SPECIFICATIONS
Application: SubwooferBasket Type: Cast iron with black sanded finishCone: Ultra stiff black non-pressed paper coneDust Cap: Polypropylene dust capSurround Style: High density thick stitched foamMagnet Weight: 60 oz2.5″ Single 4-Ohm 4-Layer Black Aluminum Voice Coil
Impedance: 4 ohmCEA / RMS / Peak Watts: 500 /1000 /2000Frequency Response: 28.6Hz – 1KHz
TECHINCAL DATA
Cut-out Diameter: 13.93″ (354mm)Mounting Depth: 5.98″ (151.89mm)Gap Plate Inside Diameter: 3.34″ (85mm)Gap Plate Outside Diameter: 6.69″ (170mm)Gap Plate Thickness: 0.98″ (25mm)Yoke Outside Diameter: 6.14″ (156mm)Yoke Pole Diameter: 2.4″ (60mm)Yoke Thickness: 0.23″ (6mm)Washer Diameter: 0.23″” (6mm)Weight:13.4 lbs
RECOMMENDED BOX DIMENSIONSSealed enclosure: 1.5 -1.5 cubic feetVented Enclosure: 2.3 – 3.5 cubic feet
W15K5S415″ 4-OHV SVC SURWOOFER
2000WPEAK POWER
TS PARAMETERS
- Re: 3.52 Ohm
- Le: 1.241mH
- L2: 2.098mH
- R2: 19.56 Ohm
- Cmes: 927.52pF
- Lces: 24.93mH
- Res: 31.48 Ohm
- fs: 36.08Hz
- Mms: 130.02g
- Mmd (Sd): 197.293g
- Rms: 5.894kg/s
- Cms: 0.117mm/N
- Kms: 8.53N/mm
- BI: 14.582N/A
- Lambda s: 0.002
- Qtp: 0.621
- Qms: 6.959
- Qes: 0.68
- Qts: 0.619
- Vas: 107.32391 (3.79 cu ft)
- nO: 0.55%
- Lm: 89.61dB
- Lnom: 90.16dB
- Sd: 804.25cm2
- rmse Z: 5.29%
- rmse Hx: 2.68%
- xmax: 8mm
WOOFER WIRING CONFIGURATIONS
Use the diagrams below to determine which amplifier is best compatible with your subwoofers, and to determine the best way to wire your subwoofers to your amplifier.
ONE 4Ω SVC WOOFER
Wiring one SVC sub to an amp is the most basic type of wiring. The best option is to always match the exact impedance of the sub to the exact impedance the amp is stable at. For an SVC 4-ohm sub, we recommend that you wire it to a 2-ohm stable mono amp or you can use a 2-channel amp that is stable at 4 ohms when bridged.
TWO 4Ω SVC WOOFERS
The best way to wire two SVC 4-ohm subs is to run them in parallel, bringing the load down to 2 ohm. You can use a mono amplifier that is stable at 1 ohm or 2 ohms without a problem.
[xyz-ips snippet=”download-snippet”]