Redmi by Xiaomi Redmi Note 8 Pro User Guide
Redmi Note 8 Pro
User Guide
Thank you for choosing Redmi Note 8 ProLong press the power button to turn on the device.Follow the on-screen instructions to configure the device.
For more information
Visit our official website: www.mi.com
MIUIRedmi Note 8 Pro comes pre-installed with MIUI, our customisedAndroid-based OS which pushes frequent updates and user-friendlyfeatures suggested by over 200 million active users worldwide. For moreinformation, please visit www.miui.com.
SIM Card Tray:
About Dual SIM:
- Dual 4G SIM requires the support of local telecom operator services, and may not be available in all regions.
- Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
- Only certain regions and telecom operators support VoLTE.
- System updates may be applied when network optimization occurs. For details, please refer to the system version in use on the device.
Correctly dispose of this product. This marking indicates that thisproduct should not be disposed with other household wastesthroughout the EU. To prevent possible harm to the environment or human health fromuncontrolled waste disposal, recycle responsibly to promote the sustainable reuseof material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
For Environment Declaration, please refer to the link below:http://www.mi.com/en/about/environment/
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage,do not listen at high volume levelsfor long periods. For more important safety information, please refer to User Manual in the link below : http://www.mi.com/en/certification/
Important safety information
- Read all the safety information below before using your device.
- Using unauthorized cables, power adapters, or batteries can cause fire,explosion, or pose other risks.
- Use only authorized accessories which are compatible with your device.This device’s operating temperature range is 0 °C~40 °C. Using this device in the environments outside of this temperature range may damage the device.
- If your device is provided with a built-in battery, don’t attempt to replace the battery yourself to avoid damaging the battery or the device.
- Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
- After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours.
- The battery must be recycled or disposed of separately from household waste.Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery and accessories according to the local regulations.
- Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately
– Do not short circuit the battery to avoid overheating, burns, or other personal injuries.
– Do not place the battery in the high-temperature environments.Overheating may cause explosion.
– Do not disassemble, hit, or crush the battery to avoid battery leaks,overheating, or explosion.
– Do not burn the battery to avoid fire or explosion.In case of deformation, stop using the battery immediately.
- Keep your device dry
- Do not try to repair the device yourself. If any part of the device does not work properly,contact Mi customer support or bring your device to an authorized repair center
- Connect other devices according to their instruction manuals. Do not connectincompatible devices to this device.
- For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall beeasily accessible.
Safety precautions
Safety precautions- Observe any law and rule which restricts using mobile phones in specific cases andenvironments.
- Do not use your phone in petrol stations and explosive atmospheres and potentiallyexplosive environments include fuelling areas, below decks on boats, fuel orchemical transfer or storage facilities, areas where the air contains chemicals orparticles, such as grain, dust, or metal powders.Obey all posted signs to turn off wireless devices such as your phone or other radioequipment. Turn off your mobile phone or wireless device when in a blasting area orin areas posted turn off “two-way radios” or “electronic devices” to avoid interferingwith blasting operations.
- Do not use your phone in the hospital operating rooms, emergency rooms, orintensive care units. Comply with the current rules and regulations of hospitals andhealth centers. Please consult your doctor and the device manufacturer todetermine if operation of your phone may interfere with the operation of yourmedical device. To avoid potential interference with the pacemaker, maintain aseparation of 15cm between the mobile phone and the pacemaker. To achieve this,use the phone on the opposite ear to your pacemaker and do not carry it in a breastpocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoidinterference with medical equipment.
- Respect aircraft safety regulations and turn off your phone on board the aircraftwhen required.
- When driving a vehicle, use your phone in accordance with the relevant traffic lawsand regulations.
- To avoid lightning strike, do not use your phone outdoors during thunderstorms.
- Do not use your phone to make calls while it is charging.
- Do not use your phones in places with high humidity such as bathrooms. Doing somay result in electric shock, injury, fire, and charger damage.
Security notice
Update your phone’s operating system using the built-in software update feature, orvisit our authorized service outlets. Updating software through other means maydamage the device or result in data loss, security issues, and other risks.
EU Regulations
RED Declaration of Conformity
Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1906G7G is in compliancewith the essential requirements and other relevant provisions of the RE Directive2014/53/EU. The full text of the EU declaration of conformity could be consulted atwww.mi.com/en/certification
RF Exposure Information (SAR)
This device is compliance with Specific Absorption Rate (SAR) for generalpopulation/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit:2.0 W/kg) specified in Council Recommendation 1999/519/EC, and ICNIRPGuidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certifiedpower level in all tested frequency bands, and placed in positions thatsimulate RF exposure in usage against the head with no separation, andnear the body with the separation of 5 mm.
SAR compliance for body operation is based on a separation distance of 5mm between the unit and the human body. Carry this device at least 5 mmaway from your body to ensure RF exposure level compliant or lower to thereported level. To support body operation, choose the belt clips orholsters, which do not contain metallic components, to maintain aseparation of 5 mm between this device and your body. RF exposurecompliance with any body accessory, which contains metal, was nottested and certified, and use such body-worn accessory should beavoided.
Legal Information
This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device is restricted to indoor use only when operating in 5150 to5350Mhz frequency range in following countries:
| AT | BE | BG | HR | CY | CZ | DK |  |
| EE | Fl | FR | DE | EL | HU | IE | |
| IT | LV | LT | LU | MT | NL | PL | |
| PT | RO | SK | SI | ES | SE | UK |
Receiver Category 2Ensure the power adapter used meets the requirements of Clause 2.5 inIEC60950-1/EN60950-1 and has been tested and approved according tonational or local standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas onlyand maximum radio-frequency power:GSM 900: 35 dBmGSM 1800: 32 dBmUMTS band 1/8: 25 dBmLTE band 1/3/7/8/20/28/38/40: 25.7 dBmBluetooth: 20 dBmWi-Fi 2.4 GHz band: 20 dBmWi-Fi 5 GHz: 5150~5250 MHz: 20 dBm, 5250~5350 MHz: 20 dBm,5470~5725 MHz: 20 dBm, 5725~5825 MHz: 14 dBmNFC: 13.56Mhz < -7.89 dBuA/m at 10 m
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.This mobile phone has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.R
F Exposure Information (SAR)
This device meets the government’s requirements for exposure to radiowaves. This device is designed and manufactured not to exceed theemission limits for exposure to radio frequency (RF) energy. The exposurestandard for wireless devices employs a unit of measurementknown as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, thisdevice has been tested and meets the FCC RF exposure guidelines for usewith an accessory that contains no metal and positions the device aminimum of 1.5 cm from the body. RF exposure compliance with anybody-worn accessory that contains metal was not tested and certified,and use of such body-worn accessory should be avoided. Accessoryavailable in market and must be used to keep use distance 1.5 cm from EUTto Body for Body-worn operation.
FCC Note
Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.
E-label
This device has an electronic label for certification information.To access it, please select Settings > About Phone > Certification or selectSettings, then type “Certification” into the search bar
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,SAR Value: Head: 0.997 W/Kg, Body: 1.466 W/Kg (5 mm distance).
Model: M1906G7G1906 indicates that this product will be launched after 201906.
Disclaimer
This User Guide is published by Xiaomi or its local affiliated company.Improvements and changes to this User Guide necessitated bytypographical errors, inaccuracies of current information, orimprovements to programs and/or equipment, may be made by Xiaomi atany time and without notice. Such changes will, however, be incorporatedinto new editions of this User Guide. All illustrations are for illustrationpurposes only and may not accurately depict the actual device.
This smartphone is designed with 
Corning® Gorilla® Glass 5.
Manufacturer: Xiaomi Communications Co., Ltd.Manufacturer postal address: The Rainbow City ofChina Resources, NO. 68, Qinghe MiddleStreet, Haidian District, Beijing, China 100085All rights reserved by Xiaomi Inc.
Brand: Redmi Model: M1906G7G
References
[xyz-ips snippet=”download-snippet”]