Functions Supported by DVD discs There are many functions available on DVD discs and the functions vary per player and per manufacturerwww.PyleUSA.com 25
Features:· Audio + Video Home Theater System · Built-in Wireless BT Audio Streaming · Connects to TVs Soundbars Speaker Systems · Powers up to (4) Loud Speakers · Front Loading CD/DVD Player · 4-Channel Receiver System · Front Panel Control Center with Digital LCD Display · AM/FM Radio with 50 Station Memory Presets · MP3 Digital Audio File Playback · SD Memory Card & USB Flash Drive Readers · Aux (3.5mm) Input Jack · (4) Pair Speaker Terminal Binding Posts · (2) Pair RCA (L/R) Audio Inputs · Subwoofer RCA (L/R) Output · Optical (Digital) Audio Output · (2) 1/4” Microphone Inputs · 1/4” Headphone Jack · Video Outputs: S-Video RCA YPbPr (Component Video) · Output dB (Decibel) Level LED Display · Mic Echo Treble Bass Volume Subwoofer Controls · Built-in Ventilation Cooling Fan · Rack Mountable System26 www.PyleUSA.com
What’s in the Box:· Preamplifier Receiver · Remote Control · Detachable Rack Mount Brackets · RCA Connection Cable · AM + FM Antennas · Power CableTechnical Specs:· MAX Output Power: 3000 Watt · 300 Watts x 2 @ 8 Ohm · 550 Watts x 2 @ 4 Ohm · 800 Watts x 2 @ 2 Ohm · Impedance: 8 Ohm · Aspect Ratio: 4:3/16:9 · Video System: PAL/NTSC · Audio S/N Ratio: >90dB · Frequency Range: +/-14 dB · Integrated IC Radio Tuner · CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RW/MP4 · Battery Operated Remote Control, Requires (2) x `AAA’ Batteries, Not Included · Power Cable Length: 4.9′ ft. · Power Supply: 110/220 Volt Switchable · Dimensions (L x W x H): 16.9” x 14.6” x 5.7” -inchesThis product can expose you to a chemical or group of chemicals, which may include “Lead (Pb)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.www.PyleUSA.com 27
References
[xyz-ips snippet=”download-snippet”]