DRAIN HOSE INSTALLATION
WARNING |
Electrical Shock HazardDisconnect power before servicing.Replace all parts and panels before operating.Failure to do so can result in death or electrical shock. |
- Remove the rear panel. See “Rear Panel” illustration for 5 screw locations.
- Insert the molded connection end of the drain hose through the hose clamp and over the discharge port on the drain pump, as shown.
- Locate the clamp.
- To keep the drain hose from kinking, coil the excess drain hose and secure it with the cable tie.
- Re-install the rear panel.
A. Drain pump discharge portB. Hose clampC. Molded connection end of the drain hose
W11528110A©2021. All rights reserved.
[xyz-ips snippet=”download-snippet”]