REHABMART Screen Capture Instruction Manual
INSTRUCTION
- Step 1: Ensure that the screws on the EKG / ECG belt are tightly closed.
- Step 2: Connect the EKG / ECG patient cable to the screws using ECG clip adaptors.
- Step 3: Connect the EKG / ECG patient cable to each of the 4 limb clamps.
- Step 4: Wet the 6 electrodes & 4 limb clamps with tap water.
- Step 5: When the patient is lying down comfortably. apply the belt on patient chest with V1 & V2 symmetrically on both sides of the sternum.
- Step 6: Apply the second strap below & then above the second arm.
- Step 7: Close the buckles over V1 & V2.
- Step 8: new way to make EKG test.
WEB: www.RehabMart.com
[xyz-ips snippet=”download-snippet”]