PYLE UHF Wireless Microphone User Manual

Table of Contents

Wireless Transmitter with Universal Plug-and-Play Audio

UHF all-purpose wireless microphone is suitable to all kinds of audio equipment as much as PA system.

The standard 3.5mm plug convertable to 6.5mm plug is very convenient. Stable signals, sounds loud and clear.

Switch Order: Dial the switch of the receiver to ON, then dial the switch of headset microphone to ON.
Frequency conversion/frequency conversion steps:A. Automatic Frequency: When the receiver and microphone are turned ON, the reception indicator (blue) changes from flashing to constant light, and the head- mounted emission indicator (red) changes from flashing to constant light.B. Manual frequency conversion: Keep the receiver and wore a transmitter in the open, and let the receiver light with the launch of the lamp head 15 cm distance corresponding to each other, and then press and hold M button on the transmitter for three seconds, receiver light’s blue and launch the red light flashing began to sweep at the same time, when the lights stop flashing and stays on, the frequency conversion succeed. Press M mode button of transmitter one time to change frequency.
Charging: When the receiver is charging using the charger, the charging indicator light is bright red; When the charging is complete, the indicator lights off.
Volume Adjustment: the default volume of power ON is 5 level (medium volume), adjust V+ to increase the volume and V- to decrease. The volume level is not saved. The default volume is turned ON.

Convenient Microphone Voice-Over
Already Paired Device before Using
Simple Plug-and-Play Operation
Integrated Low Noise Circuitry
Noise-Eliminating SMT Technology
Crisp Audio Clarity for Vocals & Singing
Connect & Stream Audio to External Devices
1/4” -inch (6.3mm) Wired Microphone Input
Rear Panel 1/4” -inch (6.3mm) Unbalanced Mixed Output
Rear Panel Aux (3.5mm) Audio Input/ Output Jacks Perfect for Professional Audio Stage & Studio Performances