Rowenta PU2530 Pure Air Essential User Manual

Rowenta PU2530 Pure Air Essential

Rowenta PU2530 Pure Air Essential

PRODUCT Overview

Main Unit

  • A Air outlet
  • B Control panel
  • C Air intake
  • D Handle
  • E Lifting yoke
  • F Rear housing
  • G Power line

Control buttons

  1. ON/OFF button
  2. Speed mode button
  3. Timer button
  4. Sleep mode button
  5. Child lock button
  6. Replace filter indicator
  7. Timer indicator
  8. Sleep mode indicator
  9. Timer selected
  10. Speed selected

DISASSEMBLING

SAFETY TIPS

It is essential that you read these instructions carefully and observe the following recommendations:

  • For your safety, this appliance complies with the applicable standards and regulations (low voltage, electromagnetic compatibility, environmental directives, etc.).
  • This appliance should not be used by persons (including children) with reduced physical, sensory or mental capacities or lack of experience and knowledge, unless they are supervised or have been given instructions beforehand concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure they do not play with the appliance.
  • The appliance can be used by children aged 8 and over and persons with a lack of experience or knowledge or reduced physical, sensory or mental capacities, provided they are supervised, have been trained on the safe use of the appliance and are aware of the risks involved. Children must not play with the appliance.
  • If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person so as to avoid any danger.
  • Children should not clean or perform maintenance on the appliance without being supervised.
  • For maintenance operations, please refer to the ”Maintenance” section.
  • Keep the appliance and its power cord out of the reach of children aged under 8.
  • This appliance is designed for domestic use only. It should not be used for industrial purposes.
  • The warranty will be invalidated if damage occurs due to incorrect use.
  • Do not operate this appliance in a very dusty and/or humid place or in a location with fire hazards.
  • Before use, always make sure that the appliance, plug and power cord are in good condition.
  • Never insert objects into the appliance (e.g. needles, etc.).
  • Do not pull on the power cord or the appliance, even to unplug it from the wall power outlet.
  • Unroll the full length of the cord before use.

VERY IMPORTANT

  • Do not cover the air inlets or the outlet grid.
  • Do not touch the appliance with wet hands.
  • Never allow any liquid to enter the appliance.
  • Never use the appliance in a humid place.
  • Never use the appliance close to a heat source.
  • Never place anything on the appliance or insert anything into it.
  • Do not use the appliance close to flammable objects or products (curtains, aerosols, solvents, etc.).
  • Never use the appliance in an inclined or horizontal position. Place the appliance on a flat, stable surface.
  • In the case of prolonged absence: switch the appliance off using the button (8) and unplug it.
  • Switch off and unplug your appliance before moving it.
  • Unplug the air purifier during assembly and cleaning.

OPERATING PRINCIPLE

Rowenta Pure Air Essential enables you to breathe pure air in your home and protects your health with up to 3 filtration levels as described below. Each level is essential and traps specific pollutant :

2 in 1 Active Carbon & particles filter

  • Smoke
  • Unpleasant odors
  • Chemical pollutants
  • Volatile Organic Compounds (VOC)
  • Allergens and Pollen
  • Dust mites
  • Germs and Molds
  • Bacteria and Viruses
  • Traps specific pollutants
HOW TO ACHIEVE CLEANER INDOOR AIR

In addition to using your Pure Air Essential purifier, here are some tips on how to improve the quality of your indoor air:

  • Ventilate the rooms for at least 10 min. every day, in summer and winter.
  • Maintain your ventilation system.
  • Limit the use of household products.
  • Do not smoke indoors.
  • Avoid home fragrances, incense sticks, scented candles, etc.
  • Ventilate whenever any work is being conducted in your home and for several weeks afterwards.
  • Avoid green plants that are allergenic or need frequent watering.
WHERE TO INSTALL THE APPLIANCE

Place the purifier on a flat, stable surface in the room requiring treatment.To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance. Recommended to be used in ambient conditions lower than 35°C 70%RH.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.Your appliance can operate using an unearthed plug. It is a class II (double electrical insulation ).Before switching on your appliance, ensure that:

  • the appliance is completely assembled as described in the safety instructions,
  • the appliance is placed on a stable, horizontal surface,
  • the appliance is positioned in accordance with the instructions given in this manual,
  • the air inlets and the outlet grid are completely unobstructed,
  • the filters and panel have been correctly installed (See section “Disassembling / Reassembling filters”)

IMPORTANT: You are advised to switch off and unplug the appliance when not in use.

OPERATION

  • Power Switch (1)
    • Turn the purifier on or off.
  • Speed selection (2)
    • You can select 3 purification speeds as required.
    • Low gear: in this mode, the purification wind speed is small, and the noise is low ,which is suitable when sleep.
    • Middle gear: in this mode, the purification wind speed is increased , which is suitable under the good air condition.
    • High gear: in this mode, the purification wind speed is the largest, which can quickly purify pollutants in the air ,suitable for the environment with poor air quality, such as when some one smoking.
  • Sleep mode (4)
    • In this mode, press the sleep key to count into the sleep mode, the purification wind speed is in the sleep gear. Press the sleep key again then exit the sleep mode and automatically restore to the working mode before entering the sleep mode.
  • Child lock (5)
    • In working mode, press and hold the timer button (3) plus sleep mode button (4) at the same time for 3 seconds to enter the child lock mode. Press and hold the indicator light of child lock for 3 seconds then exit the child lock.
    • In child lock mode, other keys are invalid.
  • Timer (3)
    • When the purifier is working, press the key to select the required working time(1,2,4,8 hours), and the purifier will stop working after reaching the set time automatically.
    • When the purifier is in standby mode, press the key to select the required scheduled working time (1,2,4,8 hours).The purifier will start working when reached the set time.

CARE AND MAINTENANCE

Before performing any maintenance work, switch off the air purifier using the on/off button (1). Use a damp cloth to clean the surface of the product.Important: Do not use any abrasive materials, as these may damage the surface of the product.

Frequency of cleaning/replacing the filter :
Filter Clean/replace Frequency Filter codes
Pre filter Clean Every 2 months  
2in1 Active Carbon & Particle filter Replace Every 12 months XD6220F0

Before carrying out any maintenance operation, be sure to unplug the power plug to ensure complete out of power. You can use a slightly wet cloth to clean the purifier body.Important: Do not clean it with anything that grinding nature so to avoid damaging to the surface of the purifier.

  • When reaches 95% service life of the filter mesh, the corresponding light will flash in a breathing status, and the buzzer will ring for one minute to remind the user to replace the filter mesh.
  • * The flashing light indicates that the usage of the filter mesh is about to end.
  • The corresponding light will flash in a breathing status when there is almost full of dust in the filter mesh, then you must replace it with new filter mesh. “” The indicator light flashes in a breathing status means that the filter mesh needs to be replaced.

Performing a force reset:The filter mesh indicator light on the panel is in breathing statue, the buzzer rings for one minute each time when the purifier is started, reminding the user to replace the filter mesh. After you replace it, the corresponding light will be canceled when you press the “sleep” key for three seconds and the usage of the filter mesh will be restartedIf the filter mesh is replaced before its usage, the timing of the filter mesh should be reset by force:

  1. After replacing the filter mesh, press and hold the filter mesh reset key for 3 seconds;
  2. The corresponding mesh indicator light flashes;
  3. Press and hold the rest key for 3 seconds again, the indicator light of the filter mesh goes out and the buzzer beeps twice, then the purifier will recalculate the usage of the filter mesh.
  4. The reset mode will be canceled, if there is no operation for 3 seconds

Caution :

  • The working efficiency of the primary filter mesh will be reduced if cannot be cleaned regularly
  • Do not use wet primary filter mesh
  • Do not wash or reuse too many times of the filter mesh
  • Replace the filter mesh in turns, please refer to “Before use” ——” Install the filter mesh”

You can use the following type of filter mesh for replacement:

Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.

IMPORTANT:Never use a detergent or metal object to clean the sensors.The efficiency of the sensors may be reduced if not cleaned regularly.Cleaning frequency varies depending on the operating environment of the appliance. If it is used in a dusty environment, clean the sensors more frequently.

STORAGE

When you are not using the appliance, store it in a cool, dry place with ambient conditions no higher than 35°C 70%RH.

IN THE EVENT OF A PROBLEM

  • Do not disassemble the appliance yourself. A poorly repaired appliance may be dangerous for the user.
  • Check the troubleshooting table below before contacting an Approved Service Center:
Problem Check Solution
The  appliance  does  not switch on. Is the power cord connected? Connect the power cord to a plug with the correct voltage.
Are all the display elements off? Press the on/off button and select the required function.
Is there a power outage? You can use your purifier once the power turns on again.
The flow is a lot weaker than before. Does the filter need to be cleaned or replaced? Check the filter cleaning and replacement frequencies and clean/ replace the filter(s) if necessary.
There  is  an  unpleasant smell coming from the air outlet. Is the sensor lens covered with dust? Check the filter cleaning and replacement frequencies and clean/ replace the filter(s) if necessary.

WARRANTY

Do not use the appliance and contact an Approved Service Centre if:

  • your appliance has been dropped;
  • your appliance or its power cord are damaged;
  • your appliance no longer functions properly.

You can find a list of Approved Service Centres on the Rowenta international warranty card.

HELP PROTECT THE ENVIRONMENT!

Your appliance contains many materials which can be recovered or recycled.Leave it at a local waste collection point or take to an approved service center so that it can be processed.These instructions can also be found on our internet site, at www.rowenta.com

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,