RENOGY Bluetooth Module for Solar Charge Controllers User Manual

Bluetooth Module for Solar Charge Controllers

General Information

The Renogy BT-1 is a great addition to any compatible Renogy solar charge controllers. Powered by its RJ12 communication port, the BT-1 provides wireless monitoring of system data and allows users to change parameters through the Renogy BT/Renogy DCHome smart phone App.

Key Features

  • Wirelessly monitor and control compatible solar charge controllers via Bluetooth
  • Connects to our user-friendly smart phone App, Renogy BT/Renogy DCHome, to keep track of your system
  • Embedded exclusive Bluetooth chip with high efficiency and low energy consumption
  • Bluetooth 4.2 and BLE technology provides fast and uninterrupted communication
  • Powered directly through RJ12 communication port
  • Signal range up to 82ft
  • Two LED lights indicate the power and Bluetooth connection condition

Identification of Parts

Operation

Connection

Connect the BT-1 Bluetooth module to any Renogy solar charge controller with an RJ12 port and RS232 communication protocol.

Communication status indicator

Green Power Indictor:

 

Power Indicator

Status Note
Solid (Green) Power On
Off Power Off

Blue Communication Indicator:

 

Link Indicator

Status Note
Flashing (Blue) Communicating
Off Stand by

Compatible Models:

Compatible Models All Renogy Controllers with RJ12 port
Communication Protocol RS232
Port Type RJ12

Technical Specifications

Description Parameter
Model BT-1
Input Voltage 12V
Standby Power Consumption 0.04W
Operating Power Consumption 0.05W
Communication Range ≤82ft
Serial Baud Rate Fixed Baud Rate 9600bps
Communication Protocol RS232
Port Type RJ12
Cable Length 5.00m (16.4ft)
Dimensions 67.3 X 35 X 14mm
2.65 X 1.38 X 0.55in
Installation Dimensions 67.3 φ3.5mm(2.66 φ 0.14in)
Operation Temperature -20℃~85℃(-4°F to 185°F)
Protection Grade IP54
Weight 130g(4.58oz)

To Download App

  1. The Android version of the Renogy BT APP is available to download on Renogy.com and the Google Play Store.In the Google Play Store, simply search “Renogy BT” or “Renogy DCHome” in App store to download.
  2. For IOS version, simply search “Renogy BT” or “Renogy DCHome”in App store to download.The admin password in App is 135790123
  3. How to Connect via BluetoothPlease ensure your device’s Bluetooth setting is turned on.Select:Configuration > Search Devices > DeviceThe green indicator on the BT-1 will turn on once it has successfully connected to the power.The blue indicator on the BT-1 will blink once it has successfully connected and during communication.

2775 E Philadelphia St, Ontario, CA 91761, USA909-287-7111www.renogy.com[email protected]

References

[xyz-ips snippet=”download-snippet”]