RWS1OCA/RWS12CAWIRING GUIDE
FEATURES
- High-Level InputHigh-Level inputs also referred to as speaker-level inputs, allow you to connect to the factory speaker sos. They are called High-Level inputs Wane they convert the high voltage running through factory speaker wires to one the smellier can handle. These inputs wit provide the end-user with clear well-defined sound fa opting for musical enjoyment.
- Bass Remote:Connect dash-mounted bass remote (included) via Rill cede (included).
- RCA InputConnect to your head hurts RCA outputs.
- Gain control:The gain control regulates the %ohne input to the pre-amp stage.
- Low Pass Crossover control:Adjust Levi Pass frequency from 40Hz – SSC&
- Power/Protect LED ideates
- Power connectionsSee the Wiring diagram for proper setup.
- Fuse
HIGH-LEVEL INPUT
WARNING: Use either High-Level inputs or RCA inputs. NEVER USE BOTH!WARNING: Do not use Remote Turn-on (REM) when using High-Level inputs.
WIRING |
RCA INPUT/BASS REMOTE |
| ATTENTION: The ground wire should be 8 gauge or heavier Ensure that there is no paint or other insulator at the point of contact on the chassis.WARNING: Do not use Remote Turn-on (REM) when using High-Level inputs. |
ATTENTION: II your Head Unit has an RCA subwoofer output, use a single RCA to dual RCA cable.WARNING: Use either High-Level inputs or RCA inputs. NEVER USE BOW |
 |
 |
https://vimeo.com/showcase/7766999
Go to vimeo.comishowcaseM66999 or scan the QR code and watch a short video, which shows you how to set this item up and how to use it.
RockvilleAudio.com02021 ROCKVIU.EThe intamation presented is subject to change and/or improvement without notice.
[xyz-ips snippet=”download-snippet”]