USER MANUAL FOR GAMING HEADSETSYSTEM MODEL RZ04-0269, CONTAINTSGaming Headset MODEL RC30-026901 ANDWIRELESS USB TRANSCEIVER RC30-026902
PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
- Gaming Headset (System model RZ04-0269, contains Gaming Headset model RC30- 0268901 and USB WIRELESS TRANSCEIVER RC30-026902)
- WIRELESS USB TRANSCEIVER
- Charging cable
- Important Product Information Guide
SYSTEM REQUIREMENTS
HARDWARE REQUIREMENTS
- Devices with a USB port
RAZER SYNAPSE 3 REQUIREMENTS
- Windows® 7 64-bit (or higher)
- Internet connection
- 500 MB of free hard disk space
REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your product online at razerid.razer.com/warranty to get real-time information on your product’s warranty status.If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of Razer benefits.
Your product’s serial number can be found underneath the ear cushion, as shown here.
TECHNICAL SUPPORT
- 1 year limited manufacturer’s warranty
- Free online technical support at support.razer.com
DEVICE LAYOUT
A. Auto-adjusting headbandB. Leatherette ear cushionsC. Flip microphoneD. Charging portE. Power buttonF. Status indicatorG. Volume controlH. USB wireless transceiverI. Charging cable
SETTING UP YOUR RAZER NARI ESSENTIAL
CHARGING YOUR HEADSET
Connect your Razer Nari Essential to a powered USB port using the charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted unit will fully charge in about 4 hours.UNDERSTANDING THE CHARGING NOTIFICATIONSYour Razer Nari Essential will send out notifications depending on its current charging status, as shown here:
CONNECTING TO YOUR PC
- Plug the USB wireless transceiver to your PC.
- Right-click on the sound icon on the system tray, and then select Sounds.
- On the Playback tab, select Razer Nari Essential from the list, and then set it as the Default Device.
- In the Recording tab, select Razer Nari Essential from the list and click the ‘Set Default’ button.
CONNECTING TO OTHER DEVICES
- Plug the USB wireless transceiver to your device and make sure your Razer Nari Essential is the default input and output audio device.
CONNECTING TO YOUR HEADSET
- Power on your headset by holding the power button for at least 3 seconds or until you hear 2 short beeps.
- Wait until the status indicator is static blue.Note: Keep your headset within close proximity of the USB wireless transceiver for a faster and more stable connection. If your headset fails to connect, it will automatically power off after a few minutes.
Note: Keep your headset within close proximity of the USB wireless transceiver for a faster and more stable connection. If your headset fails to connect, it will automatically power off after a few minutes.
USING YOUR RAZER NARI ESSENTIAL
USING THE VOLUME CONTROL
Rotate the volume control to increase or decrease the volume.
USING THE FLIP MICROPHONE
To enable the mic, pull it down until you feel a click and push it up until you feel the same click to disable the mic.
Bend the mic until it is parallel to your mouth, then adjust the length as preferred. Make sure the mic diaphragm is in front and the air vent is facing away from your mouth.
EXTENDING YOUR HEADSET’S LIFESPAN
We recommend stretching the headset gently apart before placing them over your head to minimize headband stress. However, please avoid overstretching the headset beyond its technical limits.
INSTALLING RAZER SYNAPSE 3 FOR YOUR RAZER NARI ESSENTIAL
Step 1: Make sure your Razer device is connected to the USB port of your computer.Step 2: Install Razer Synapse 3 when prompted* or download the installer from razer.com/synapse.Step 3: Create your Razer ID or log in using an existing account.*Applicable for Windows 8 or later.
Please refer to the Online Master Guide at support.razer.com for in-depth instructions on how to configure and use your Razer Nari Essential.
REGULATORY
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help. For more information, refer to the online help system on razer.com.
FCC CAUTION STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.
CautionAny changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
ENGLISHSTATEMENT OF COMPLIANCE WITH EU DIRECTIVEHereby, Razer (Europe) GmbH, declares that thisRazer Nari Essential (USB Wireless TransceiverRC30-026902 and Gaming Headset RC30-026901) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2012/19/EU and 2011/65/EU.
The full Declaration of Conformity can be requested via the following:Company: Razer (Europe) GmbHAddress: Essener Bogen 23, 22419 Hamburg, GermanyE-mail: [email protected]Internet address: https://www.razer.com
Gaming Headset:Radio Frequency: 2.4GHz SRDOperating Frequency: 2403.35-2477.35 MHzMax Output power: 6.32 dBm
USB WIRELESS TRANSCEIVER:Radio Frequency: 2.4GHz SRDOperating Frequency: 2403.35-2477.35 MHzMax Output power: 4.65 dBm
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Nari Essential, we suggest that you adopt the following guidelines:Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support.Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activity that requires active awareness of your surroundings.Listening to excessively loud volume over an extended period of time can damage your hearing.Furthermore, legislation of certain countries permits only a maximum sound level of 86dB for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Nari Essential requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
Canada Statement
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Razer RZ04-0269 Gaming Headset User Manual – Razer RZ04-0269 Gaming Headset User Manual –
[xyz-ips snippet=”download-snippet”]