pyleusa.comPTA4Compact Wireless BT 2-ChannelMini Stereo Power Amplifier2 x 120 Watt with AUX, CD & Mic InputsUser Manual
IMPORTANT SAFETY INSTRUCTIONS
- Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
- Retain Instructions: The safety and operating instructions should be retained for future reference.
- Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
- Follow Instructions: All operating and user instructions should be followed.
- Water and Moisture: The appliance should not be used near water -for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or a wet
- Ventilation: The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed sofa rug, or a similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
- Heat: The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
- Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
- Grounding or Polarization: Precaution should be taken to ensure that the grounding or polarization means of an appliance is not defeated.
- Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.
- Cleaning: The appliance should be cleaned only as recommended by the
- Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact might be fatal.
- Non-Use Periods: The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for a long period of time.
- Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
- Carts and Stands: If the appliance is used with a cart or stand, the cart or stand should be a type recommended by the manufacturer. An appliance and cart combination should be moved with care.Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
- Mounting: The appliance should be mounted only as recommended by the manufacturer.
- Damage Requiring Service: The appliance should be serviced by qualied service personnel when:A. The power supply cord or plug has been damaged.B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.C. The appliance has been exposed to rain.D.The appliance has been dropped, or the enclosure damaged.E. The appliance does not appear to operate normally or exhibits a marked change in
- Servicing: The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified personnel.
- Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
- Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
- Safety Check: Upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition.
YOUR NEW PYLE PRO PTA4 STEREO POWER AMPLIFIER
Gives you the power and versatility you need in a professional sound system.Its wide frequency response makes it suitable for amplifying music or vocal program material. The front located 3.5mm jack allows you to connect the input of various MP3 devices conveniently, and the MIC PAGER/MIXING function offers the flexibility of using it at paging or musical events. It can be used for meeting halls, houses, restaurants, schools, stores, live bands, or offices.
FEATURES AND CONTROLS
- Blue LED Output Level Display
- Power On/Off and LED Indicator: Main power switch, the indicator lights when the amplifier is turned on.
- CD/MP3 3.5mm AUX Input Jack (FRONT): This Lets you easily connect the computerized MP3 Device (player) sources,such as PC (CD ROM), Laptop, Walkman, iPod, and Cell Phone.
- 1/4″ PHONE Jack Accepts headphones with 1/4″ plug.
- MIC Volume Control: This lets you adjust the volume of the connected MIC to the proper setting.
- MASTER Volume Control: Let’s you control the overall volume level.It doesn’t affect the volume of MIC.
- BALANCE Control: This lets you adjust the sound balance between the left and right of amplifier outputs.
- BASS and TREBLE Controls: This allows you to boost or attenuate bass and treble for the desired sound.
- AUX1/AUX2/CD/AUX/BT: This lets you select the desired input music source.
- Wireless ST Antenna
- AUX 1/AUX 2/CD RCA Inputs: This lets you connect most high-level audio sources such as CD player, tape deck, tuner, camcorder, or VCR.
- REC RCA Output: This Lets you connect the amplifier to a tape deck for recording.
- Push Type Speaker Terminal: This Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel at stereo mode.
- Replaceable Power Fuse: The amplifier uses a fuse for protection against surges and short circuits. If the amplifier suddenly turns off and will not turn on, check the fuse and if necessary replace it with a 1.5-amp, 250-volt, fast-acting, 5x20mm fuse (not supplied).
- 110/220 Voltage Selector: This amplifier has selectable input voltage from 110V/60Hz (the standard in the USA and CANADA) to 220V/50Hz (for EUROPEAN operation). Please make sure the switch is in the proper position before operating, otherwise, the severe damage will be incurred and not covered by the warranty.
- 1/4″ MIC Input Jack: Lets you connect a microphone with a 1/4–
- Switchable MIC PAGER and MIXING Modes: Set to PAGER, the signal from AUX 1/AUX 2/CD will be attenuated BY -12dB and the signal from MIC will override to page (Auto Talkover), it is good for paging system. Set to MIXING, the signals from AUX 1/AUX 2/CD and MIC will exist at the same time, it acts like playing at the KARAOKE event.
WIRELESS BT STREAMING CONNECTIVITY:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Wireless BT Streaming Devices (iPhone, Android, Smartphone, iPad Tablet PC,)
- Wireless BT Network Name:’PYLEUSA’ or ‘131″
- Wireless BT Version: 5.1
- Wireless Range: Up to 30’i- ft.
CONNECTION DIAGRAM
Features:
- Wireless BT Audio Streaming Receiver
- 2-Channel Amplifier System
- Front Panel Button Control Center
- RCA REC Output
- 1/4″ MIC Input Jack
- 1/4″ Headphone Jack
- Power On LED Indicator
- Blue LED Output Level Display
- 5mm Aux CD/MP3 Input Jack
- Switchable MIC Pager & Mixing Modes
- Four Push Type Speaker UR Terminals
- Switchable AUX1/AUX2/CD and RCA Input
- Bass, Treble, Balance, Master & Mic Volume Controls
- Convenient Audio Source Control for Home or Office Use
What’s in the Box:
- Audio Amplifier RCA Cable
Technical Specs:
- Power Output 2 x 120 Watt
- Amplifier Design: 2-Channel
- Impedance:4-8 Ohms
- Frequency Response: 20Hz – 20KHz
- Signal to Noise Ratio: >81dB
- H.D.: <0.3%
- Headphone Jack, ye
- Digital File-type Compatibility: MP3, WMA
- Maximum USB/SD Flash Support: Up to 64GB
- Power Cable Length: 42 ft.
- Power Supply: 120/240V, Switchable
- Dimensions (L xW x H):39’x 8.2r x 2.7T-inches
report this ad
This product can expose you to a chemical or group of chemicals, which may include ”Nickel Carbonate and Lead(Pb)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm.For more info, go to https://www.p65warnings.ca.gov/.
Specifications are typical; individual units might vary.Specifications are subject to change and improvement without notice.pyleusa.com
VISIT US ONLINE:Have a question?Need service or repair?Want to leave a comment?PyIeUSA.com/ContactUs
Questions? Issues?We are here to help!Phone: (1) 718-535-1800Email: [email protected]
References
[xyz-ips snippet=”download-snippet”]