ROCKVILLE RKL65MBW Marine Speaker with LED Light User Manual

Thank you for purchasing these Rockville RKL65MBW 6.5″ 2-way Marine Speakers with LED lights. Please read this guide careful-ly for proper use of your Rockville RKL65MBW 6.5″ 2-way Marine Speakers. Should you need technical assistance please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST.

INSTALLATION/WARING

Mount the cutting template at the installation

Use the drill to make the mounting holes, being careful to not rip the template.

Use a utility knife or any other appropriate tool to cut out the mounting hole.

Connect the speaker wires. (-), the right terminal is Positive (+).

Change the speaker’s LED color by using the included jumper (A) to connect the red and black wires for red (B) or the blue and black wires for blue (C).

Carefully insert the speaker into the opening and use the included mouting screws to secure it.

  • Most speaker damage is caused by amplifiers with too much power (wattage).
  • The proper way to set your gain is to turn your receiver volume to 75% of the max, and then slowly turn your gain up. The second you hear any slight distortion, turn it down one notch and leave it at that setting. Amps are not meant to be played with the gain up to the max. If this is the case, lower your gain slowly until you hear the amplifier stop clipping.

RockvilleAudio.com©2019 ROCKVILLE//Features and specifications are subject to change and or improvement without notice.

[xyz-ips snippet=”download-snippet”]


Posted

in

by