Roland V-8HD Remote iPad App Owner’s Manual

V-8HD RemoteOwner’s Manual

V-8HD Remote is a dedicated iPad application for the Roland V-8HD. Connecting the V-8HD and the iPad via USB lets you operate the V-8HD from V-8HD Remote.* V-8HD Remote can be used with V-8HD units that are running version 1.03 or later. Be sure to update your V-8HD unit to the latest version.

Connecting the iPad and the V-8HD

1. Connect the V-8HD’s USB port to the iPad.Using a commercially available connection or an adaptor cable (Lightning-USB camera adaptor), connect the unit to the iPad.
2. Turn on the power to the V-8HD.

Starting and Quitting V-8HD Remote

Starting the V-8HD Remote

1. Turn on the power to the iPad on which V-8HD Remote is installed.
2. Tap the V-8HD Remote icon.V-8HD Remote starts, and the V-8HD Remote screen appears

NOTEIf the connection status does not change to “ONLINE” (connected), re-check the connection between the iPad and the V-8HD unit.

Quitting

1. Press the Home button on the iPad.V-8HD Remote ends, and the Home screen reappears.

Part Names and Functions

For more details on setting items, refer to the V-8HD ReferenceManual, “Menu List” (PDF).

2 Operation panel	Operates the operation panel on the V-8HD by remote control.
A	[OUTPUT FADE] knob	When you tap the function name shown at the lower left or lower right of theknob, a window opens, allowing you to change the function of turning theknob left or right.
B	FREEZE [SETUP] button	Accesses the freeze function setup screen.
C	PinP 1 [SETUP] button	Accesses the PinP 1 and PinP 2 setup screen.
D	PinP 2 [SETUP] button	Accesses the DSK setup screen.
E	DSK [SETUP] button
F	[REC CONTROL] button	If a recorder that supports the “HDMI REC TRIGGER” function is connected to the output of the V-8HD, this controls the start/stop for video recording on the recorder.
G	AUTO-SWITCHING [SETUP] button	Accesses the DSK setup screen.
AUTO SWITCHING [ON] button	Turns the auto-switching on/off.
H	TRANSITION TYPE[MIX] [WIPE] buttons	Switches to the MIX or WIPE setting items.
TRANSITION TIME [–] [+] buttons	Specifies the video transition time.

Name	Explanation
I	[INPUT ASSIGN] button	Accesses the INPUT ASSIGN (input source selection) setup screen.
J	SPLIT/VFX A [SETUP] button	Accesses the SPLIT/VFX A and SPLIT/VFX B setup screen.
K	SPLIT/VFX B [SETUP] button
L	[CUT] button	When you tap the function name shown above or below the button, a window opens, allowing you to change the function of the button.For the [CUT] button:If the function is set to something other than “CUT,” the button name indication changes.For the [AUTO] button:If the function is set to something other than “AUTO,” the button name indication changes.
[AUTO] button

3  PRESET MEMORY
[1]–[8] buttons	When you tap a button (button lit), the saved settings are recalled.* The following settings are not saved in memory. Only one set of these settings are saved for the V-8HD unit.•RESET MEMORY menu•CTL/EXP menu•STILL IMAGE menu•SYSTEM menu
[SAVE] button	If you tap the [SAVE] button (making it light) and then tap a [1]–[8] button, the state of the operating panel is saved to the memory you tapped.
[INIT] button	If you tap the [INIT] button (making it light) and then tap a [1]–[8] button, the content of the memory you tapped is initialized.
4 CONNECT	This displays the connection status of the V-8HD and iPad.If this is “ONLINE,” you can remotely control the V-8HD from V-8HD Remote.Connected Not connected

Name	Explanation
5  [MENU] button	This displays the settings screen (menu) of the V-8HD unit.Tap the [Back] button to return to the previous screen.* Some of the parameters cannot be edited from V-8HD Remote.
6  STILL IMAGE OUTPUT
[1]–[8] buttons	When you tap a button (button lit), the output video switches to the specified still image.
7  Audio mixer
[SETUP] button	Selects the channel for which you can edit the character of the sound.The setup screen for the channel selected by the [SETUP] button appears.
Level meter	These display the volume levels of input/output audio.
FOLLOW indicator	This is lit if the audio follow function is turned on.
[SOLO] button	Turns the solo function on/off.
[MUTE] button	Turns the mute function on/off.
Audio level faders	Adjusts the volume level of input/output audio.

report this ad

* Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries.* Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.© 2020 Roland Corporation