Rexing H2 Trail Camera User Manual

Rexing H2 Trail CameraUSER MANUAL

Introduction
Features
  • Programmable 3, 5, 8, 12 or 16 Mega-pixel high-quality resolution.
  • Infrared night vision LEDs for flash range  as far as 65 feet.
  • In Cam + Video mode, camera takes both pictures and videos at each trigger time.
  • Impressively quick trigger time (0.2 – 0.5 second, pre boot 0.2 second)
  • Unique side Prep Sensor design provides wider sensing angle and enhances cameras’ response speed.
  • In Time Lapse setting, the camera automatically and constantly takes pictures/ videos at specified time internals. This is very  useful when observing plants flowering, birds building nest, or when monitoring unattended properties such as parking lots.
  • With Timer Setting is ON, the camera can be programmed to only work in specified period every day. This feature can work together with Time Lapse feature.
  • Programmable 3, 5, 8, 12 or 16 Mega-pixel high-quality resolution.
  • Infrared night vision LEDs for flash range  as far as 65 feet.
  • In Cam + Video mode, camera takes both pictures and videos at each trigger time.
  • Impressively quick trigger time (0.2 – 0.5 second, pre boot 0.2 second)
  • Unique side Prep Sensor design provides wider sensing angle and enhances cameras’ response speed.
  • In Time Lapse setting, the camera automatically and constantly takes pictures/ videos at specified time internals. This is very  useful when observing plants flowering, birds building nest, or when monitoring unattended properties such as parking lots.
  • With Timer Setting is ON, the camera can be programmed to only work in specified period every day. This feature can work together with Time Lapse feature.
Application
  • Trail camera for hunting.
  • Animal or event observation.
  • Motion-triggered security camera, for home, office, and community.
  • All other indoor/outdoor surveillance where invasion evidence needed.
Handling the Camera
Camera Overview

  1. UP Button
  2. RIGHT Button
  3. SHOT Button
  4. OK Button
  5. LEFT Button
  6. MENU Button
  7. REPLAY Button
  8. DOWN Button
  9. TF Slot
  10. AV Port
  11. USB Port
  12. OFF
  13. TEST
  14. ON
  15. Infrared LEDs
  16. Lens
  17. Front Motion Sensor
  18. Side Motion Sensor
  19. Display Screen
  20. DC Port
Basic Operations

Installation
Power Supply

Batteries InstallationOpen the camera by unlocking two latch first.  The battery compartment is the right part of the camera. Open the protective cover of the battery compartment and insert eight (8x) 1.5v LR6/AA batteries into the battery slots. Make sure to insert each battery with correct polarity (+ and – end) against the long spring of each battery slot.Note:

  • NEVER INSTALL DIFFERENT TYPES OF BATTERIES or NEW AND OLD BATTERIES in the product at the same time.
  • Anytime you load or unload batteries, make sure that the camera is OFF. If using external power source, do not remove internal batteries

Using an External Power SourceOptionally, you can connect an external 6V DC power source with at least 1.5A to the DC Port port at the bottom of the camera. The power connector is a 3.5×1.35 mm coaxial DC power plug with positive tip (inside pin) polarity. Leave internal batteries in the camera during use.

Inserting the SD Card

The camera uses a Micro SD (Secure Digital) memory card to save photos (in .jpg format) and/or videos (in .AVI format). SD and SDHC (High Capacity) cards up to a maximum 32GB capacity are supported. Insert the SD card (when the camera in OFF Mode) before beginning to operate the camera. (DO NOT insert or remove the SD card when the camera is in ON Mode) Before inserting a memory card, please open the front cover and make sure that the write-protect switch on the side of the card is OFF (NOT in the Lock position).

  • Insert the SD card into the card slot. A click sound indicates that the card is installed successfully. If the wrong side of the card is facing up, you will not be able to insert it without force (There is ONLY ONE correct way to insert cards).
  • To take out the SD card, just gently push in the card (do not try to pull it out without pushing in first). The card will be released  from the slot and ready to be removed when you hear the click.

Note:

  • Be sure the camera’s power is switched OFF before inserting or removing SD cards or batteries.
  • Camera cannot be operated without an SD memory card installed.
Camera Operation
Basic Operation

There are three basic operation modes:

  • OFF Mode: Power switch in the OFF position (LCD screen is off).
  • ON Mode: Power switch in the ON position (LCD screen is on).
  • TEST Mode: Power switch at TEST position.

OFF ModeThe OFF mode is the safe mode when any actions need to be taken (e.g. Replacing the SD card or batteries, or transporting the device).ON ModeThe camera will take photos or videos automatically (with its current settings) when it is triggered by the PIR sensor’s detection of activity in the area it monitors.TEST ModeIn the TEST mode, you can check and change the settings of the camera by using its built-in LCD screen. The settings in the TEST Menu will let you change the photo or video resolution, time interval between photos, switch the time imprint on, etc.

Change Setting in TEST Mode

The main purpose of the TEST mode is to allow you to change the settings of the camera so that you trail camera operates exactly the way you want it to.

  • Press the UP key, then press SHOT to take a video for a test.
  • Press the DOWN key, then press SHOT to take photo for a test.
  • Press the MENU button, the setup options will be showing on the LCD screen.
  • Press the UP or DOWN key, scroll to the next or previous parameter.
  • Press the RIGHT or LEFT key to change the setting.
  • Press the OK button to save the new setting.
  • Press the MENU button to exit the setup menu.
Photo/Video Modes

Photo: Capture photos with motion detection.Video: Capture video clips with motion detection.Photo + Video: Capture both photos and videos with motion detection.

Camera Operation
Photo Resolution

Set resolution for still photos. We recommend set the resolution to 8MP.Options: 1MP, 3MP, 5MP, 8MP, 12MP, 16MP, 20MP.

Photo Series

Selects how many photos will be taken in sequence per trigger. In addition to Single Shot Mode (1 photo), you can take 2 Photos in Series, and 10 Photos in Series.

Video Resolution

Select video resolution.Options: 20MP: 5200×3900(interpolated); 16MP: 4608×3456 (interpolated); 12MP: 4000×3000 (interpolated); 8M: 3264×2448; 5M: 2592×1944; 3M: 2048×1536; 1M: 1280×960;

Video Length

Set the length of each video clip recorded each time when motion is detected (between 3-60 seconds or 1-10 minutes). The longer the recording time selected, the shorter the operating time it will be.

Audio Recording

Opening this function, you’ll be able to record sound while recording a video.

Shot Lag

Set the time period that the camera should wait before reacting to subsequent activation of the main sensor after the initial recording. During the selected interval, the camera will not record any images or videos. This prevents the memory card from being filled up with too many recordings  of the same event. You can select between 5-60 seconds or 1-60 minutes.

Side Motion Sensors

The default setting is ON. The two side PIR sensors provide wider sensing angle and enhance response time. However, in some situations, you might have difficulties removing the interfering  twigs, or avoiding the sunlight. If so, you’ll have an option to turn off the side sensors.

Sensitive Motion Sensors

The sensitivity of the main motion sensor can be set here. For interior areas and environments with little interference, such as branches blowing in the wind, select HIGH. Select MEDIUM for exterior areas and environments with a normal amount of interference, and select LOW for environments with a high level of interference (Please note that the temperature may also affect  the sensitivity). The HIGH setting is suitable for warm ambient temperatures, whereas LOW should be selected for cold environments.

Camera Operation

Target Recording Time

Select ON if the camera should only be active during a certain period of time. In the screen menu, you can also set the Start and End time for the active phase. The settings made here apply to every day monitoring.The camera will not record any images outside of the active phase.

Time Lapse

Time lapse model disables the PIR sensor; instead, it takes photos or records video clips automatically at your choice of intervals. This has an advantage for scouting further distances that out of the PIR sensor’s range, such as big open areas or monitoring the flowering, sunrise and  sunset.When you confirm ON by clicking the OK button, you can then set the desired time interval using the menu that appears.

Camera Operation
Languages

You can set English, German, Finnish, Swedish,Danish, French, Italian, Dutch, Spanish,Portuguese, Japanese or Chinese as the menu  language.

Time & Date

You can set the date format (YYYY/MM/DD, DD/ MM/YYY or MMDD/YYY), the time format (12/24 hrs), the time, and the date. Use LEFT and RIGHT buttons to move to next field. Use UP or DOWNbuttons to change the setting, pressing the OK button to save the changes.

Photo Stamp

Select ON to record the temperature, moon phase, date, and time on each photo (only for photos). Select OFF for no imprint.

Format Memory Card

Delete (erase) all files stored on a card to prepare  it for reuse. Always format a card that has been previously used in other devices.CAUTION! Make sure you have downloaded and backed up any files you want to preserve first! Press OK to execute, press MENU to exit without formatting.

Password Protection

Select ON if you want to use a password to protect the camera from unwanted access, You can set a 4-digit combination. Once the code is set, the camera will prompt you to enter the correct code. If you forget the number combination, proceed as follows to unlock the camera and to reset it to its factory default settings:

  • Copy the file FWDLJA.bin from the supplier onto an empty memory card.
  • Insert the memory card into the device while the camera is in OFF Mode.
  • Keep the button pressed while moving the operating mode selector switch to the TEST position. Keep the button pressed.
  • After about 5 seconds the camera reset finished.
Serial No.

Select On if you want to use a serial number to rank the camera. You can set a 4-digit combination. This helps multi-camera users identify the location when reviewing the photos, since each camera will imprint its number on all photos it captures.

Camera Operation
Reset to Factory Setting

Select Yes and press OK to restore all parameters to the original factory default settings.

Aligning the Camera

In TEST mode, you can work out the optimum exposure angle and the range of the motion sensors. During alignment, consider whether the use of the side motion sensors may be useful for attaining the desired observation results. You can activate/deactivate the side motion sensors by following the steps on Page 12.Align the camera as follows:Fasten the camera to a tree or a similar object at a height of 3-6 feet and align the camera in a desired direction. Then move slowly from one side of the target area to the other side. While doing this, monitor the motion display.

  • If this lights up in BLUE, you have been detected by one of the activated side motion sensors.
  • If it lights up in RED, you have been detected by the front motion sensor. In this way, you can work out the best alignment for the camera.

The motion display only lights up when the operating mode selector switch is in the TEST position and one of the motion sensors has detected movement. During normal operation, there will be no LED display in this case.To ensure that the camera does not make unwanted recordings of relevant movements, it should not be set up in a sunny location or close to branches that move in the wind. The recording angle of the sensors is about 100° from corner to corner; and the recording field for  photos and videos is around 89°.

CAMERA IS READY TO USE – Switch to ON ModeAfter changing to the desired settings and simply sliding to ON Mode, the camera is in active standby mode and will record media according to the switch settings.Firstly, the motion indicator LED will blink red for about 15 seconds. Any motion detected by the side PIR sensor will be captured by the camera without a trigger.As soon as the further motion is detected by the central PIR sensor within 5 minutes, the camera will take photos or videos. Otherwise, the unit will return to standby status.

Viewing/Deleting Photos/Videos
Reviewing Images on the Camera LCD
  • Make sure the camera is in TEST mode.
  • Press the REPLAY button to enter Image Review.
  • Use the UP/DOWN buttons to toggle through your photos or videos.
  • A zoom feature is available for still photos:Use the SHOT/OK button to zoom in or out.Press the REPLAY button at anytime to exit.
  • Press the OK button to play or pause a video.
Activate Slide Show

This function can be used to play back the photos that stored on the memory card automatically.Each photo will be shown for about 2 seconds. To stop the slide show and keep the current image permanently on the screen, press theOK button.

Deleting Photos/Videos
  • Make sure the camera is in TEST mode.
  • Press the REPLAY button to enter Image Review.
  • You will see the Delete options when press the MENU button.
  • You can choose to delete only the current photo/video, or all photos/videos.
  • Press OK to Delete.
  • Press MENU to cancel the operation without deleting any files.
Viewing/Deleting Photos/Videos

Write Protection

This function can be used to protect individual recordings or all saved recordings from accidental deletion.

  • Select Write-protect current file to protect the selected recording from accidental deletion.
  • Select Write-protect all files to protect all saved recordings from accidental deletion.
  • Select Unlock current file to remove the write protection for the selected recording.
  • Select “Unlock all files” to remove the write protection for all saved recordings.
Viewing/Deleting Photos/Videos
Reviewing Images Directly from the SD Card

This is the most popular method of viewing images. Removing the SD card and take it to your home or campsite to view the images by using an SD card reader connected to your computer (some computers and TVs have a built in SD card slot).

Reviewing Images by Connecting to a Computer

When using a PC (or Mac) to view photos (or video clips), first, connect the device to the  computer with a USB cable (supplied). It will be recognized as a Mass Storage. You can view images and videos in the folder \DCIM\.

Reviewing Recordings on an External Monitor

A TV monitor can also be used to play back pictures (or videos) from the device, Connect a TV to the camera using the supplied cable.Then:

  • Set the video input source of the TV to video.
  • Change the camera to TEST mode.
  • Use REPLAY/UP/DOWN/OK/SHOT buttons to view photos/videos.
Wi-Fi Feature

Step 1. Download the Trail Cam App from the App Store;Step 2. Change the camera to ON Mode;Step 3. The screen will automatically enter the Sleep Hunt Mode after 15 seconds (if the device is in Sleep Hunt Mode already, please skip step 2 and 3);Step 4. To turn on the Wi-Fi feature, press the ON button on the remote control for 3 seconds. The camera will automatically enter the Wi-Fi mode after being turned on with the remote control;Step 5. To connect the Wi-Fi with your cell phone, open the Trail Cam App and select Storage Setting or Information Preview, the Wi-Fi Connect window will be popped up automatically. Or go to the Wi-Fi connect on your cell phone; find the WiFi Hotline named Trail Cam XYZ, and then enter password 12345678 to connect with the Wi-Fi.Step 6. After connected with the Hotline , go back to the App interface and operate the functions accordingly.Step 7. Go back to the Main Menu after finishing  up the settings in the App. Click the Power Button on the upper right corner or exit out the App. Press the OFF Button for 3 seconds to make the camera enter the Sleep Hunt Mode.

Note:1. When connected with Wi-Fi, make sure to keep the cell phone and thecamera as closer as possible. The stronger and more stable the Wi-Fi signal is, the faster the download speed will be.2. Once the App operation is complete, exit out the App and disconnect the Wi-Fi connection. Turn off the camera with the remote control to enter the Sleep Hunt Mode for saving the battery life.3. When the camera enters the Wi-Fi mode, if the cell phone did not connect the Wi-Fi after 3 minutes, the camera will automatically enter the Sleep Hunt Mode.4. When the Wi-Fi connected successfully, if there is no signal transferring between the H1 and the cell phone after 3 minutes, the Wi-Fi will be disconnected and enter the Sleep Hunt Mod

Trouble Shooting
FAQs
Photos did not capture any subjects of interest

These are the result of placing the camera in an environment where there is motion associated with tree branches creating motion or an area where there is high heat in the foreground and any motion from wind. Setting a camera up over water is also a potential cause for this issue. To remedy this situation:

  1. Try moving the camera to an area that does not have any of these issues.
  2. If the camera continues to take images of no interest subject, try placing the camera in an inside environment and aiming at a location where there is no motion.
  3. If the camera continues to show issues, please contact our customer service.
Battery Life is Shorter Than Expected
  1. Battery life varies with operating temperature and the number of images taken over time. Typically, the camera would be able to capture several thousand images before the batteries die.
  2. Check to make sure you have used new alkaline batteries.
  3. Make sure that the power switch was turned to the ON position and not in the TEST modes.
Camera won’t take images
  1. Please make sure that the SD card is not full. If the card is full, the camera will stop taking images.
  2. Check the batteries to make sure that they are new alkaline.
  3. Make sure that the camera power switch is in the ON position and not in the OFF or TEST modes.
  4. If the SD card has its write protect switch in the lock position,the camera will not take images.
  5. If you have used an SD card in another device before, you might want to try formatting the card before using it in the trail camera.
Camera Won’t Power Up
  1. Make sure that you have installed at least a full set of 4 batteries in correct position.
  2. Make sure that the batteries are installed correctly, observing proper polarity.
  3. After moving the switch from OFF to TEST or ON Mode, make sure that the switch is correctly in position to ensure the proper mode.
  4. Do not move the switch directly from ON to TEST, always move the switch all the way down to OFF first, then back up to TEST.
Still Photo and/or Video Quality Problems
  1. Night photos or videos appear too dark.a. Check the battery indicator icon to see if battery power is full. The flash will stop operating near the end of the battery life.b. You will get the best results when the subject is within the ideal flash range, no farther than 65FT.c. Please note that when the Capture Number parameter is set higher than 1 Photo, or with very short interval settings, some images may appear darker than others due to the quick response and rapid re-triggering of the camera, allowing less time for the flash to fully recharge before firing again.
  2. Daytime photos or videos appear too darkMake sure that the camera is not aimed at the sun or other light sources during the day.
  3. Night photos or videos appear too bright.Subjects may appear too bright at closer distances.
  4. . Daytime photos or videos appear too bright .Make sure that the camera is not aimed at the sun or other light sources during the day.
  5. Photos with streaked subject. a. In some cases with low lighting conditions and fast moving subjects, the 12MP or 16MP resolution settings may not perform as well as the 8MP setting.b. If you have multiple images where fast moving subjects produce streaks on the photo, try the 8MP setting instead.
  6. Short video clips-not recording the set length. a. Check to make sure that the SD card is not full.b. Make sure that the camera has good batteries in it. Near the end of the battery life, the camera may choose to record shorter video clips to conserve power.
Trouble Shooting/FAQ
Date/Time Stamp not appearing on images

Make sure that the Time Stamp parameter is set to ON.

PIR Sensor LED Flashes/ Doesn’t Flash
  1. When the camera is in TEST mode, a special LED on the front of the camera will flash  when it senses motion. This is for setup purposes only and will help the user aim the camera.
  2. During use, the LED will not flash when the camera takes an image. This is to help keep the camera hidden from game.
Camera won’t retain settings Doesn’t Flash

Make sure that you have been saving the changes to any parameter settings that you made while in TEST mode, by pressing OK after changing thesetting.

Moisture or Ants inside Camera
  1. To ensure humidity or rain is kept out of the camera, secure the DC Port plugged firmly in  place.
  2. Ants can be attracted by low level electronic vibrations, and enter through any gaps between the exterior and interior of the camera. Make sure the DC Port plug is securely attached.
Camera Specifications

IMAGE SENSOR: 8MP CMOS sensorFILE FORMAT: 20MP: 5200×3900; 16MP: 4608×3456; 12MP: 4000×3000; MP: 3264×2448; 5MP: 2592×1944; 3MP: 2048X1536LENS: f=3.3; F/NO=2.0; FOV=105; Auto IR filterDISPLAY: 2.4″ TFT LCDEXTERNAL MEMORY: SD card up to 256GRANGE OF IR FLASH: 8Mx16 5DRAMINTERNAL MEMORY: 787 InchesTRIGGERING DISTANCE: 787 InchesDETECTION ANGLE OF SENSORS: 120PIR SENSITIVITY: High/Normal/LoTEMPERATURE COMPENSATION:YesPREP PIR SENSING ANGLE: 0n/0ff;120TRIGGERING TIME: 0.5 Second (When using the 4G SD card); 0.2 SecondTRIGGER INTERVAL: 5sec. – 60min, Programmable SHOOTING NUMBERS: 1-3EFFECTIVENESS: Daytime: 1.5m-infinitive. Night time: 1.5m-20mVIDEO LENGTH: 3sec-10Minutes.; ProgrammableCAMERA+VIDEO: First take Picture then Video

WarrantyProtection
FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radioed television reception, which can be determined by turning the equipment off and on, the user is encouraged  to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit  different from that to which the receiver is  connected.Consult the dealer or an experienced radio/TV technician for help.

Warranty And Disclaimers
Warranty

Up to 1 YEAR LIMITED WARRANTY

Your product is warranted to be free of defects in materials and workmanship for 1 year after the date of purchase. This warranty does notcover damages caused by misuse,improper handling and installation.In the event warranty service is needed, please contact Rexing at [email protected]

Warranty Disclaimers

We hare no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, or for damages resulting from the use of the information contained therein.We reserve the right to alter the features and contents of this publication,hardware or software without obligation or advance notice.Warranty does not extend to any accessories used with the camera.We are not responsible if you use the trail camera for illegal purposes.We shall not be obligated to perform preventative maintenance, installation, reinstallation, or maintenance. The illustrations in this manual are for instructional purposes only and may not represent actual product exactly

report this ad

Rexing H2 Trail Camera User Manual – Rexing H2 Trail Camera User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,