RoboVac User Guide
Using Your RoboVac
- Remove the sticker on the power switch, and the foam blocks beside the bumper before use.
- If you cannot remove the objects surrounding the Charging Base, check whether RoboVac can return without assistance; if not, contact eufy customer service for help.
- Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
- When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.
- Fully charge RoboVac before use. The LED indicator on the button breathes orange while charging, and turns solid blue when fully charged.
- Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the Owner’s Manual for details.
If you cannot remove the objects surrounding the Charging Base, check whether RoboVac can return without assistance; if not, contact eufy customer service for help.
button breathes orange while charging, and turns solid blue when fully charged.
Mopping
- Do not use the mopping mode on a carpeted floor.
- Wet the cloth before mopping.
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
- a. Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
- b. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored high-pile rugs or rugs thicker than 1.02in / 26mm as they may cause RoboVac to malfunction.
- c. It is strongly recommended to place boundary strips in front of fireplaces and certain areas (i.e. air vents) that may cause damage to RoboVac if entered.
- d. Keep RoboVac away from wet areas during cleaning.
- e. RoboVac may climb on top of objects less than 0.63in / 16mm in height. Remove these objects if possible.
- f. Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored floors. It is recommended to apply the Boundary Strip(s) to block off areas where RoboVac may fall.
- g. To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor.
[xyz-ips snippet=”download-snippet”]