RC-20003
Thank you for purchasing a Rosewill PCI Express Card.Please read the instruction manual before use and retain it for future reference.
INTRODUCTION
Features
- Supports 2 x USB 3.2 Gen 2 ports
- Supports PCIe 3.0 x2
- Compliant with PCI Express Base 3.0 Specification
- Compliant with USB 3.2 Specification Revision 1.0
- Up to USB 3.2 Gen 2 10 Gbps Bandwidth Performance with Low Latency
- Compatible with USB 3.2, USB 3.1, USB 3.0 and USB 2.0 devices
- Supports Multiple INs
- Compliant with UASP Revision 1.0
- Max. current output 3A per port
- 15-pin SATA Power connector
System Requirements
- Windows 8.x/10 (32/64-bit); Windows Server 2012
- Mac OS X 10.10 or later
- Linux 3.5 or later
- One available PCI Express x4, x8, or x16 slots
Package Contents
- 1 x PCIe USB 3.2 Gen 2 Host Adapter
- 1 x Quick Installation Guide
- 1 x Low Profile Bracket
GETTING STARTED
Hardware Installation
- Turn off the power to your computer.
- Unplug the power cord and remove your computer’s cover.
- Remove the slot bracket from an available PCI Express slot (x4 x8, or x16) .
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Secure the computer cover and reconnect the power cord.
Driver Installation
- Drivers are embedded into Windows 8.x/10 and macOS; the drivers can be installed automatically.
Technical Support Information [email protected] 1-800-575-9885Please register your product at www.rosewill.com for complete warranty information and support for your product.
References
[xyz-ips snippet=”download-snippet”]